Question about 1995 Jeep Wrangler

1 Answer

Crank position sensor

How do you install it?

Posted by on

  • wspdeck Sep 28, 2008

    My mistake.  It's a 94 Wrangler 4.0, and the part is the Cam Position Sensor.  Isn't it part of the distributor?  Thanks for your help,  Bill

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

You didnt say what engine 2.5 or 4.0
here is where the 4.0 sensor is. Under hood, center, upper engine area, mounted between intake manifold and valve cover crank position sensor - clearpixel.gifunbolt twist to break loose then pull . and lube the new one with just a little grease before instulation.
good luck
paul

Posted on Sep 28, 2008

  • paul erickson
    paul erickson Sep 28, 2008

    1994 doesnt have a cam position sensor just the dist pickup..





×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is crank shaft sensor location on 95 lexus sc300 please help


images for Where is crankshaft sensor location on 95 ...

eplaced engine on '97 SC300 now new engine does not have Crank ...

www.clublexus.com/.../633233-replaced-engine-on-97-sc300-now-new-...
May 4, 2012 - Location: arizona. Posts: 3 ... apparently 95-97s had an additional crank sensor. .... 1995 Lexus SC300 5spd Na-T ( TT Ecu Mod + a few others) 2jzge position sensor??
Nov 2, 2011
SC400 Crank Shaft Position Sensor. WHERE?????
Oct 11, 2011
SC300 No Spark
Oct 2, 2010
What happens if the Camshaft Position Sensor goes bad?
Jun 18, 2009
More results from www.clublexus.com

Lexus Crank Position Sensor ' LS400 SC300 ES300 GS300 ...

www.partsgeek.com > Crank Position Sensor > Lexus Parts & Accessories
Products 1 - 10 of 68 - 95 1995 Lexus LS400 Crank Position Sensor Denso NLA 7/13 ... 96 1996 Lexus SC300 Crank Position Sensor Denso Includes Pigtail.

Jan 27, 2016 | Lexus Cars & Trucks

1 Answer

Where is the crank sensor located on a 06 toyota highlander


images for Where is the crank sensor located on a 06 .

How To Install Replace Crankshaft Position Sensor Toyota ...

? 6:58
https://www.youtube.com/watch?v=M6zU6jh8pNc
Jan 24, 2011 - Uploaded by 1A Auto Parts
How To Install Replace Crankshaft Position Sensor ToyotaCamry 3.0L V6 1AAuto.com ... the crankshaft position sensoron a 1994 Toyota Camry 3.0L V6. ..... 2002-2006 LEXUS ES300 ES330 TOYOTA CAMRY KNOCK ...

Dec 05, 2015 | Toyota Cars & Trucks

2 Answers

99 stratus 2.5 v-6/no spark.will crank over.


CRANKSHAFT POSITION SENSOR - 2.5L

REMOVAL
  1. Remove speed control servo from driver's side strut tower.
  2. Remove crankshaft position sensor retaining bolt Crankshaft Position Sensor
  3. Pull crankshaft position sensor straight up out of the transaxle housing.
  4. (Disconnect crankshaft position sensor electrical connector from the wiring harness connector.
INSTALLATION - ADJUSTABLE All vehicles will be equipped with an adjustable crankshaft position sensor. This can be identified by an elongated mounting hole in the sensor.
NOTE: If the removed sensor is to be reinstalled, clean off the old spacer on the sensor face. A NEW SPACER must be attached to the sensor face before installation. If the sensor is being replaced, confirm that the paper spacer is attached to the face of the new sensor Crankshaft Position Sensor and Spacer
  1. Install sensor in transaxle and push sensor down until contact is made with the drive plate. While holding the sensor in this position, install and tighten the retaining bolt to 12 N·m (105 in. lbs.) torque.
  2. Connect crankshaft position sensor electrical connector to the wiring harness connector.
  3. Attach connector to heater tube bracket.
  4. Install speed control servo. Tighten nuts to 9 N·m (80 in. lbs.) torque.

