Question about 1991 Acura Legend

1 Answer

91 acura legend

How to clear abs code

Posted by on

  • Anonymous Nov 01, 2008

    timing belt

  • yadayada
    yadayada May 11, 2010

    ABS codes clear themselves when the fault is corrected that caused the light to come on ans set a code.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a connector under floor mat on front passenger side.
With the car turned off, jump this contactor out and turn the car to on position. After 2 seconds the abs light will blink given you codes.
After you fix the problem, you will need to remove the jumper, and pull all 3 abs fuses. Wait 3 seconds a reinstall the fuses. Now plug the connector back into its holder.
Now start the car, and the code should be cleared.

Posted on Nov 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 91 acura legend my cruise control was working but stopped working what caused this?


You'd have to find out of your cruise control is vacuum or electronically operated. Then, you'd have to begin diagnosing to determine the problem. DO you have any codes at all ?

Nov 22, 2016 | 1991 Acura Legend

1 Answer

I have a 1993 acurA legend two door, what do tcs mean on my dash board


TCS (traction control system, I think) is part of the ABS (anti-lock brake system). This system self diagnoses and stores codes in its control module. You need to get the code read and diagnosed by a competent shop, that may need to be an Acura dealer. This is important, I have seen some failures cause braking issues.

Apr 05, 2015 | 1993 Acura Legend

1 Answer

The radio code for a 91 acura legend 2 dr


The code was issued on two cards that came with the car documentation. If they are not with the car anymore any acura dealer can give you the code if you go there with the car. The code is matched to each car's vin number so they will need to see that the radio is in the car.

Nov 20, 2010 | 1991 Acura Legend

2 Answers

I need my code for my radio in my 91' acura legend


You need to get the serial number off the sticker attached to the radio. It will require pulling apart your dash. Call an Acura dealership with that serial number and they should be able to provide you the code. Or you can take it directly to the dealer but you will be charged labor.

Apr 18, 2010 | 1991 Acura Legend

1 Answer

Bleeding the brakes on a 91 acura legend with abs


look for divider block that all lines from brakes come to below master cylinder.some are mounted in frame and others on fire wall below master cylinder.could be trash blockage there.possible solution is to undo lines that are giving you trouble there and at wheel cylinders and blow out with air and pressure flush with fluid to determine good flow.then reconnect and bleed again.hope this helps as you sound like a good wrench spinner...chris

May 13, 2009 | 1991 Acura Legend

5 Answers

91 acura legend will not start


Take off the hose to the throttle body and look for any obstructions. This has been know to cause performance issues similar to those described

May 07, 2009 | 1991 Acura Legend

1 Answer

1990 acura legend body kit


a 91-95 bodykit will not work unfortunatey.but you can purchase one for older legends. Try Hondatuner magazines website

Apr 14, 2009 | 1990 Acura Legend

1 Answer

I need unlock code for a 91 acura legend


ITS ON THE DASH . LOOK AT IT STANDING FROM OUT SIDE LOOKING THROUGH WINDSHIELD ON DRIVER SIDE. AND REGISTRATION CARD ALSO HAVE REGISTRATION OR SERIAL NUMBER.

Apr 13, 2009 | 1991 Acura Legend

1 Answer

91 acura check engone light is on code 1an3 what could be the pro


I'd go get a reading from an auto parts store!
Advance Auto Parts will usually do this for free!
Are you having any noticeable problems besides the code lights?
Hope this is helpful!
Good Luck!

Jan 20, 2009 | 1991 Acura Legend

Not finding what you are looking for?
1991 Acura Legend Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...