Question about 1996 Isuzu Rodeo
How do you replace the alternator on a 97 isuzu rodeo
From Yahoo answers
The alternator is located on the passenger side of the motor at the bottom. There is a bracket attached to the motor and the alternator. You need not take the bracket off to remove the alternator. Two bolts hold the alternator to the bracket. One bolt is on the front top of the alternator and one bolt is located on the bottom front of the alternator. The bottom front bolt is attached to the tension adjustment for the alternator. Loosen the tension screw then remove the bolt going through the tension adjustment. After you loosen the top, front bolt, the alternator should be loose enough to move side to side. Remove the top, front bolt. Now you must disconnect the alternator from the power supply. Behind the alternator is a screw with a wire attached via nut. Remove this wire. Nextly there is a series of wires with a plug on the end. It is plugged into the side of the alternator. Uplug this item. You can also access both of these from the passenger side front tire well. Something to consider is that remanufactured alternators in Rodeo's as well as the Honda Passport (which has the same engine as the Rodeo) do not work and the problem(s) associated with a bad alternator,ie; not charging, no fan blower, battery light and brake light on, still exsist after replacing alternator with reman. Use a factory original alternator if possible. It will cost a little more than a reman but will most likely save you a lot of time and headache!
Hope this helps you out!!
Posted on Sep 29, 2008
Had same problem.reman alts for rodeo missing circuits.
Posted on Oct 21, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 97 isuzu rodeo
look carefully as power steering belt has to be removed and A/C if fitted,slacken bolts on power steering pump then find the tensioner bolt and slacken it off and then push pump unit back..Same sort of thing with the A/C pump but i think but cant remember but i sure this one has an idler/tensioner to slacken.
Posted on Jan 10, 2009
Tips for a great answer:
Jan 31, 2012 | 1996 Isuzu Rodeo
Dec 14, 2010 | 1994 Isuzu Rodeo
May 12, 2010 | 2003 Isuzu Rodeo
Feb 09, 2010 | 1997 Isuzu Rodeo
Jan 12, 2010 | 1997 Isuzu Rodeo
Oct 29, 2009 | 1997 Isuzu Rodeo
Jul 07, 2009 | 1993 Isuzu Rodeo
Apr 25, 2009 | 1997 Isuzu Rodeo
Jan 11, 2009 | 2002 Isuzu Rodeo
Jan 10, 2009 | 1997 Isuzu Rodeo
Apr 18, 2016 | 1996 Isuzu Rodeo
2,292 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: