Question about Toyota Corolla

2 Answers

Check engine light in 2006 Toyota Corrolla..code P2716. Do you think this condition is under warranty?

Posted by on

  • 3 more comments 
  • ks32708 Sep 30, 2008

    I had the same problem with my 2005 Corolla, It caused me to fail a yearly state inspection!!!! When I took it to toyota dealership they refused to cover it because I was over mileage...... $900 part fix.

  • Anonymous Dec 11, 2008

    i got the same problem my car is 60,000 mile i got to call the dealer and fix this check engine light 

  • Anonymous Jan 08, 2009

    2005 corolla engine light is on,51000 m.not sure if is covered under 60000m warranty

  • Anonymous Mar 04, 2009

    go to your toyota dealer your ecu needs to be replace most likely my 05 corolla had the same problem.

  • Anonymous Apr 22, 2009

    same problem with my 2007 corolla- 46600 miles on it. took it in and was under warnty- thank god otherwise would have cost over $800.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

P-2716 refers to a harsh shift, and the issue is in the logic of the ECU. It is a known issue with Toyota. This repair is covered for 96 months or 80,000 miles, whichever comes first.

Take your vehicle to a Toyota dealer, and have them perform the repairs outlined in Technical Service Bulletin TC015-07. They will replace the ECU if you vehicle has less than the time & mileage as described above.

Posted on Sep 29, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i m jitendra. my problem is not look for mil light.

Posted on Aug 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is P2716 code for a 2006 Corolla mean?


It is common for a failed engine control module to call this code. First you can replace the solenoid and test the wiring and if problem is still there replace ecm. Let me know if you have questions, thanks.
P2716 Pressure Control Solenoid 'D' Circuit Malfunction
Possible Causes Setting Conditions
  • Shift solenoid (SLT) connector is damaged (check pins for damage, moisture)
  • Shift solenoid (SLT) control circuit is open or shorted to ground
  • Shift solenoid (SLT) has failed (electrical fault)
  • ECM has failed


Read more: http://www.justanswer.com/toyota/2zd2p-toyota-code-p2716-repair-it.html#ixzz3XycnoMij

Apr 21, 2015 | 2006 Toyota Corolla

1 Answer

I have a 2006 Toyota Corolla, only 17k miles, bought from Carmax in mid-2007. My check engine light came on, had it checked, and it read P2716 - Pressure control solenoid D electrical fault. Probable...


DTC P2716 - Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)

If you need to test this electrical components and wiring. Tell me if you need the TSB about this DTC.

Dec 29, 2010 | 2005 Toyota Corolla

1 Answer

Code P2716


There is a known issue with the 2005-2007 Corolla automatic transmission shift logic. The shift points may seem harsh, and the Check Engine light may be illuminated.

There is a technical service bulletin published (TC015-07) that will address and rectify this condition.

The diagnostic code P2716 will be stored in the computer memory. The procedure involves replacing the Engine Control Module (the computer) with an updated unit.

The repair is covered, under the factory warranty, for 96 months, or 80,000 miles, which ever comes first.

I hope that this helps Corolla you out.

May 05, 2010 | 2005 Toyota Corolla

1 Answer

I'm getting a check engine light with error code P2716 when doing an emissions test. What problem do I have?


Hello, welcome to FixYa!

P-2716 indicates a problem in the logic inside the car's electronic control unit, or the 'computer'. There is nothing that can be 'fixed', the problem is in the programming of the computer

Toyota is aware of this condition, and has issued a technical service bulletin to correct the condition.

Toyota will replace the car's compute under warranty (free) if your car has less than 80,000 miles on it.

Thanks for choosing FixYa for advice today.


Apr 30, 2010 | 2006 Toyota Corolla

2 Answers

P2716 pressure control solenoid d 2005 toyota corolla 117000 miles check engine light on


This is very common on Matrix/Corollas and is repairable by way of replacement PCM to correct invalid parameters. the labor is low but the part is very expensive.

