Question about 2002 Mitsubishi Lancer

1 Answer

Timing Belt Where can I get diagrams and directions on how to remove and replace my timing belt on my Mitsubishi Lancer 2003 2.0L

Posted by on

  • 3 more comments 
  • smith smith Dec 22, 2008

    need help a diagram for replacing a timing belt for 2003 lancer with a 2.0 motor

  • smith smith Dec 22, 2008

    a diagram for timming belt for a 2003 lancer with 2.0 motor

  • Anonymous Apr 26, 2009

    Neither Chilton nor Haines make a repair manual for the 03 lancer according to the guys at o'riley. I know I have yet to be able to find it anywhere

  • Anonymous Mar 15, 2014

    REPLACE TIMING BELT ON MITSUBISHI LANCER 2003

  • Anonymous Mar 17, 2014

    2003 lancer replace front left seatbelt

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 125 Answers

Haines/ chilton/ mitchell repair manual. but if you are not the mechanically inclined, take it to a pro. it is possible to more harm than good.

Posted on Sep 26, 2008

  • kyle featherstone
    kyle featherstone Oct 23, 2014

    are those moters interference engines

×

2 Suggested Answers

  • 1757 Answers

SOURCE: mitsubishi lancer evolution 8 timing belt

Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2003/make/mitsubishi/model/lancer/2003_mitsubishi_lancer_timing_belt_diagram_marks.htm

Posted on Mar 22, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install need diagram of timing belt replacement


2003 Mitsubishi Lancer 2.0L MFI 4cyl

zjlimited_403.jpg

Fig. Accessory drive belt routing-1.8L, 2.0L (SOHC), and 2.4L (4G69) engines


zjlimited_404.jpg

Fig. Accessory drive belt routing-2.0L (DOHC) engine




zjlimited_405.jpg



Fig. Accessory V-belt routing-Mitsubishi 1.5L, 1.6L, 1.8L, 2.0L and 2.4L engines


Hope helps (remember to rate this ansswewr).

Jan 05, 2011 | 2003 Mitsubishi Lancer

2 Answers

Where are the timing marks on a 2004 mitsubishi


Click on the following direct Link. It has the Tining Belt Diagrams that will match your specific engine.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2004/make/mitsubishi/model/lancer/2004_mitsubishi_lancer_timing_belt_diagram_marks.htm

Mar 18, 2010 | 2004 Mitsubishi Lancer

1 Answer

Were do you set the timeing at on a timeing belt for the lacer


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 2003 Mitsubishi Lancer. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2003/make/mitsubishi/model/lancer/2003_mitsubishi_lancer_timing_belt_diagram_marks.htm

Mar 15, 2010 | 2003 Mitsubishi Lancer

1 Answer

Change timing belt galant 04 mivec 2.4


49885ff.gif
Timing belt “B” (balancer belt) and related components—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


  1. Disconnect the negative battery cable. Remove the engine under cover.
  2. Remove the crankshaft damper pulley.
  3. Disconnect the control wiring harness connector, battery wiring harness connector and connector bracket to engine mounting insulator.
  4. Remove the harness bracket. Remove the upper timing belt cover. Remove the water pump pulley. Remove the idler pulley.
  5. Remove the auto tensioner. Remove the lower timing belt cover.
  6. Turn the crankshaft clockwise and align each timing mark to set the number one piston to TDC of its compression stroke.
  7. Remove the timing belt under cover rubber plug and then install special tool MD998738. Screw the special tool until it contacts the timing belt tensioner arm.

    NOTE The special tool must be screwed in gradually at the rate of a 30 degree turn per second. If it is screwed in all at once, the timing belt tensioner adjuster rod will not easily retract and the tool may bend.

  8. Gradually screw in the special tool and then align the timing belt tensioner adjuster rod set hole “A” with the timing belt tensioner adjuster cylinder set hole “B”.
  9. Insert a wire or pin in the set holes to lock the assembly in place. After removing the special tool, loosen the timing belt tensioner pulley mounting bolts and remove the timing belt. If the belt is being reused be sure to mark the direction of rotation (clockwise) on the belt.
  10. Remove the timing belt tensioner pulley, tensioner arm and adjuster.
  11. Remove the timing belt idler pulley. Remove the timing belt lower cover bracket. Remove the crankshaft position sensor.
  12. Remove the crankshaft pulley center bolt and washer. Remove the drive sprocket. Remove the crankshaft angle sensing blade.
  13. Remove the balancer timing belt tensioner. Remove the timing belt “B” (balancer belt) from its mounting.


284eb62.gif
Timing belt tensioner adjuster rod set hole “A” and cylinder set hole “B”—2004–2005 Galant and 2004–2005 Lancer 2.4L engine

To install:


78b2d67.gif
Belt tension checking—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


b8fcecc.gif
Cylinder block plug location—2004–2005 Galant and 2004–2005 Lancer 2.4L engine


bad1ef9.gif
Timing belt sprocket alignment—2002–2004–2005 Galant and 2004–2005 Lancer 2.4L engine

Feb 27, 2010 | 2004 Mitsubishi Galant

1 Answer

Mitsubishi lancer evolution 8 timing belt


Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2003/make/mitsubishi/model/lancer/2003_mitsubishi_lancer_timing_belt_diagram_marks.htm

Jan 13, 2010 | 2003 Mitsubishi Lancer

1 Answer

Timing belt diagram mitsubishi colt 1.6 1999 t plate


My apologies for the delayed response. I am going back and answering questions that were never answered.
Click on the following Link. It has all the Diagrams for the Timing Belt you will need.
Before Clicking, let me know if this helped.
Again my sincerest apologies...

http://www.2carpros.com/car_repair_information/year/2003/make/mitsubishi/model/lancer/2003_mitsubishi_lancer_timing_belt_diagram_marks.htm

Dec 15, 2009 | 2003 Mitsubishi Lancer

1 Answer

2003 lancer looking for timing marks for the timing belt


Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2003/make/mitsubishi/model/lancer/2003_mitsubishi_lancer_timing_belt_diagram_marks.htm

Oct 11, 2009 | 2003 Mitsubishi Lancer

1 Answer

Where are the timing marks for a 03 lancer es


Review this diagrams:


95ca36c.jpg


Fig. Timing belt sprocket alignment -3.5L engine

11ba938.jpg


Fig. Align the timing belt sprockets as indicated before removing the timing belt-1.5L engine

85de856.jpg

Fig. Align the timing belt sprockets as indicated before removing the timing belt-1995-00 1.5L engine


9e2e94d.jpg

Fig. Camshaft and crankshaft sprocket alignment for proper timing belt replacement-1.8L and 2.0L SOHC engines

3bc921b.jpg

Fig. Silent shaft sprocket alignment marks for belt replacement-1.8L and 2.0L SOHC engines

I hope help you with this; remeber rated this help.

Aug 24, 2009 | Mitsubishi Lancer Cars & Trucks

1 Answer

Timing belt diagram lancer 1.5 1988


Here's the picture of the timing marks.

0e3bbfd.png

Jan 13, 2009 | 2002 Mitsubishi Lancer

Not finding what you are looking for?
2002 Mitsubishi Lancer Logo

997 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...