Question about 1995 Toyota Corolla

1 Answer

1995 Corolla 1.8L wireing question

I was looking for someone with the same model as mine that might be able to look under the hood and answer a question. A while back some @#^&(! stole the entire distributer assembly and a bunch of other stuff from under the hood of my 95 carolla W/ 1.8 L engine. In the process they cut off the plug that conects the distributor to the engine wireing harness. Unfortunatly some of the wires change colour at this junction. If I could trouble you to look at this junction and let me know which color on engine wireing goes to what color on distributer it would be most helpfull. I am assuming that the two white wires go togeather and the also the two black w/ orange stripe. My problem is the green and the black on distributor, and the thin black wire and the slightly larger black wire with red bands on the engine harness. Thank you in advance for your Help Aloha Stan Cole Kaneohe Hawaii

Posted by on

  • CaptStan Sep 29, 2008

    Thanks I have already wasted a whole day searching for the elusive matching junker. Seems our bigist junkyard recently closed down and the other just sent most of its cars off to the recyceler. If I had found one my question would be answered.

    Aloha Stan Cole Kaneohe Hawaii

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 89 Answers

THOSE BASTARDS!!!
I would take the plug+10cm wire from another "junker" and measure before soldering it on!
Because a lot of Toyotas assemb.workers seem to be colorblind...;)
Expensive Personal Experiences!
(I allways use something called ShrinkFlex? to insolate but its the danish name!)

Posted on Sep 29, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it possible that 1995 toyota corolla doesn't have EGR valve?


1995 Toyota Corolla 1.8L EFI DOHC 4cyl

The EGR Valve is located: Under hood, center, upper engine area, mounted on upper rear of engine near valve cover.Here's a link to what it look's like. EGR Valve at AutoZone com Best EGR Valve Products for Cars Trucks SUVS

Feb 14, 2016 | 1995 Toyota Corolla

1 Answer

Where is the flasher relay


most of the time it is under the dash

Mar 04, 2015 | 1995 Geo Prizm

1 Answer

Where is fuel pump relay on 1997 corolla?


There are a couple electrical boxes under the hood on the drivers side.
It's in one of those boxes.
Look on top of or under the box for a diagram indicating which one is the fuel pump relay.

Oct 17, 2013 | 1995 Toyota Corolla

1 Answer

Im looking for a 1993 toyota corolla free manuel to download. where can i get one?


check your owners manual. should tell you. the manual youd get from someone might not be the same for your car as they have different options so you could get one for a 6 cyl while you have a 4, or vice versa. also i just posted on a different version of your question of how to check this by looking at spark plug wires under the hood.

Oct 26, 2012 | 1993 Toyota Corolla

3 Answers

Need to know were gas filter is thanks bill riley


For 1995 Toyota Corolla 1.8L EFI DOHC 4cyl the Fuel Filter is located under hood, driver side, rear engine area, passenger side of master cylinder, mounted in fuel line.

Good luck.

Mar 22, 2010 | 1995 Toyota Corolla

1 Answer

I need the schematics for the belts on my 1995


Look under the hood. Somewhere is a belt drive diagram. If you cannot find the belt routing sticker then you might just have to go to the parts store and have them order the manual for you specific car.

Aug 01, 2009 | 1995 Toyota Corolla

1 Answer

Wiring schematic for plymouth grand voyager 1995


Is there green corosion on the tip of the wire ? Chances are the answer is yes. You will have to detach the fuse panel/box and run a new wire and connector to the fuse panel. Splice into the wire you can see, but make sur you cut enough of the wire off to get rid of the corrosion.Hope this helps.

Jul 30, 2009 | 1995 Plymouth Voyager

1 Answer

My hood is stuck


the release lever is just to the right of center.
you have to push the hood down slightly to release the pressure or it will not open.you need to make a hook out of a nail thick piece of wire to get under the latch and push it up at the same time you put some downward pressure on the hood.a bent screwdriver will work fine as a pry tool as well

May 23, 2009 | 1995 Toyota Corolla

2 Answers

Starting problems


have them check the crankshaft sensor they go bad sometimes and they are when tells the engine to start

Jun 28, 2008 | 1995 Chrysler Concorde

Not finding what you are looking for?
1995 Toyota Corolla Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...