May 19, 2012 | 1999 Dodge Stratus

2 Answers

HOW DO YOU INSTALL A CRANK POSITION SENSOR 1999 CHEVY ASTRO VAN 4.3 LTR MOTOR


The crank sensor is inside the distributor and may also be called an HEI pickup.
Disconnect wiring harness and remove the two tork head screws and lift out. Now would be a good time to replace the rotor & distributor cap if you haven't done so lately.
I hope this helps.

Jul 07, 2011 | 1999 Chevrolet Astro

1 Answer

How do i install a crank angle sensor on my ford 1997E250 4.2L V6


FREE FROM ME TO YOU!!! I HOPE THIS HELPS YOU!! Sensor, Crankshaft Position (CKP) Removal
  1. Raise and support the vehicle.
  1. Remove crankshaft position sensor (CKP sensor) (6C315).
    1. Disconnect the CKP sensor electrical connector.
    1. Remove the (A) CKP sensor shield nuts and the (B) CKP sensor shield.
    1. Remove the (C) CKP sensor bolts and the (D) CKP sensor.

fc50791.gif Installation
  1. Install crankshaft position sensor.
    1. Position the CKP sensor.
    1. Install the bolts.
    1. Position the shield.
    1. Install the shield nuts.
    1. Connect the electrical connector.

cad91ff.gif

Mar 25, 2010 | 2002 Ford E250

2 Answers

Where is crank sensor located


v6 's is by the frot crank shaft area & 4 cyl engines are on the blocks mid way lower area near the oil pan

Jan 14, 2010 | 1998 Toyota Avalon

2 Answers

Need help finding camshaft position sensor


2.0L 2.4L Removal The camshaft position sensor is mounted to the rear of the cylinder head.

Remove the negative battery cable. Disconnect the PCV hose and reposition Disconnect electrical connectors from the camshaft position sensor. Remove camshaft position sensor mounting screws. Remove sensor.Loosen screw attaching target magnet to rear of camshaft and remove magnet.
Instalation The target magnet has locating dowels that fit into machined locating holes in the end of the camshaft.
- Install target magnet in end of camshaft. Tighten mounting screw to 3 Nm (30 in. lbs.) torque. Over torqueing could cause cracks in magnet. If magnet cracks replace it.
- Install camshaft position sensor. Tighten sensor mounting screws to 12.9 Nm (115 in. lbs.) torque.
- Carefully attach electrical connector to camshaft position sensor. Installation at an angle may damage the sensor pins. - Connect the PCV Valve hose. - Connect the negative battery cable.
2.7L V6 Removal
The camshaft position sensor is mounted in the front of the head.

Disconnect electrical connector from sensor. Remove camshaft position sensor screw.
CAM Sensor Location 2.7L
Without pulling on the connector, pull the sensor out of the chain case cover.

Installation - Install sensor in the chain case cover and push sensor in until contact is made with the boss on the head. While holding the sensor in this position,install and tighten the retaining bolt to 12 Nm (105 in. lbs.) torque.
- Attach electrical connector to sensor.

Good luck and hope this helps





May 02, 2009 | Dodge Stratus Cars & Trucks

1 Answer

Crank sensor


CRANKSHAFT POSITION SENSOR - 3.9 - 5.2 - 5.9L ENGINES
REMOVAL

The sensor is bolted to the top of the cylinder block near the rear of right cylinder head

Note: The sensor is accessed by removing the right front fender liner

Remove right front tire and right front wheelhouse liner.
Disconnect crankshaft position sensor pigtail harness from main wiring harness.
Remove two sensor (recessed hex head) mounting bolts on the Crankshaft Position Sensor
Remove sensor from engine.

INSTALLATION
Position crankshaft position sensor to engine.
Install mounting bolts and tighten to 8 N·m (70 in. lbs.) torque.
Connect main harness electrical connector to sensor.
Install right front tire and right front wheelhouse liner.

Feb 07, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21987 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...