Question about 1995 Cadillac Eldorado

1 Answer

94 eldorado How do I remove the water pump on a 94 cadillac eldorado touring coupe.What kind of special tool is needed?

Posted by on

  • Anonymous Mar 12, 2014

    remove headliner

  • Anonymous Mar 14, 2014

    i would like to know step by step on how to remove a radiator from a 2003 cadillac eldorado

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a special tool necessary to remove the water pump. You can purchase it from NAPA for $40.00 or email me for a discount on the tool at kdavis@americanefficiency.com

Additionally, you will needa 3/8 socket wrench as well.

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 cadillac deville flywheel replacement


1979 Cadillac Coupe 425 engine running; flywheel knocking

? 1:16
https://www.youtube.com/watch?v=UTDBmkKyBCY
Sep 30, 2011 - Uploaded by Edgar H
1979 Cadillac Coupe 425 engine running; flywheel knocking ...Change Transmission Fluid pan removal Cadillac Seville part1 - Duration: .

Exclamation Re: Found a 94 STS for $800, needs flywheel ...

www.cadillacforums.com/.../cadillac-seville-cadillac.../65815-found-94-s...

Feb 16, 2006 - 15 posts - ‎9 authors
Cadillac Seville / Cadillac Eldorado Forum Discussion, Found a 94 STS for $800, needs .... If it is somehow just the flywheel, your repair cost would be the labor involved in dropping ... Automobile(s): 1999 STS - diamond white. Re: flywheel 99 sts
14 posts
Apr 7, 2013
Re: need to replace flywheel
3 posts
Dec 3, 2011
Re: Location of transaxle to engine bolts on 1998 ...
15 posts
Nov 13, 2011
Re: How to lock flywheel without $150 tool?
7 posts
May 21, 2009
More results from www.cadillacforums.com

Jan 11, 2016 | Cadillac Cars & Trucks

1 Answer

Where is water pump located on 1999 eldorado


4.6 engines cadillac water pump front of the engine behind a cover.if you see thermostat housing you will see water pump drive belt you need a water pump tool to remove water pump.you can buy the water pump socket removal tool at any auto parts stores.

Jan 05, 2013 | 1999 Cadillac Eldorado

1 Answer

How to replace water pump on 94 cadillac edeado


Special tools are needed, so you will not be able to replace the pump, have a shop do it.

Nov 18, 2010 | 1994 Cadillac Eldorado

2 Answers

My cadillac eldorado etc 98 model needs a water pump pulley i can not find it anywhere does it go by any other name it is over heating and a we called a mech friend and he said it was the water pump and...


The water pump should come with a pulley on it or at least transfer over to the new one if it doesn't come with a pulley. Water Pump Removal and Installation All Engines To Remove:
  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section.
  2. Remove or disconnect the following:
    • Coolant into a suitable container
    • Upper filler panel
    • Air cleaner assembly
    • Secondary AIR injection control valve gm_car_cad_sev_wtr_pmp_belt_shld.gif

    • Oil level indicator tube nut
    • Water pump belt shield fasteners
    • Water pump belt shield gm_car_cad_sev_wtr_pmp_drv_belt.gif

    • Water pump drive belt (D) gm_car_cad_sev_rad_outl_hos.gif

    • Radiator outlet hose from the thermostat housing gm_car_cad_sev_wtr_pmp_and_covr.gif

    • Water pump cover bolts
    • Water pump cover
    • Heater return hose
    gm_car_cad_sev_wtr_pmp_pulr.gif

  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Remove or disconnect the following:
    • Pump from the housing:
      1. Use suitable water pump puller/installer tool (or special service tool J38816-A) to turn the pump clockwise
    • Support plate from the water housing crossover gm_car_cad_sev_wtr_pmp_rem.gif

    • Water pump
    • Seal from the water crossover
  6. Clean the sealing surfaces of the water housing crossover and the pump cover.
  7. Clean and inspect the water pump.
To Install:
  1. Install or connect the following:
    • Seal into the recessed portion of the water crossover
    gm_car_cad_sev_wtr_pmp_crosovr_seal.gif

    NOTE: The notched locking ear must be in the 7 o'clock position.
  2. Index the water pumps locking ears with the tangs in the water crossover.
  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Turn suitable water pump puller/installer tool (or special service tool J38816-A) counterclockwise.
  6. Torque the water pump
    • Torque to: 74 ft. lbs. (100 Nm)
  7. Remove the support plate from the water housing crossover.
  8. Install or connect the following:
    • Water pump cover to the heater return hose
    • Water pump cover to the water housing crossover
    • Water pump cover bolts
      1. Torque to 89 inch. lbs. (10 Nm)
    • Radiator outlet hose to the thermostat housing
    • Water pump drive belt
  9. Place the water pump belt shield in position.
  10. Install or connect the following:
    • Water pump belt shield fasteners
      1. Torque to 89 inch. lbs. (10 Nm)
    • Oil level indicator tube nut
      1. Torque to 89 inch. lbs. (10 Nm)
    • Secondary AIR injection control valve
    • Air cleaner assembly
    • Upper filler panel
  11. Fill the cooling system.
  12. Start the engine then idle until normal operating temperature is attained.
  13. Recheck coolant level and top off as needed.
  14. Test drive the vehicle.
prev.gif next.gif

Aug 17, 2010 | 1998 Cadillac Eldorado

1 Answer

Need a picture of a water pump housing for a 1998 eldorado


Water Pump Removal and Installation All Engines To Remove:
  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section.
  2. Remove or disconnect the following:
    • Coolant into a suitable container
    • Upper filler panel
    • Air cleaner assembly
    • Secondary AIR injection control valve gm_car_cad_sev_wtr_pmp_belt_shld.gif

    • Oil level indicator tube nut
    • Water pump belt shield fasteners
    • Water pump belt shield gm_car_cad_sev_wtr_pmp_drv_belt.gif

    • Water pump drive belt (D) gm_car_cad_sev_rad_outl_hos.gif

    • Radiator outlet hose from the thermostat housing gm_car_cad_sev_wtr_pmp_and_covr.gif

    • Water pump cover bolts
    • Water pump cover
    • Heater return hose
    gm_car_cad_sev_wtr_pmp_pulr.gif

  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Remove or disconnect the following:
    • Pump from the housing:
      1. Use suitable water pump puller/installer tool (or special service tool J38816-A) to turn the pump clockwise
    • Support plate from the water housing crossover gm_car_cad_sev_wtr_pmp_rem.gif

    • Water pump
    • Seal from the water crossover
  6. Clean the sealing surfaces of the water housing crossover and the pump cover.
  7. Clean and inspect the water pump.
To Install:
  1. Install or connect the following:
    • Seal into the recessed portion of the water crossover
    gm_car_cad_sev_wtr_pmp_crosovr_seal.gif

    NOTE: The notched locking ear must be in the 7 o'clock position.
  2. Index the water pumps locking ears with the tangs in the water crossover.
  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Turn suitable water pump puller/installer tool (or special service tool J38816-A) counterclockwise.
  6. Torque the water pump
    • Torque to: 74 ft. lbs. (100 Nm)
  7. Remove the support plate from the water housing crossover.
  8. Install or connect the following:
    • Water pump cover to the heater return hose
    • Water pump cover to the water housing crossover
    • Water pump cover bolts
      1. Torque to 89 inch. lbs. (10 Nm)
    • Radiator outlet hose to the thermostat housing
    • Water pump drive belt
  9. Place the water pump belt shield in position.
  10. Install or connect the following:
    • Water pump belt shield fasteners
      1. Torque to 89 inch. lbs. (10 Nm)
    • Oil level indicator tube nut
      1. Torque to 89 inch. lbs. (10 Nm)
    • Secondary AIR injection control valve
    • Air cleaner assembly
    • Upper filler panel
  11. Fill the cooling system.
  12. Start the engine then idle until normal operating temperature is attained.
  13. Recheck coolant level and top off as needed.
  14. Test drive the vehicle.
prev.gif next.gif

Aug 17, 2010 | 1998 Cadillac Eldorado

1 Answer

I have a 94 Cadi that over heats and idles high, i


back probe the throttle position sensor . it should read 5 volts or a little less. also check the wiring at the connector for damaged wiring. if all is good. remove the glove box and give me the service # off the pcm. located behind the glove box.email me at brandonday87@yahoo.com

Jul 01, 2009 | 1994 Cadillac Eldorado

1 Answer

Do i need a special tool to remove the water pump?


Hello bugzdagr8: My name is Roger and I will answer your question. Yes you do need a special tool to remove the water pump. The GM tool number is J38816-1A. You should be able to get one from a tool dealer. Snap-on ,Mac or Matco sales them. Most parts stores sell them also. The water pump has a lock plate that must be turned. Please rate the quality of your answer. This is how we know you received the correct answer.Should you need more help please just ask. Thank You for using FixYa. Roger

May 09, 2009 | 1994 Cadillac Eldorado

2 Answers

Cant get the water pump out of a 94 eldorado


if i remember right, you have to take it out counterclockwise! 4.6 engine right?, good luck to u..

Feb 26, 2009 | 1995 Cadillac Eldorado

2 Answers

1990 cadillac deville need help water pump removal???


You need a special water pump tool. you can rent one from Auto Zone. The water pump housing is the bottom radiator hose on the right side of the engine. remove the hose and the outer-caseing, the waterpump is now slightly visable. Use a .5 inch rachet with the Special tool and turn clockwise.

Oct 19, 2008 | 1991 Cadillac DeVille

Not finding what you are looking for?
1995 Cadillac Eldorado Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...