Question about 2000 GMC Jimmy
My driver's side power window switch doesn't work. All the other window switches work fine.The switch was not acting up at all, it worked great in the morning and that night when I was going home I went to use the switch and nothing happened. If I hold down the switch I can hear a clicking sound in the switch,Can I change just the driver's switch or is it one complete unit? Driver's side window will not work. All other windows work. I changed the switch but the problem persisted with the new switch.
The same thing happened to my 1999 JMC Jimmy recently. I believe the problem is that your power window motor has most likely gone out or is starting to go out. The motor will need replaced. They are pretty expensive new. I went to a junkyard and got one for around 15 dollars. When mine went bad, I had rolled my window down about three or four inches and it stuck there. I took my door panel off and tapped on the motor while holding up on the window switch and got it to go up after a few minutes. I am replacing my motor today, I'll leave an update here about the outcome when I finish the job. I hope this information helps you.
Posted on Oct 11, 2008
Passenger side ele. window will not work from it's switch...works from driver side ..replaced passenger side switch still won' t work. what next
Posted on Sep 22, 2011
The cable is probably is bound up in the motor..this happens alot.put your ear down by the window motor and listen to see if motor trying to turn.
Posted on Apr 08, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem...it was the window gear that got stuck when the window was all the way up. (that's the clicking) I took my panel off and banged on the inside of the door with a rubber mallet. The window works again. Since then I make sure when I role the window all the way up to stop that I just barely tap the down button to release the pressure on the gear inside. When your using the hammer...hold the switch in the down mode...ignition on of course.
Posted on Sep 06, 2008
SOURCE: 1997 GMC Jimmy 4x4 SLE
You may have a combination problem. Your system uses electrical/vacumn. The ducts are operated by vacumn being directed to different hoses by the electrical switch. If you can get to one of the hose with the engine running, pull one off of its ports and check for vacumn.
Posted on Nov 18, 2008
Tips for a great answer:
Apr 01, 2014 | 2000 GMC Jimmy
Mar 01, 2013 | 2000 GMC Jimmy
Mar 01, 2013 | 2000 GMC Jimmy
Sep 25, 2012 | 2000 GMC Jimmy
Apr 19, 2010 | 1996 GMC Jimmy
Sep 24, 2009 | 2000 GMC Jimmy
Jun 21, 2009 | 2000 GMC Jimmy
May 27, 2009 | 2000 GMC Jimmy
Aug 26, 2008 | 2001 GMC Jimmy
2,505 people viewed this question
Usually answered in minutes!