a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
OK, if the cable is the part that broke AND it broke at the handle, then you can use a pliers or vise grip to grab the end and pull on it to pop the hood, if it broke somewhere inside the cable, then you will need some needle nosed pliers to reach under the hood and grab it there. if it broke off at the hood latch itself, then you will need to get/ make a hook or pushing rod to engage the mechanism directly to release the latch and then replace the cable the latch looks like this:
OK, if the cable is the part that broke AND it broke at the handle, then you can use a pliers or vise grip to grab the end and pull on it to pop the hood, if it broke somewhere inside the cable, then you will need some needle nosed pliers to reach under the hood and grab it there. if it broke off at the hood latch itself, then you will need to get/ make a hook or pushing rod to engage the mechanism directly to release the latch and then replace the cable
Someone with a lot of patience and persistence can use a strong piece of wire such as a straightened coat hanger to release a hood latch from underneath the car. It is a good idea to have someone press down on the hood to release spring tension. Yanking on the inside release won't accomplish much. I have done this task. It wasn't fun
you can use needle nose pliers pull the hood release cable on inside car where cable broke from handle.needle nose pliers will help you enough to pull cable to open hood so you can replace fix hood release handle and cable.
The cables and latch become dirty and corroded,and the spring wrapped cabbles can even rust on the inside.
The cable itself may have broke.
if you are able you can lay down under the front reach up through the grill and you just have to feel your way take a short screw driver and feel where the cable connects to the latch,use the screwdriver for a lever and pry the latch open.
once it is open have someone pull the release and watch for movement,if it does clean the latch ,spray cable lube into the cable while moving.
then adjust the latch a little,not to much at a time or the hood will be loose.
Of course if there is no movement in the cable it means its broke and will have to be replaced
Outer sheath of release cable has perished. You need to disconnect the cable from the inside , hold the end of cable with pliers and push forward the outer sheath with v shaped tool eg clawhammer and there will be movement of the cable on the latch side releasing it. Hope this helps
if cable broke under hood u will have to use a pliers to pull on cable or a screw driver to pry latch release==unbolt lower valance and reach up behind grill and using pliers grab and pull on latch cable or use screwdriver and pry latch at cable connection --if pull latch broke inside remove kick panel and expose cable using a vise grip or pliers pull cable to open
If the cable is not broke have someone pull on the latch inside while you repeatedly press down on the hood. It might take a few tries but it should finally pop. Once it does open spray the latch and linkage with a silicone spray to get it lubricated and do this frequently to prevent it from happening again. If the cable is broke inside at the handle you will have to remove the kick panel, strip the coating back on the cable and pull the cable with a pair of pliers it should release. If the cable is broken under the hood, you will need to remove the grill and use a screw driver to release the latch.
Someone just successfully helped me with a similar problem. IF the cable is Not broken, ie: still taunt when one pulls the hood release lever in the car, then the latch under the hood is simply stuck. Try this. Have someone bounce/press down on the front center of the hood where the latch is located to relieve spring tension. At the same time have someone pull the Hood Release lever inside the car. This may pop open the front hood. Then after the hood opens spray WD40 on the hood latch to rid the rust which likely is the cause of the problem. BTW...don't know what you mean about the Oil Light comes on. You don't need the engine turned on to open up the front hood, at least not on my model (2door sedan).