Question about 1993 Nissan 300ZX

1 Answer

Srs I have srs light blinking on and off after replacing driver side air bag. I need to diagnos system and reset it. Need help. 93' nissan 300 zx non turbo manual trans. myarkebuz@yahoo.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Diagnosis of the system would normally require a scan tool. Since you just replaced the airbag on that side, logic says that it's the reason that the light is on. Did you replace it because it blew? Or was it for some other reason? Try disconnecting the battery for 30-60 minutes and then reconnecting it - it may be that since the bag was undone, the ECU has logged that fact and may need a reset to clear the SRS code. Try disconnecting the battery for an hour or so, or two, and then reconnecting it. Let me know as a reply on here if that worked, and we'll go from there if you still have the fault indication.

Posted on Sep 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 fusion reset air bag light in cluster


Light on idicates a problem with the air bag system , there is a DTC - diagnostic trouble code stored in SRS control module . To reset the light , code has to be diagnosed and fixed for the light to go out . If you don't know that your best bet would be to take it to a qualified repair shop . Special tools are needed to diagnose and repair SRS systems . People not knowing what they were doing have been killed .

Dec 29, 2016 | Cars & Trucks

1 Answer

RESET BLINKING AIR BAG LIGHT NISSAN ALMERA 1.6


Can't -- it will just come back

The air bag is turned off for now,
until you check for SRS System Codes,
& make the required system repairs

Not read your owners manual or studied
OBD Vehicle Systems?

Oct 03, 2014 | 2005 Nissan Almera 1.6

1 Answer

How to rest the air bag light on nissan cefiro 1999


The SRS airbag light kept on because the BCM detects there is a fault in the SRS system and the air bag light is on the system is not working and will not deploy while the accident happened. So it is very dangerous. Then you have to reset your airbag.
airbag reset tool

Mar 11, 2013 | Cars & Trucks

1 Answer

Air bag light on code 32 try too reset srs dont work


The seat is not part of the srs system

Have to diagnose two different problems

You don't reset things on vehicles,you diagnose
failed systems,make the repair & then clear all codes
& data,not resetting anything

Feb 02, 2013 | 2001 Lincoln LS

1 Answer

I have a 2001 Nissan Maxima. The air bag lite is staying on. Is this important? How do I turn the ligt off?


If the light comes on while you're driving the vehicle, there's a malfunction in the SRS System (Air Bags System). Have it inspected and repaired as soon as possible. DO NOT attempt to troubleshoot or service the SRS System yourself, even a small mistake could cause the SRS System to malfunction when you need it.

Aug 10, 2010 | Nissan Maxima Cars & Trucks

2 Answers

My srs light is on


Hi the srs light being on means your air bag system needs servicing, the reason being is that air cannistors that fire the air bags only have a certain life limit, once they reach this limit they need replacing as the air bag system wont be working properly until you get this serviced.

its not a job you can do yourself as the general public cant get the parts to do the work nor the machine to reset the system.


May 04, 2010 | 1997 Honda Civic

2 Answers

I had a fender bender that pushed in front bumper and blew both air bags and cruise control. i have had bumper/frame repaired and i need to know where/how many sensore need to be replaced when i replace...


you should only have to place the front crash sensor and both air bags and you may have to replace the clock spring behind the steering wheel it usually breaks after an impact i would recommend you have a qualified technician do this work

Jan 18, 2010 | 2001 Ford Escape

2 Answers

2001 air bag light flashing - what is reset fix?


Here's a quick check list for most common cost of SRS / Air bag problem.


Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat

(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity2_bing.gif problem.

I DO NOT disconnecting the negative battery connector to clean the code(s)

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate me answer if it is useful to you.


Cheers,

Mustgo

Nov 16, 2009 | 2001 Mercury Villager

3 Answers

RESET SRS LIGHT


Here's a quick check list for most common cost of SRS / Air bag problem.


Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat

(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity2_bing.gif problem.

I DO NOT disconnecting the negative battery connector to clean the code(s)

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate my answer if it is useful to you.


Cheers,

Mustgo

Oct 07, 2009 | 1999 Acura TL

1 Answer

SRS light flashing all the time, what can be done to reset this light-nissan maxima 1999 125,000 miles srs system never been touched.


Does it have leather seats?? if so, you most likely need one of the side air bags. Most likely drivers side.

Jul 24, 2008 | 1999 Nissan Maxima

Not finding what you are looking for?
1993 Nissan 300ZX Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...