Question about 1996 Volkswagen Cabrio

1 Answer

TIRE REMOVAL WITH LOCK NUTS?

HOW CAN I PUT NEW TIRES ON  WHEN I DO NOT HAVE THE KEY TO REMOVE THE LOCK NUTS.??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 89 Answers

Usually if i cant ORDER a new KEY...;)
Ill try to find a wrench TOP and "AIRGUN" it or VELD a nut on it if theres room!
Orig.BMW has order numbers stamped in the holecenter...real easy!

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot find locking wheel nut key to take alloy wheels off anyone know where i can get one chea . Thank you


Most tire shops will have a universal locking lug removal set. You might call on your local tire shop to see if they can assist you.

May 21, 2015 | Cars & Trucks

1 Answer

How do i change a tire on a 1988 ford f-150


Before doing anything make sure you have air in your spare..,A good Jack and spare tire removal kit....The kit should be under or behind the passenger seat..I don't like the factory Jack it comes with because sometimes you need a good strong block of wood to achieve the height you need to contact the vehicle..and sometimes they don't work correctly...Some spare tire release tools are under the hood..It is a long skinny rod ...You have to use rod or rod kit to stick through the rear bumper at the slot and turn the rod counterclockwise after you feel the rod connect with the release mechanism..,Lower the spare until it touches the ground then keep turning so you can have enough slack to remove cable from spare tire...Set parking brake while in park and use the lug nut removal tool to break loose the lug nuts before raising vehicle..They are removed counter clockwise..Don't take nuts off just break them loose...Block front wheels for safety with anything solid you can find if you are stranded..If you can't find anything rely on parking brake..It should be safe in park but safety first....Jack vehicle up..,remove all lug nuts put them in a safe clean place don't lose them..Remove flat tire..Install spare..Start each lug nut and tighten them all tight by hand..Snug each nut clockwise in a star pattern ..Get them good and tight but don't try to hurt yourself or break the stud...Lower vehicle,remove Jack..Snug each lug nut once again for safety..Put flat in truck bed for now rather than back in the spare storage area because it has to be repaired..Crank spare cable that held spare under truck clockwise until it stops.Remove tool..,Gather all tools used., remove blocks from front tires.,Head to a tire store...

Feb 21, 2015 | 1988 Ford F 150

1 Answer

1996 buick take off my front tires


remove wheel cover then with tire on the ground just loosen lug nuts just a little dont remove lug nuts then safely raise support vechicle.then remove front tires.

Apr 07, 2013 | 1991 Buick Century

1 Answer

Corvette sway bar installation


Stabilizer Bar: Service and Repair
Front
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
3. Remove the stabilizer shaft link nuts from the stabilizer shaft.
4. Remove the stabilizer shaft insulator clamps from the front crossmember.
5. Remove the stabilizer shaft from the vehicle.
Installation Procedure
1. Install the stabilizer shaft, insulator clamps and bolts to the crossmember.
2. Install the stabilizer shaft links to the stabilizer shaft.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the stabilizer shaft link nuts.
- Tighten the stabilizer shaft link nuts to 72 Nm (53 ft. lbs.).
4. Install the stabilizer shaft insulator clamp bolts.
- Tighten the stabilizer shaft insulator clamp bolts to 58 Nm (43 ft. lbs.).
5. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
6. Lower the vehicle.



Stabilizer Bar: Service and Repair
Rear
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
3. Remove the stabilizer shaft link nuts from the stabilizer shaft.
4. Remove the stabilizer shaft clamps, bolts and nuts retaining the shaft to the crossmember.
5. Remove the stabilizer shaft from the vehicle.
Installation Procedure
1. Install the stabilizer shaft to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the stabilizer shaft insulator clamps to the stabilizer shaft and the crossmember.
- Tighten the stabilizer shaft insulator clamp bolts to 65 Nm (49 ft. lbs.).
- Tighten the stabilizer shaft insulator clamp nuts to 95 Nm (70 ft. lbs.).
3. Install the stabilizer shaft links to the stabilizer shaft.
- Tighten the stabilizer shaft link nuts to 72 Nm (53 ft. lbs.).
4. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation.
5. Lower the vehicle.


Oct 30, 2009 | 2001 Chevrolet Corvette

1 Answer

Change spare tire removing spare tire


Put the car on a level ground, with the transmission in PARK. Lossen the nuts of the tire to change. Chuck back-tires if changing front, or chuck front-tires if changing back-tires. Jack up the car enough to raise the concerned tire off the ground. Remove nuts, and pull out the tire. Put in spare tire.
Hand tighten the nuts a considerable, but you might use the wrench to tighten a bit because this is a big/heavy car. Lower the car, and again tighten the nuts securely in a diagonal pattern with the wrench- two grunts used to be the rule of the thumb.

