- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
are you saying the front door does'nt lock with the central locking ? if so then the cental locking is usually controlled by the drivers door lock that sends signal to the othe door locks so depending which front door it is that will be the place to start , at least you know the alarm works
remove the interior trim a nd soak locks with a nice proper oil can ,no WD40 fish oil junk but a nice drop of engine oil ,then polish car and clean leather seats and it will work perfectly ,but only if you polish the chrome as well
If you havent' already broken the door handles tugging on them, inside the door you will find a linkage with a tensioner adjustment. You need to tighten that linkage adjuster. You will find if you take off the inside door panel and pull the linkage manually the door retanier will actuate. The job is a PIA, and requires a couple of very long, very small box wrenches. Dont attempt to adjust the linkage without loosening the retaining nut, the linkage will shear right off, thus making the outer door handles permanently locked Good luck.
If the doors will open from the outside, but do not open from the inside - the child safety switches are probably activated. Open the rear doors (from the outside) and slide the small levers next to the doors locks (on the edge of the doors) upwards.
Have you tried to open it from the back seat? If you have then you will have to take off the cover on the door and there should be a release button. Most covers are easily removed with a flat head screw driver - If your door requires a motor to operate than that is your problem. Hope this helps.
need to remove the interior door panels and check all the linkages. One of them is a brittle plastic linkage that is famous for breaking, and bits get caught up in the travel path of the door handle. I had taht issue, and rebult all mine with aftermarket plastic linkages, and the metal parts I pulled from junkyard cars. No way to fix it without removing the interior door panels, but that is thankfully a pretty easy job.
the problem would be the wiring on the door, possible a break in the wire, therefore the window and the central locking isnt working, possibly the earth wire is broken, open the front passenger door and u should see a sleeve connecting to the rear door, that is where the wiring to the door is, check ! also i would check the fuses. thanks