Question about 2007 Mercedes-Benz C230 Sedan

1 Answer

Gear shift what is the CS button next to my manual transmission gear shift

Posted by on

  • Anonymous Dec 28, 2008

    i have a 'new' aquire &i dont know what the cs button is near the shifter ???

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 203 Answers

Some sort of super charger i`d say. try it but be careful you dont get done for speeding.joe

Posted on Nov 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1988 Corvette with a 700R4, not wanting to shift from 1st. to 2nd. unless I leave my foot off the gas for it to shift. Contact mac1212sr@aol.com


Transmissions have "synchros" that adjust the speed when shifting from one gear to the next, because the engine's RPMs, while correct for, say, 1st gear, are too high to shift to 2nd gear.

If you're really careful, and an expert driver, you can shift a manual transmission from one gear to the next without using the clutch at all.


However, you seem to have a transmission problem with the 1-2 synchros.

Apr 20, 2015 | 1988 Chevrolet Corvette

1 Answer

2000 Firebird - Gear shift button broken- can't shift - A/T


You could remove the handle and pull on the plastic rod, or disassemble the console to access the shift lock.
You may need a shop manual for repair info.

Jan 22, 2014 | Cars & Trucks

1 Answer

1985 pickup with automatic transmission


Could be a vac modulator problem.

Jul 04, 2012 | Cars & Trucks

1 Answer

When car is in drive it will not shift right coming out of first gear. it will **** really hard then shift.


Check vacuum hose to modulator on the transmission. One that is leaking will cause it not to shift out of first. Open hood and look for it at the front of transmission. One can shift it manually by putting in first then shift to next gear.

Aug 17, 2011 | 1991 Chevrolet Lumina

1 Answer

When do I use the d 5 gear in acura 2003 tl 3.2 liter


Pretty much all the time!

D3, D4, and D5 are all just *DRIVE* like on any automatic transmission, EXCEPT
that the number next to the D is the "highest gear the automatic transmission will go into".
The Acura just gives you a choice, in case you don't want to go into a higher gear (like if it's slippery traction or a steep hill, etc.)

1 means: Manual gear. FIRST GEAR ONLY.
2 means: Manual gear. SECOND GEAR ONLY.
D3 means: Use automatic transmission, but engine will never shift above 3rd gear.
D4 means: Use automatic transmission, but engine will never shift above 4th gear.
D5 means: Use automatic transmission, but engine will never shift above 5th gear.

Aug 04, 2011 | 2003 Acura 3.2TL

1 Answer

I have an 80 series landcruiser with A442F transmission, built 1993. It will not select 1st gear or overdrive. It takes off in 2nd and shifts to 3rd normally, 1st gear can be selected manually and changes...


It seems like your "2nd start" button is turned on. The 80 series LC has a button next to the shifter which allows it to start in 2nd gear. If the button is not engaged then there could be a problem with the circuit, but that is not common

Nov 01, 2010 | 1994 Toyota Land Cruiser

1 Answer

Transmission will not shift to next gear. 2001 jeep grand cherokee. manual transmission


If this is a manual transmission and your can't get it to go into the next gear, your clutch is probably worn out and needs to be replaced. When the clutch pedal is pressed a space in the gear box allotted for the shift stick to get in. If that space is not being created, the clutch is not working properly. I say get your clutch check out.

Sep 22, 2009 | 2001 Jeep Grand Cherokee

2 Answers

Audi won't shift out of first gear


check your inhibitors switch or the shifting cable.

Jun 21, 2009 | 1992 Audi 100

3 Answers

"Hold" Button on console beside gear shift - what's it's purpose - we don't know!


Owner's Manual says "You can select this mode to drive with some characteristics of a manual transmission. With the HOLD mode turned on, the automatic transmission will stay in a specific gear range.

Press the HOLD button on the shift lever to turn on the HOLD mode.

While on, the HOLD indicator light on the instrument panel will light up..."

The button is on the console, next to the shift lever, and the HOLD indicator light is in the lower left hand corner of the instrument panel

Oct 12, 2008 | 2007 Suzuki Forenza Sedan

Not finding what you are looking for?
2007 Mercedes-Benz C230 Sedan Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...