Question about 2001 Chevrolet Silverado 1500

1 Answer

2001 Chevy Silverado

Driver side mirror, How do you remove the mirror; To fix the inside attachments.Glenn hot-wing8@yahoo.com

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Moter runs real fast,and only goes 10 mph

Posted on Apr 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am replacing driver side mirror on 92 chevy corsica and having trouble emove the three deep well bolts .. what tool do i need to get them off


Chyanne, usually a socket wrench with correct size socket and extension will remove mirror screws. Check the attached video links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Side Rear View Mirror Chevy Lumina 90 94 1AAuto com

How To Install Replace Manual Side Rear View Mirror Chevy Cavalier 95 05...

Apr 09, 2016 | Cars & Trucks

1 Answer

1999 chevy silver ado passenger side power window wont go up it does have power


Remove the two armrest screws,slide the armrest towards the back of the door to remove.Remove the "triangle" cover that covers the standard mirror attachment screws.Use a small screwdriver to pop the clips on the window switch,and unplug it.I believe the rest of the panel is just secured with clips(I replaced the inside driver door handle on my work truck with my own home made steel replacement handle recently,but it has manual windows)

Jan 02, 2012 | 1999 Chevrolet Silverado 1500

1 Answer

Replace drivers side mirror 2001 chevy tahoe,mirror only


To just replace the mirror glass there are a few different styles, but they all pull off. I suggest you wear gloves and glasses. Get a grip behing the glass and pull out. You should see a round circular bracket in the center. The new mirror just snaps into the bracket. Center new mirror and push evenly in the center of glass until it snaps into place. Dont push in by holding the edges, you'll break it. If you don't see the circle or it comes off with the glass it was too damaged for just glass. Power or manual mirros differ inside, but the mirror replacement is the same. If you mean the entire mirror only, remove door panel. Lower window, remove electrical connector if power, remove 3 bolts attaching mirror to door. Remove.

Jan 27, 2011 | 2001 Chevrolet Tahoe

1 Answer

1994 chevy silverado driver side mirror is loose


try removing the black cover that wraps out from the door to the mirror just be carefull.....plastic ****.

Apr 25, 2010 | Chevrolet Silverado Cars & Trucks

1 Answer

How do you fix a side mirror on a 2001 Chevy Silverado. The mirror housing just flops around and the ''break away'' part seems to be broken.


These are kind of a pain but do-able with a 1/4" drive socket set
Remove the interior trim piece that covers the area Not the whole door panel - it will pop off with a flat blade screw driver
Remove the black foam insert
Now you can see the 3 nuts that hold the mirror to the door
Careful if you drop them you will say bad words
reinstall the same way - Slow and careful

Mar 08, 2010 | 2001 Chevrolet Silverado 1500

1 Answer

How do i fix loose drive side side mirror on a 1990 Chevy silverado 1500?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 29, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

I bought towing mirrors for 2008 silverado ltz but no instructions were supplied. How do I get to the wiring connections?


make your life easier. If your towing is not constant then save yourself the trouble and expense of permanently attaching large towing mirrors on your truck. Get the ones that temporarily attach to the existing mirrors and remove them when not in use. My silverado is already wide enough and a pain to park sometimes without any extra width added by side mirrors. Try stylintrucks.com for good selection.

May 10, 2009 | 2008 Chevrolet Silverado 2500HD 2WD

1 Answer

99 explorer drivers side mirror vibrates


are you trting to tighten the mirror glass or the mirror where it attaches to the body? I don't think glass is removable in 99. Only can try to press on glass to seat if unseated. not too hard.

  1. Remove the front door trim panel; refer to Section 501-05 .
  2. go to car-part.com for a used mirror. Page with * is cheapest seller.
  1. Remove the speaker.
    1. Remove the screws.
    1. Disconnect the electrical connector.
    1. Remove the speaker.
  1. Remove the outside rear view mirror (17682).
    1. Disconnect the power mirror wiring clips.
    1. Remove the outside rear view mirror nuts.
    1. Remove the outside rear view mirror.
      • Feed the power mirror wiring through the opening in the front door (20124).
------------------------------------------------------
f9d70e9.gif
----------------------------
SECTION 501-09: Rear View Mirrors 2001 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION Exterior Mirror Glass, 2001 model Removal
NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.
NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar.
All mirrors
  1. Position the glass in the full up position.
  1. Locate the notch at the bottom of the exterior mirror glass.
  1. Release the exterior mirror glass.
    1. Insert a long flat-bladed screwdriver in the notch.
    1. Push the screwdriver into the notch until the glass is released.
Heated mirrors
  1. Position aside the exterior mirror glass.
  1. Disconnect the electrical connectors.
All mirrors
  1. Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation
Heated mirrors
  1. Connect the electrical connectors.
All mirrors
  1. Position the exterior mirror glass on the exterior mirror motor.
  1. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.
4d9527f.gif

Apr 12, 2009 | 1999 Ford Explorer

2 Answers

2001 camry replacing driver side mirror


Pull off the triangular trim panel that is right behind the mirror. It is held on by 2 clips. This will allow you to see all three 10 mm bolts to remove the mirror.

Mar 22, 2009 | 2001 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...