Question about Mitsubishi Lancer

1 Answer

Windows do not work lancer glxi 94

Tried four different driver switchs, changed relay and checked all fuses and fusable link. the only other thing i can think of is the ecm, i think its called that. can this effect the windows from operating if faulty or maybe theres a lose connect some were ?

Posted by on

  • kevoconn84 Sep 28, 2008

    When every individual window motor is connected directly from the battery they operate properly.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can you hear the motor run? but the windows dont move?

Posted on Sep 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix ac clutch that engage all the time


Bad controller or a shorted wire to the clutch. Pull the fuse or relay to turn it off. Fixing it takes a volt /ohm meter and tracing wires. Electrical schematics help also.

Dec 02, 2015 | 1998 Mitsubishi Lancer

2 Answers

I have a 1995 Pontiac Grand Prix SE. All four windows have been stuck in the down position since 3rd quarter 2009. I have tried replacing the fuse and the driver's side switch board without success. I...


If the driver's side control panel has a "window lock" feature, make sure it is in the unlock position. Since you have already checked the fuse,look for a circuit breaker in the fuse box under the hood.

Dec 30, 2010 | 1995 Pontiac Grand Prix

2 Answers

1996 VW jetta will not start


You vehicle works off a standard ignition key which links to a electrical ignition switch. The wire from the switch goes to the starter solenoid. That wire has a fusable link which operates like a fuse. If to many amps surge through this wire it will melt down inside the insulation. The insulation will not melt away causing a headache to most novice mechcanics. Pull on the solenoid wire a few inches away from the solenoid and see if it stretches at least 1/8 of an inch or more. If it does it has an open stopping the continuity to the positive lug to the solenoid preventing it to work. Any auto parts store sells these fusable links. The counterperson will suggest the crimping supplies and tools needed to purchase for this repair

Mar 27, 2010 | 1996 Volkswagen Jetta

1 Answer

Drivers seat heater will not switch on. New fuse installed.


the switch works the relay, the relay powers the heater, being a 12volt heating element, it's bound to have a good size wire going to it, make sure the wire feeding that relay is hot, it will be a larger inline fuse or a fusable link,it will come off a main power source,I.E. the starter or something like that, the small fuse you replaced is for the relay curcuit,good luck

Feb 01, 2010 | 2000 Buick LeSabre

2 Answers

Mitsubishi Lancer 1.6l Glxi - 91 that wont start.


check/replace the fuel filter. the fuel pump is defective.

Dec 03, 2009 | 2008 Mitsubishi Lancer

1 Answer

All windows in my ml320 STOPED WORKING AT THE SAME TIME. cOULD IT BE A FUSE?


Yup, or a relay, or a solenoid. It could also be the switch. Have you tried each window at it's own door switch, or just tried the driver's switch that has all 4 window buttons? If the other ones work, but not the driver's switch, it's a wiring issue related to the driver's switch. If None of them work anywhere, have a repair facility or dealership perform electrical diagnosis (they'll be checking powers and grounds along the wiring, from the switches, to see where the issue is after checking your fuses and circuit breakers or any pertinent relays or solenoids).

Please note: All four window motors/regulators/switches failing at once is extremely hard to believe. If the vehicle was hit by lightning, maybe, I could see that happening, but if it hasn't been struck by lightning, don't let anyone sell you multiple motors/regulators or switches.

Most likely, you've blown a fuse or relay.

Hope this helps.

Jul 10, 2009 | 2007 Mercedes-Benz ML320 CDI

1 Answer

Windows wont roll down


Check all fuses , or fusable links

Apr 28, 2009 | 1992 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...