Oct 27, 2009 | 2001 Lexus LX 470

1 Answer

Rear tire lug bolts


You have to remove the tire/wheel assy. remove the brake drum, you will see the spindle with the bolts there. punch out the broken bolts install new buy pushing thru the hole.Find some regular nuts that will fit over the stud, put your new nuts on and tighten up till flush in back.

Jun 07, 2009 | 2003 Chevrolet Cavalier

1 Answer

Rear axle bearing replacement



REAR WHEEL BEARING/ HUB

Removal Procedure
  1. Raise the vehicle. Refer to Vehicle Lifting in General Diagnosis.
  2. Remove the wheel and the tire. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
    1. Remove and support the brake caliper. Refer to Brake Caliper Replacement (Front) or Brake Caliper Replacement (Rear) in Brakes.
    2. Remove the brake rotor. Refer to Brake Rotor Replacement in Disc Brakes.
    3. Remove the ABS sensor wire connector.
    4. Remove the four bolts from the control arm.
    5. Remove the hub and bearing from the control arm.
    6. Remove the brake shield from the control arm.
    7. Clean the control arm face and the bore before installing the hub and the bearing.
    Installation Procedure

    Notice: Refer to Fastener Notice in Service Precautions.
    1. Install the brake shield and the hub and the bearing to the control arm with the four bolts. Be careful not to drop the hub and the bearing, as it could be damaged. Reconnect the ABS sensor. Tighten the hub and bearing bolts to 70 Nm (52 ft. lbs.).
    2. Install the brake rotor. Refer to Brake Rotor Replacement in Disc Brakes.
    3. Install the brake caliper. Refer to Brake Caliper Replacement (Front) or Brake Caliper Replacement (Rear) in Disc Brakes.
    4. Install the wheel and the tire. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment. Tighten the wheel nuts to 140 Nm (100 ft. lbs.).
    5. Lower the vehicle.

Feb 14, 2009 | 2002 Pontiac Bonneville

2 Answers

How to change the tire


First off did you Know this ?????

Make / Models : Model/Build Years:
GMC / 1500 2004
Regency / Chevrolet 1500 2004
MANUFACTURER: General Motors Corp.
NHTSA CAMPAIGN ID Number : 04V240000 Recall Date : MAY 14, 2004
COMPONENT: Tires: Temporary/Emergency Spare Tire
Potential Number Of Units Affected : 285
SUMMARY:
The spare tire and wheel assembly that was provided on certain conversion vehicles will not fit on the front wheel hub due to offset of the wheel. However, it will fit on the rear wheels.
CONSEQUENCE:
If someone has a flat tire on the front wheel, they will not be able to install the provided spare tire.
REMEDY:
Dealers will install a spare wheel with the correct offset. Owner notification began on June 11, 2004. Owners should contact Regency at 1-800-989-4727.
NOTES:
Customers can also contact The National Highway Traffic Safety Administration's Auto Safety Hotline at 1-888-DASH-2-DOT (1-888-327-4236)

SPARE TIRE is Under rear of truck use Long Cranking in HoleClose to Lisence Plate to Lower it Down Cranking Counter Clockwise. Wing in center of Wheel pokes thrugh Hole in Center of wheel
Reverse Procedure to Put old tire in Tire Storage Compartment

  1. Locate Jack & Wheel Lug Nut Wrench
  2. There is Directions as to where to placse the Jack for raising Truck Where Jack is Located
  3. Set Park Brake Chalk tire if possible & Hazard lights (If on the Roadside)
  4. Loosen all Wheel Nuts on said wheel before Raising Vehicle
  5. Place Jack In Recomended Placment spot
  6. Rear is Normaly on Axel close to Shock
  7. Front is Normaly on FRAMERAIL
  8. Raise vehicle untill tire is 3-4 inches off ground as Flat will Lower vehicle
  9. Remove All Wheel Nuts And Wheel
  10. Place new wheel/tire on Vehicle and start all nuts
  11. Tighten nuts as tight as Possible then Lower Vehicle Untill tire touches ground Good
  12. Now Toque Wheel Nuts as tight as Possible with hand tool
  13. Lower vehicle all the way down
  14. Put away tools and Reliece Park Brake
  15. Torque should be around 100-130 foot Pounds

I Hope this is What You Wanted Its Off the Cuff as My Reference Books done have this Procedure.


Jan 26, 2009 | 2004 GMC Sierra

2 Answers

Wheel Lock Key


gm dealer should be able to order one by your vin number

Nov 14, 2008 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1996 Volkswagen Cabrio Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...