Question about 1999 Hyundai Accent

2 Answers

Cannot shift gears

I was shifting gears in my car a couple of days ago. There was a pop sound when I was putting it into reverse and from there I cannot get out of reverse from inside the car. When I pull on the linkage under the hood I can change the gears but I still cannot shift from inside the car. Any suggestions? Thanks.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Hi not 100% sure but sounds like your gear link selector has either worn or broken. it is probably best to see a mechanic to fix this problem as i had similar problem in a 98 accent saloon, and found this very difficult to do myself. hope this helps.

Posted on Feb 08, 2009

Maybe a blown fuse?

Posted on Sep 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 nissan pickup started popping out of 5thand sometimes it won't even go into 5th gear,while other times it will shift out with ease.


Sounds like the shift fork is failing or the slider for that fork. Should be same fork and slider for 5th and reverse

Jun 02, 2015 | Nissan Pickup Cars & Trucks

1 Answer

What could the problem be with 1999 villager wont go forward or reverse?


I forget the name, but it could be the shift connecttion. It the connection point behind the shifter in the car and the transmission. The port disconnected mine in my car cause they couldn't figure out how to shift it. It basically put the car into nuetral. No forward no reverse. But engine runs fine.

May 20, 2014 | 1999 Mercury Villager

1 Answer

I have a problem with my shift gears, in order for me to drive (D) I have to put in on 1 or 2, to reverse (R) I have to put in on (D) drive, to park (P) I have to put it on reverse (R). Tell me what's


sounds like the cable from the gear stick to the gearbox selector switch has been put on wrong ,put the car into reverse so that the reverse light is on , turn the ignition off and find the gear selector on the gearbox , pop the end of the cable off it then put the gearstick into the "R" position and refit the end of the cable back onto the selector switch , hope this helps

Feb 11, 2013 | Cars & Trucks

1 Answer

I have a '94 F150, straight 6, 4wd, 5 speed manual trans. My transmission shifting knob popped out of it's position and was stuck in a gear. I opened up the cover and was able to move the gear manually...


it seems like your shift fork is in between gears you must remove the shift tower and align all the shift levers then drop the shift knob into the middle being neutral tighten it up and it should be ok but remember the replacement could be slightly thinner then the original and causing this new problem.

Nov 13, 2010 | Ford F-150 Cars & Trucks

2 Answers

My car will not shift gears or go into reverse. HELP!


So I'm guessing that when you put it in reverse and it won't move. If you put it in 1st it moves but won't shift to 2nd? And it rattles. And since you have a 4.9 in it the transmission is a 4T60E. I am going to guess that you broke the reverse reaction shell in the transmission.

Apr 25, 2010 | 1995 Cadillac DeVille

1 Answer

1995 camero z28. Transmission changes all gears smoothly including reverse. When I put it in park the car still rolls as if it is not in park. I thought I heard a pop a few days ago.


It sounds like there is an issue with either the shift cable or either the parking paw inside the transmission. You should be able to take to a local transmission shop for a quick diagnosis.

Jul 03, 2009 | 1995 Chevrolet Camaro

1 Answer

94 Chrysler Concorde Tranny Problems


Have your transmission oil filter changed;
it is located under the transmission pan
The oil is what makes the transmission shift
When you shut off the engine it stops the transmission pump then when you start up again the transmission shifts until the filter clogs again

May 28, 2009 | 1994 Chrysler Concorde

1 Answer

Transmission - no reverse


i had to put a new trans in my 2000 jimmy about a year ago there is something inside called a "reverse hub" its made from aluminum and not very hard to break..when mine broke i was stuck trying to move in reverse and it heard a pop then a winding down noise and sure enough its the reverse hub to fix it i just had the trans rebuilt

Sep 08, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
1999 Hyundai Accent Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

68032 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...