Question about 2005 Dodge Ram

1 Answer

2005 dodge diesel codes!

Engine light is on, the truck keeps downshifting! 2 codes come up (P0340 And P0341)... PLEAS HELP!

Posted by on

  • 1 more comment 
  • Geeeena Mar 18, 2009

    I have this same problem! My truck intermittently lugs, smokes and sometimes just dies and is hard to start. I got those same codes. Any other help?

  • Anonymous Mar 22, 2014

    I had a P0341 code on my ram 2006 3500 diesel so I ghanged the cam position sensor and still have a P0341 code

  • Anonymous Mar 25, 2014

    check light comes on truck duggs down then light goes
    off truck runs great.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

Hi..
the Code P0340, Camshaft Position sensor problem or Loss signal.
The Code P0341, Camshaft Position sensor Intermitent Signal.

The First step you should do is : Locate the Camsahaft sensor,
Is located On Right Front of the Engine..
It use a 3 wires Connector.
1-- Pink/Yellow
2-- Brown/Orange
3-- Dark blue/Gray.

After you found it. Inspect the Connector. If is The connector in good condition.
Replace the Camshaft Position sensor...

Ok... I hope this help on your problem..
Thank you for use Fixya...

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine codes p0340


P0340 Dodge - Camshaft Position Sensor Circuit Bank 1 Sensor 1 P0340 Dodge Camshaft Position Sensor Circuit Bank 1 Sensor 1

Aug 19, 2014 | 2000 Dodge Durango

1 Answer

I have 2 engine codes on my 2005 dodge neon. they are p0325 and p0340. the car has problem starting and misses badly for a while. What is the problem and how do i fix it? thanx for the help!


the p0325 code pertains to a knock censor. the p0340 is for your cam shaft sensor. i've had this problem before. try replacing the cam shaft censor first and run the codes again to see if the other still comes up. it should fix the problem. hope this helps

Jun 24, 2014 | 2005 Dodge Neon SXT

1 Answer

I have a po340 a po341 an a po016 code on a 2006 dodge caravan want start


Hi !
P0340 = This indicates that a problem was detected in the camshaft position sensor circuit.
P0341 = Camshaft Position Sensor Circuit Range/Performance
P0016 = Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)

The common point of these errors is the camshaft sensor, so I'm afraid you need to visit a service.

Apr 24, 2014 | Cars & Trucks

1 Answer

Tcs light flashes and p0340 code


P0340 code means "Something" is wrong in the timing...
from CMP (Camshaft Position sensor) to the crankshaft bolt.

Very first thing, verify connectors are clean and shiny.
clear all codes, even hard codes.

57f2e883-ce32-4061-b04b-ae0890f2c653.gif
612c4a6c-208f-43b8-8645-8318e85f9e48.gif
9e0c3051-1208-49b3-95d5-de3ff545fd3a.gif

Nov 23, 2013 | 2005 Mazda 6

1 Answer

2005 Dodge Caravan. During drive through car wash engine light came on. Getting error codes p0325 p0344 p0340 p0522. Engine hesitates, can't press gas pedal too quickly or feels like stall/no power. Codes...


most car washes have a under carrage wash now days.
I bet my money those sensors are exposed to the jet spray from the under carrage spray and causing water to get into the connectors,happens to me all the time but affects my coil system and the engine picks up a missfire,Gary

Oct 26, 2013 | 2005 Dodge Caravan

1 Answer

I have the code p0340 for slip n tcs is telling me is a sensor but it show2


I am not sure what "slip n tcs" means but on the 2005 nissan maxima the code P0340 is for the camshaft position sensor circit on bank 1, which is in the rear of the engine compartment. Code P0345 is for camshaft position on bank 2, which is in the front of the engine compartment. The images show the Cyl banks and a cam sensor.6_29_2012_3_38_07_am.gif6_29_2012_3_40_48_am.gif

Jun 29, 2012 | 2005 Nissan Maxima

3 Answers

Check Engine Light, Code p0340, triggered by other accessories?


its probably just grounded wires.. check your car's wiring.. if you can't do that yourself. Have an electrician/mechanic check it for you..

Jul 02, 2009 | 2000 Dodge Intrepid

1 Answer

Check engine light on 2001 Ram 3500 5.9l diesel


need To know the codes and a reason why they did not replace the fuel pump and only the lift pump

Jan 16, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Check engine light on


you need to use a scanner. disconnecting the bat ground will work on most codes. it's safer to use scanner

Dec 18, 2008 | 2005 Dodge Ram 3500

Not finding what you are looking for?
2005 Dodge Ram Logo

1,154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...