DRIVER SIDE WINDOW WONT GO UP OR DOWN

Recheck your wiring, sounds like wiring ins't right to me....Maybe a cut or pinched wire some where....There is a chance the window motors are bad also...I hope you find the problem, my 96 would not roll back up after going down turned out to be the motor on drivers side was bad...Good Luck....

you could have a bad power window switch for the drivers door or a bad electrical connection for the window. it could also be a bad power window motor for the down side control.

New switch for the passenger side. The drivers side switch may be wired through the passengers side switch witch will make it not work if the passengers side switch is bad. Just a thought. Hope this helps.

If the passenger side switch is bad it wont complete the circuit to operate the window. Recommend trying a known good passenger switch.

faulty driver window regulator. i promise.

Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

It sounds like everything else and the wiring is okay, only that button on the driver's switch is not working. I would try a new switch, if you see nothing wrong with the electrical plug for it when you take it off.
If that down wire was broken somewhere from the driver switch to the passenger door, I don't think the driver's switch would work for it either way, up or down. And same, neither would the passenger switch work. I think the button for down is not making contact somehow, and right in the switch.

is the switch on the drivers side in "lock out" where it wont let the other window operate from the right switch? if thats OK, then if the right side only lets the window down, but not up, and the driver can roll it up and down, the right switch must be bad.

PASSENGER MASTER SWITCH TURNED OFF ON DRIVERS DOOR WINDOW SWITCH PANEL?????

The first thing that I would do is check for electricty at the motors them sel and work your way back.If there is elec. at the window motor it's self susspect a motor problem.Remove the motor to see if it spins (but it dosen't me its good it could be week)next check for binding in the window mecanism.