Question about 1979 Chevrolet C/K 3500

1 Answer

1979 chevy c 30

I am from a town called Ladysmith, South Africa.
I bought a 1979 chevy c 30 longweel base.
Engine still running smoothly!
Engine: inline 6 cylinder

I would like some spects on the engine, please
Where can i get a workshop manual.

Posted by on

  • yadayada
    yadayada May 11, 2010

    Have you tried eBay?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Look at http://www.classicparts.com/Literature/departments/335/, they have a lot of material

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

CYLINDER HEAD AND BIG END BEARINGS TORQUE SETTINGS FOR OPEL CORSA 2005 1.6LT PETROL MODEL SOUTH AFRICA


i think the 1.6 ltr was only for some markets the engine i think it may be is! cyl head head with new bolts, 25nm +90 +90 +90 + 45 degrees the big end/conrod bearings 25nm +30 degrees thats if it a vauxhall/general motors engine. it may not be

Sep 29, 2016 | 2005 Opel Corsa 1.6

3 Answers

I need to kno the cylender head torque specs for a 2.3i vw microbus five cylender


The Audi 5 cylinder engine (Engine code AFU) was mainly produced in South Africa and was called a Microbus. The engine capacity was 2309cc. The Microbus 2.3i T3 was produced from 1992-2002.

According to Mead & McGrouther - Data Digest the torque settings for the cylinder head bolts are as follows: 40Nm + 60Nm + 90'degree turn + 90' degree turn. The cylinder head bolts has to be replaced with brand new ones.

The Main Bearings: 65Nm. The Big Ends: 30Nm + 90 degree turn.

The OHC Bearing Caps: 20Nm.

Flywheel Bolts Manual transmission: 60Nm + 90 degree turn.

Jul 28, 2014 | Cars & Trucks

1 Answer

My ford f 150 with a 300 inline six is idling rough but with run, runs good at high rpm but is running rich


I have a 1967 Ford F1oo with the in-line 300 6 cylinder that's running rough what could possibly be the problem The gentleman that I bought the truck from said it would be a burnt valve

Oct 21, 2012 | Cars & Trucks

2 Answers

I bought a brand new Mazda Etude 180ise (2000 model). For the last 6 years I have continually struggled with idling problems. It cuts out, threatens to die on you, recovers, runs well for a fortnight and...


You can clean these with brake cleaner or something comparable. Brake cleaner doesn't leave a residue. If it is mounted directly to the throttle body, then clean all of it. Start the car rev it up and spray it in, Keep the rpm's high enough so not to kill the engine. You don't have to use the entire can. Fords are the same way, the start to run bad because the MAF gets contaminated with oil and dust, spray them off and all is good till next time. Just a note.... Never use a brush or anything on the MAF, as you said they are very sensitive

Jul 20, 2011 | Mazda Protege Cars & Trucks

1 Answer

2003 Chevy Trailblazer V-6 4WD. I just got the oil changed. I think I made a mistake and told them to put in 10w-30 instead of the 5w-30 that the vehicle was used to. Since then, my SUV has been sputtering...


CHECK YOUR OIL DIP STICK MAKE SURE YOU HAVE ENOUGH OIL IN THE CRANKCASE.YOUR ENGINE CALL FOR 7 QUARTS OF OIL. IF YOU HAVE THE INLINE 6 CYLINDER.CHECK OIL LEVEL ON DIP STICK.YOU SHOULD BE AT FULL MARK.AND NOT ON THE LOW MARK.IF SO YOU NEED ADD LITTLE MORE OIL TO GET TO THE FULL MARK.YOU CAN USE 10W 30 FOR SPRING AND SUMMER WEATHER. 5W 30 FOR COLD WEATHER COLD CLIMATE.I RUN 10W 30 YEAR ROUND IN ALL MY NEW CHEVY AND OLDSMOBILE VECHICLE HAD NO PROBLEMS.IF OIL LEVEL CORRECT YOU COULD HAVE FUEL PROBLEMS.COULD HAVE STOPPED UP FUEL FILTER, BAD GAS,

Apr 12, 2011 | 2003 Chevrolet TrailBlazer

2 Answers

I need a photo of the spark plug wiring oder on a 1979 chevy silverado with a 308 engine


Wow, a reply about an Australian based engine. I'm thinking since there is no reply that he just may have a US based engine just posted the wrong size. in which case this might help.
Here is a website with the American Version of Chevy info


1.8.4.3.6.5.7.2 distributor rotation clockwise

http://boxwrench.net/specs/chevy_sb.htm


Great Stocking Stuffer for a Gearhead!
Small Block Chevy V8
267, 305, 327, 350, 400 cid.
Firing Order
v8_18436572.gif Cylinder Numbering Distributor Rotation gm_cyln_1357.gif v8_dist_ro_c.gif Rotor Under Cap Spins:
Clockwise

Aug 05, 2010 | 1983 Chevrolet Silverado

1 Answer

1979 chevy van motor-home 30 5.7 firing order


this is a 5.7l engine diagram. pay no attention to the impala reference. all 5.7's are similar

http://www.classiccarauto.com/impala/how_to/images/distributor.png

May 22, 2010 | 1980 Cadillac Eldorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...