Question about 1995 Jeep Grand Cherokee

2 Answers

MY TIME DATE ARE BLINKING WILL NOT STOP CANT RESET

DRIVING ME NUTS HELP

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Ahh the center warning panel is an easy fix. hold down both buttons on the right hand side till the hour numbers flash, use the select button to make changes, and the set button to switch modes.

Posted on Nov 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 5,568 Answers

Wouldn't bother me, been nuts forever -
If yours is equipped with the center screen containing date/time etc., press, no jab repeatedly the 'Select' button, maybe you can get through the crud on the contacts to get started. If this is successful, you should have something blinking. You can change it then by pressing (yeah, JABBING) the 'Set'  button until you have the date etc. you want. The switches behind those buttons are the ones they should have used for the Big Red Button in DC so no one can accidentally start a war.
BTW, if yours is like ours, the time (just to be completely moronic) is set via the radio with two tiny (also unreliable) switches you must access through tiny holes with your best ballpoint to set the time that will appear on that annoying panel.       

Posted on Oct 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, have a citroen Ds3 dsport...anti pollution fault, asr/esp, limp mode...need to get out of limp mode to accelerate to clear system... Need help as it's driving me nuts!!!!


the limp mode will not allow you to accelerate until you have fixed the problem and reset the ECM
Limp modes are not there to help ease you frustrations but to prevent costly repairs to the engine and transmission
fix it , reset it then you will have no need to go nuts

Aug 13, 2016 | Citroen Cars & Trucks

1 Answer

Flashing clock after dead battery?


The car manual will tell you how to reset the clock. Or contact the dealer OR
go to manufacturer web site for manual download.

Nov 18, 2015 | 2006 Renault Scenic 1.9

1 Answer

Clock and date settings


Depends on the type of BSI ( computer under steering column) and type of the display, using peugeot software you can configure date and time, or you just need refit the original radio for few minuts, set date and time and take it off again and put back the non original stereo again, that will take only 15 minuts

Jan 12, 2014 | 2006 Peugeot 207 1.4

3 Answers

How do I reset my maintenance required light on my 2009 Avalon?


SWITCH IGNITION ON WITH ENGINE OFF.PRESS SMALL ROUND BUTTON ON LOWER RIGHT OF THE SPEEDOMETER UNTIL IT DISPLAY ODOMETER.THEN TURN OFF IGNITION SWITCH OFF.PRESS AND HOLD SAME ROUND BUTTON LOWER RIGHT SPEEDOMETER TURN IGNITION TO ON WITH ENGINE OFF.CONTINUE TO HOLD BUTTON FOR AT LEAST 5 SECONDS UNTIL IT DISPLAY INDICATES 000000 AND MAINT REQUIRED LAMP WILL EXTINGUISH.RESETTING IS COMPLETE.

Oct 19, 2010 | 2008 Toyota Avalon

1 Answer

My engine light is on, the brake light comes on and the speedometer stops when that happens, my key is stuck in the ignition, and the blinking arrow won't stop blinking. I am a first time volvo owner. I...


Brake light comes on auto each time you start the car (saftey check) and will go off when you press brake pedal.

Blinking arrow will stop when you click seat belt together (driver)

turn ign off press key in towards drive stem and turn anti clock (5degs)and pull out

Put in key hold in mileage reset button and turn key to on (dont start the car )the last click before starting (and keep finger on miles reset button till flashing stops
then turn off ,this resets all service lights,
tc

Oct 02, 2010 | 2000 Volvo S70

1 Answer

My air bag light keeps blinking. the light started blinking while driving the vehicle and coming to a stop at a stop sign. How can I fix this problem.


IM NOT SURE BUT THAT MEANS SOMETHINGS WRONG DRIVING IT COULD DEPLOY AND HURT OR KILL SOMEONE I WOULDNT DRIVE IT TILL I GOT IT FIXED

May 18, 2009 | 1998 Oldsmobile Aurora

1 Answer

1994 Jeep Grand Cherokee Resetting the electronic dash.


with the key off, push and hold reset. Then set the date and time.

Apr 30, 2009 | 1994 Jeep Grand Cherokee

1 Answer

1997 Grand Cherokee Laredo


maybe washer fluid getting low?

Dec 21, 2008 | 1996 Jeep Grand Cherokee

1 Answer

Time and Date Memory


This happens to me on my 1002 A6 1.8T. Lights warning light is a problem with a microswitch in the drivers door locking mechanism.

The date & time, I dont know!

Jun 10, 2008 | 2001 Audi A6

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...