Question about 1986 Nissan King Cab

1 Answer

1986 king cab

My husband has a 1986 nissan king cab with a z24i motor and was driving home from work and it started running badly and acted like it had no power going up hills we can't figure out what is wrong it was running fine and just started acting up all the sudden

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

I've had similiar issues with a different vehicle. I had to purchase new plugs, rotor, and distributor/spark plug wires. I was running on three cylinders verses four. I did not notice until I was going up hills, where it required more power. If you have a tachometer, keep an eye on it. If it is running slower than it should that could be an indication that there is a problem with the wiring. (probably should be doing about 2500 rpm)

I had a Hyundai that did just the opposite. It would peg the tach to 3,000 rpm well before it was time to shift. Ended up being an ignition coil went bad, which takes the place of the distributer. I replaced the ignition coil and now the engine doesn't have to run as high.

Posted on Sep 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can make a Nissan z24 engine give bad noice and how can it fix


1986 Nissan 720 King Cab with 2.4 Naps Z engine (Carb ...

community.ratsun.net > Technical > Engine

Jul 1, 2009 - 14 posts - ‎5 authors
1986 Nissan 720 King Cab with 2.4 Naps Z engine (Carb based) ... Just yesterday it made a real weird loud panging noise (Kind of ... If you dont surface the head it will usually form better to the bad block deck giving you as much as another 100k !!!!!!!! before it ... Also the z24 HATES head gasket coating.

Idle problem? - Engine - Ratsun Forums - Ratsun.net

community.ratsun.net > Technical > Engine

Nov 17, 2009 - 14 posts - ‎6 authors
I am new to this forum along with Datsun/Nissan trucks. ... doing a lot of reading and trying to become more familiar with the Nissan 720 /z24 engine. ... also if the mixture is out of adjustment it can cause the same symtoms also.the ... Listen near the back of the carb and you should hear a light clicking sound.

nissan hardbody engine rattle - YouTube



Dec 03, 2015 | Nissan Cars & Trucks

1 Answer

Turns over but wont start if I roll it off it will start


Your starter is bad...by push starting the truck you are forcing the motor to turn over therefor bypassing the starter.

Sep 03, 2011 | 1986 Nissan King Cab

1 Answer

1986 Nissan King Cab pick up. Runs good when giving gas, but cuts off at an idol. Have replaced Altenator.


Based on the information provided, it sounds like a bad TPS (Throttle Position Sensor). The TPS controls your idling speed under all conditions. When a TPS goes bad, you will usually notice the vehicle will idle when the engine is cold but once warm or with the AC on, it will sputter or stall.

Jul 18, 2011 | 1986 Nissan King Cab

1 Answer

What years can i use for a 1986 nissan king cab windshield


According to the interchange list I have, 1986 to 1997 are interchangeable.

May 15, 2011 | 1986 Nissan King Cab

1 Answer

1986 nissan d21 4wd with z24 motor it is not getting any fire.the distirb.is working the injector


i am not sure if it has eight plugs or not but if it has two coils , check coils if they seem okay check the modulators thats hookrd to the back of the coil (coils). I have a 1986 nissan hardbody 4x4 w/z24i engine. Check back with me i might be a little help due to i have had resent problems under the hood of mine and maybe have a part or two you can get.

Apr 07, 2011 | 1986 Nissan Pickup 4WD 1986

1 Answer

1986 nissan pickup z24i. will run when spray start fluid but wont stay running. just installed the engine


Did you hook all the lines for the fuel pump up when the engine was re-installed? It is definitely a fuel issue. Disconnect the fuel line and crank over the engine to check for fuel supply.

Mar 24, 2011 | 1986 Nissan Pickup 4WD 1986

2 Answers

Head bolt settings


1st - step; - 22 ft./lbs. 2nd - step; - 58 ft./lbs. 3rd - step, loosen all bolts completely; 4th - step; - 22 ft./lbs. 5th - step; - 54 ft./lbs.fig074.png

Jun 04, 2009 | 1986 Nissan King Cab

Not finding what you are looking for?
Cars & Trucks Logo

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...