Expect approximately $89 or less in labor, and $648 for the new PCM



Reference bulletin #TC015-07

The contents are below:

TRANSMISSION & CLUTCH
TC015-07 Title:
HARSH SHIFT AND M.I.L. "ON"
DTC P2716 Models:
'05 - '07 Corolla & Matrix (1ZZ-FE) September 20, 2007

Introduction
Some 2005 - 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.l.L. ON" with DTC P2716 stored.
Improvements have been made to the Engine Control Module (ECM) (SAE term:
Powertrain Control Module/PCM) to reduce the possibility of this condition occurring.

Applicable Vehicles
^ 2005 - 2007 model year Corolla and Matrix (2WD) vehicles equipped with the 1ZZ-FE engine.
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Federal Emissions Warranty. This warranty is in effect for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.

Oct 28, 2009 | 2006 Toyota Matrix

2 Answers

Pressure Control Solenoid D electrical fault (P2716)


There is a Bulletin on this concern, and it is a warrantable condition for 8 years or 80,000 miles so you are still covered by the factory warranty.
The problem is a logic issue in the PCM. The correction is a new PCM with updated software.


Reference bulletin #TC015-07

The contents are below:

TRANSMISSION & CLUTCH
TC015-07 Title:
HARSH SHIFT AND M.I.L. "ON"
DTC P2716 Models:
'05 - '07 Corolla & Matrix (1ZZ-FE) September 20, 2007

Introduction
Some 2005 - 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.l.L. ON" with DTC P2716 stored.
Improvements have been made to the Engine Control Module (ECM) (SAE term:
Powertrain Control Module/PCM) to reduce the possibility of this condition occurring.

Applicable Vehicles
^ 2005 - 2007 model year Corolla and Matrix (2WD) vehicles equipped with the 1ZZ-FE engine.
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Federal Emissions Warranty. This warranty is in effect for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.



** Please be sure to rate me if this free information has been helpful!

Sep 21, 2009 | 2006 Toyota Matrix

2 Answers

What is P2716 code for a 2006 Toyota Corolla mean?


There is currently a recall going on for this problem. You can likely get your money back on the prior repairs as well. See this link http://www.toyota.com/recall/corolla-matrix.html. On the left-hand side, you can click to take you to put in your VIN and see if your vehicle is included. My 2007 vehicle IS included, and I just had the check engine light come on and have been experiencing rough shifting for about 6 months. When the light came on yesterday, it was extremely rough jerky shifting. The light went off today. Took it to Autozone and got same code P2716. Toyota has assigned me a case number, but I won't get a call back until Monday or by close of biz on Tuesday. This problem can cause your car to not start, or to shut down while driving. YIKES! The person I talked to at Toyota acted a little too nonchalant about the whole deal. Telling me to just wait for the call that I will get. She said most dealers would not have the part needed to fix this. According to what I have read. That is the reason why Toyota is not sending out the notification letters to the affected parties until mid-September. Check out all the info and good luck. I am a little bit p.o'd about this right now. - Natalie

Sep 13, 2009 | 2006 Toyota Corolla

5 Answers

Oem code p2716


It can all be explained here: http://matrixowners.com/tsb/T-TC014-06.pdf

BOTTOM LINE: TAKE IT TOYOTA BEFORE THE WARRANTY EXPIRES @ 80,000 MILES OR 8 YEARS OF OWNERSHIP.

I had mine taken care of today free of charge, and hassle free, thanks to the service crew at Condit's Toyota.

Aug 14, 2008 | 2006 Toyota Corolla

1 Answer

Check engine ligth on P2716


There is a known issue with the 2005-2007 Corolla automatic transmission shift logic. The shift points may seem harsh, and the Check Engine light may be illuminated.

There is a technical service bulletin published (TC015-07) that will address and rectify this condition.

The diagnostic code P2716 will be stored in the computer memory. The procedure involves replacing the Engine Control Module (the computer) with an updated unit.

The repair is covered, under the factory warranty, for 96 months, or 80,000 miles, which ever comes first.

I hope that this helps you Corolla owners out.

A "FixYa" rating (4 blue diamonds) would be greatly appreciated for my assistance on your issue. Thanks in advance.

Regards,

Toyota Ed

Aug 07, 2008 | 2005 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...