Question about 2001 Volkswagen Cabrio

1 Answer

How to change a burned head light on a 2000 vw cabrio?

Need to know how to replace a burnt headlight on my 2000 vw cabrio

Posted by on

  • Anonymous Mar 23, 2014

    Guage lights stay on but back lighting goes out

×

1 Answer

Changing headlights on VW Cabrio I just changed the headlights on my roommate's 2002 Cabrio, but I followed the instructions given for a 2001. What you have to do is: 1. Move the metal wire holding the black cover to the side and remove the black cover. 2. Remove the power cord from the bulb itself and push to the side. 3. You will see a pin holding the headlight in. Squeeze the pin (you want to squeeze closer to the top of the pin, which is the closed end; don't squeeze the open ends because all you will do is get irritated and hurt your fingers), then push it back and down. What this will do is move the pin away and then out from those little metal tabs that its going through. One side will pop out, then the other. When you get it out, the pin should be standing up, with the closed end pointing up. You can then remove the bulb and replace. Popping the pin back in is a heck of a lot easier than getting it out! I was able to remove the cover, but I got totally stumped on the pin. I hope this helps you out, it may be a little confusing but its kind of difficult to describe. Maybe this will at least point you in the right direction!

Posted on Oct 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Mazda 5 minivan how do I change the headlight bulb


Headlight Change 2006-2010 Mazda 5 - CarCareKiosk

www.carcarekiosk.com/video/2009_Mazda_5_Sport_2.../headlight
This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...

Low beam head light bulb replace 2000-2006 Mazda Mpv ...

? 5:11
https://www.youtube.com/watch?v=kblzMLRJrok
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...

Nov 29, 2015 | Mazda Cars & Trucks

1 Answer

Will a 1999 model vw cabrio headlights fit a 2000 model?


YES WITH SOME MINOR MODIFICATIONS.BEWARE!!!!!I NEED VIN TO CHECK PART NUMBERS FIRST!!

Mar 06, 2014 | 2000 Volkswagen Cabrio

1 Answer

Which fuse should i change for my headlights ?


Look at your fuse panel board either under the dash board on drivers side or possibly under the hood depending on vehicle. It will tell u which fuse is for the headlights.

Or from the sounds of it... Possible head light bulb burnt out and not a fuse. A headlight fuse should not be popping or burning out. I would suggest looking at the filament on the bulb to see if intact. Replace broken head light bulb with working other working headlight to eliminate one possibility. If it works buy a new bulb. If it doesn't look at fuse panel.

Jun 05, 2013 | Cars & Trucks

1 Answer

How do I remove the tail light fixture to replace a burnt out bulb on my 2002 VW cabrio


Open the back latch, look at the taillight housing you will either see regular phelps heads or York heads. Can you send me a picture.

Mar 03, 2013 | 2002 Volkswagen Cabrio

1 Answer

Low or high beams do not work on drivers side nissan 2000 maxima


Check the headlight plug first, see if you have 12 volts and a ground when the head light is turned on. You may just have a burned headlight connector.

Oct 14, 2012 | 2000 Nissan Maxima

1 Answer

How to replace headlight bulb on passenger side


On your 4x4 need to remove head lamp assembly to change the burnt bulb.There is no need of special tools but I recommend the job to be done by VW electrician.

Jun 28, 2011 | 2004 Volkswagen Touareg

2 Answers

The bulb in my left headlight is burned out. How do I change it?


FIRST OF ALL YOU HAVE HALOGEN BULBS YOU NEED TO WEAR CLEAN DRY GLOVES ON HANDS WHEN HANDLING HALOGEN BULBS.OIL FROM HANDS WILL CAUSE THEM TO BURN OUT.OKAY TO REPLACE HEAD LIGHT BULB.OPEN HOOD AND PULL UP THE RELEASE LEVER AT THE BACK OF THE HEADLIGHT HOUSING.THE HEADLIGHT HOUSING SLIDES IN AND OUT OF THE BODY IN TRACKS.PULL THE HEADLIGHT HOUSING FAR ENOUGH FORWARD TO DISCONNECT THE ELECTRICAL CONNECTORS THEN SLIDE THE HEADLIGHT HOUSING AT THE WAY OUT.TO INSTALL THE HOUSING SLIDE IT BACK IN ALIGNING THE RIDGES ON EACH SIDE WITH THE TWO TRACKS IN THE BODY.WHEN THE HOUSING IS IN FAR ENOUGH REACH THROUGH FROM THE INSIDE THE ENGINE COMPARTMENT TO REATTACH THE ELECTRICAL CONNECTORS.

Aug 19, 2010 | 2000 Volkswagen Beetle

1 Answer

My 2000 VW Cabrio tempature light is flashing. I


you will probably need to replace the tempurature sensor it's self the car is not actually getting hot.

Oct 02, 2009 | 2000 Volkswagen Cabrio

Not finding what you are looking for?
2001 Volkswagen Cabrio Logo

418 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...