Question about 2006 Suzuki Reno

1 Answer

Trouble Shooting Codes

My engine light is on. I took the car to auto zone to diagnose the problem. They gave me numerous codes that were displayed on the machine, but they did not have specific info for my car type. The trouble shooting codes are as followed:
P2101 -  Throttle actuator P0300 - Random misfires  P2110- Something to do with the throttle and RPM P0496- Something to do with Pressure in the EVAP system P2135-  Throttle voltage fault
Any more info would be greatly appreciated.

Posted by on

  • niabir_254 Sep 30, 2008

    Ok Thanks!     I will check that out , and report back soon!

  • Anonymous Mar 13, 2014

    Cylinder is not firing and the engine is very unstable. i disconnected the igniter connector and the engine come to a little stability, which is very strange also the idle rmp is around 2000. check the following:
    Wiring: all ok signal, power and ground points
    Scope: 3rs and 4th cylinder ignitors are firing and the scope is also fine. problem is with 1st and 2nd cylinder.
    Cam and crank scope is fine.
    Mechanically: Compression is as follows 120, 120,120 and 100
    Leakage: 10%, 10%, 10% and 23% respectively for 1, 2, 3 and 4 cylinder

    Kindly help me out here is there something i am mising out.

    Kindly note the Throttle body is malfunction and the error codes are as follows:
    P0660: Intake manifold change over control valve bank1
    P2119: throttle valve motor control component defective

    The spark plugs were clogged has been replaced.


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 298 Answers

It sounds like the throttle position sensor (TPS) needs to be replaced. When the TPS sensor goes bad it will give you the codes you received.

Posted on Sep 29, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Check engine light is on autozone gave P2270 after checking it? What does this mean?

This P2270 trouble code refers to the post-catalytic converter O2 (oxygen) sensor on bank #1, sensor #2.

Check this site:
P2270 O2 Sensor Signal Stuck Lean B1S2

P2270 O2 Sensor Signal Stuck Lean B1S2

Feb 28, 2015 | Cars & Trucks

2 Answers

Engine service soon light indicator is on

go to auto zone and they should read the code for free and point you in the the direction to fix your problems what ever code is first fix that first then do the next thing

May 27, 2011 | 2000 Nissan Xterra

1 Answer

I have a 2006 Pontiac G6; 4 cylinder...the check engine light is on and I need to get it off for my emissions test so I need help finding out what the problem is. Ive had the car put on the scanner twice...

when you changed the parts did you have the codes cleared ? as if the comp stored it then it will return and when you put new parts on it took the comp time to test and display new changes.

Jan 19, 2011 | 2006 Pontiac G6

1 Answer

The car is back firing and juderring, it seems like it is starved of fuel but hte tank is full, also the engine management light is staying on

imasuming you mean the check engine light is on. if so go to an auto parts store that reads your codes for free. like auto zone or advanced auto.etc you need to find out the details of that code or codes. this will help you narrow down your trouble shooting.
if you cant drive it there here is one small thing you can do disconect the pig tail from the mass air flow see if it runs any better. it will still be ruff. if the engine is running now plug it back up if the engine gets worse and dies thats your most likely problem the mass air flow. you might have to do it a couple of times . this was just one way to trouble shoot one posability . thats why you need the cone and a print out of trouble shooting for the codes

Aug 11, 2010 | 2002 Kia Sportage

1 Answer

Check engine light comes on and over drive light flashes on the dashboard,what should i do to fix this?

go to your nearest auto zone or advanced auto they will check you code for free ,others also do this for free get a print out of the codes and trouble shooting tips

Aug 06, 2010 | 1998 Kia Sephia

1 Answer

Check Engine Light

go to an auto parts store , like advanced auto or auto zone , they will check your codes for free. ask them for a print out ,also ask for a print out of possible trouble shooting tips .some times there printers are down so take a pen and paper and write it down. example of what you need to post on fixya. p0103 mass air flow voltage out of range. this will tell the expert that you have a malfuntion in your air flow meter/sensor .

Apr 12, 2010 | 2005 Kia Sedona

1 Answer

Random check engine light on 1999 1.6 xs s40 volvo

The light is indicating an emission system failure. Take the vehicle to your local Auto Zone or Advance Auto and ask them to scan your car for trouble codes, they will do it for you at no charge. Write the codes down and reply back to me and we can begin diagnosing the problem.
Good luck, let me know.

Jul 15, 2009 | 2000 Volvo S40

1 Answer

Car running like its missing; hesitant to start @ times

Is the service engine light on?
If so, take the car to your local Auto Zone or Advance Auto Parts store and ask them to scan your car for trouble codes, they will do it for you at no charge.
Write the codes down and reply back, we can get started diagnosing.
Let me know.

May 14, 2009 | 2005 Chevrolet Impala

1 Answer

Coolant sensor was replaced still get check engine light

If the code in the ecm isn't cleared then it will come back. Have them clear all codes and see if it persists.

Dec 09, 2008 | 2000 Lincoln Navigator

Not finding what you are looking for?
2006 Suzuki Reno Logo

906 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

71162 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides