Question about 1997 Nissan Pickup

2 Answers

Nissan pickup 1994

I need to replace a pcv valve. The engine is ka24e.
1) I do not know where it is exactly.
2) How many parts must be removed before I can remove this pcv valve?
3) Do you have any detail picture of the engine with the location of pcv?

Posted by on

  • Anonymous Jan 06, 2009

    where is the pcv valve in a 93 nissan pickup



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The pcv valve is behind the alternator between the alternator and oil filter. when you remove the oil filter you can see the pcv in the intake manifold. best way to get to it is through the pass side fender under the rubber mud flap thats between the wheel and engine.

Posted on Jun 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

The pcv valve is a one piece part(positive crankcase ventilation) its located on the valve covers and has a hose attached to it that goes to the air intake hose of the air breather. this is a simple installation. the pcv valve just slips into a grommet in the valve cover and can be pulled out and pushed back in with out any tools. please rate this... thanks

Posted on Sep 28, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace the pcv valve on a 1987 nissan pickup?

Here's a link to replacing your pvc valve. Repair Guides Routine Maintenance Pcv Valve AutoZone com After you remove it,shake it,if it rattles then it's good.

Mar 24, 2015 | 1987 Nissan Pickup

2 Answers

I have a 1994 nissan 2.4L pickup.I am currently in the process of changing the timing chain,cam gear and crank gear. In this process I noticed that the keyway on the crank gear is not in the up posit

Same happened to me. Economic way to ensure its at tdc is to remove #1 plug, using a thin dowel rod mark the distance it travels inside spark plug hole. Turn crankshaft slightly until you can measure the #1 piston is at its highest position. You'll be at tdc.

Jan 29, 2015 | 1994 Nissan Pickup

1 Answer

1997 Nissan pickup 2.4 head torque sequence

From repair manual for 1996 KA24E 2.4L engine:

Number bolts as follows:
Exhaust side, front to rear - 8, 6, 1, 3, 9
Intake side, front to rear - 10, 4, 2, 5, 7

Tighten bolts in numbered sequence, five steps.
Step 1 - 22 ft-lbs
Step 2 - 58 ft-lbs
Step 3 - loosen all bolts completely
Step 4 - 22 ft-lbs
Step 5 - 54-61 ft-lbs

Oct 19, 2014 | 1997 Nissan Pickup

1 Answer

How do I replace the pcv ? i have done my own tune-up,but never changed this myself,so I don't know where it goes

PCV are generally located on one of the 2 valve covers if you have the replacement part look for it on the valve covers.

Mar 20, 2011 | 1995 Nissan Pickup

1 Answer

Where is the Pvc valve on a 1997 nissan xe pickup?

1997 Nissan pickup its just above the oil filter, lower right of engine, access through right front wheelwell after removing wheel, it's a screw to be removed. -------------------- The pcv valve on the 2.4 l engine is located behind the alternator and the engine oil filter. The best way to change it is to go thru the wheel well. Take off the passenger front wheel, lift or remove the rubber splash curtain, remove the oil filter, disconnect the rubber vacuum hose, then use a 19 mm wrench to remove the pcv valve. ----------

Thanks. keep updated for any more can rate this solution and show your appreciation.

Sep 22, 2010 | 1997 Nissan Pickup

1 Answer

Where is the pcv valve located on a 1994 nissan pickup?

the pcv valve is located behind the alternator and filter ... here is some good instruction on how to change it

Jul 05, 2010 | 1994 Nissan Pickup

2 Answers

Where is pcv vavle located on 1983 nissan pickup 2.4l engine?

PCV valve is located on the valve cover or on the oil breather line, you shouldn't be able to miss it.I hope I could help!!!

Dec 24, 2009 | 1983 Nissan Pickup

2 Answers

I cannot locate pcv valve

actually its a pain to find mine was located directly under the power steering pump im assuming this is a ka24e.

Oct 02, 2009 | 1997 Nissan Pickup

2 Answers

Pcv valve replacement

If you are asking where it is. It is located directly behind the oil filter. You will have to remove your oil filter.

Aug 08, 2009 | 1997 Nissan Pickup

3 Answers

Where is pcv valve on 96 nissan pickup

The PCV valve on the KA24E 4-cylinder is located in front of the oil filter and above the alternator. It points to the rear of the engine.

You will need only two tools; a stubby 19mm open end wrench and a pair of pliers to remove the hose clamp. I did it without removing anything else. Just reach around to the right of the oil filter. It took about 15 minutes. Here is a pic:

Sep 09, 2008 | 1997 Nissan Pickup

Not finding what you are looking for?
1997 Nissan Pickup Logo

796 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

77169 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides