Wiring problem on driver's side door

Are you asking how to fix this? or where to get the part that you need too fix it? If you need the wiring harness plug, you should be able to get it from any local junkyard, just tell them what kind of car and which door. If you need a new switch also they should have that too. Now if you are asking how to install the new wire harness plug then all you have to do is take off the door panel and unhook the plug going to the switch. The switch will pop up out of the armrest if you need to replace it. To fix the wiring just match the colors of the wire harness plug that you got from the junkyard to the wiring harness attached to the switch. You will just have to splice them together and then use electrical tape to wrap them separately. The colors and number of wires should be an exact match if not then you most likely do not have the right plug. This should FixYa :) Hope it helps and dont forget if it still does not work after you change the plug, it could be the window motor or the fuse. None of the windows will work if it is the fuse.