Question about 1993 Mercedes-Benz Mercedes Benz 300 Class

1 Answer

Radio i have my code but i dont know how to get radio back on. when i push the power button on the word WAIT keeps flashing. how do i reprogram my radio? HELP!!!!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mercedes-Benz Master
  • 1,619 Answers

Wait 12-24 hours then try again 3-6 with the car on. Go to peachparts.com for more assistance with this.

Posted on Jul 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reprogram the Radio


If you have a owners hand book or can get a copy from the web the there is a section on how to install the code and save it in the radio . In some radios it is as simple as pushing the set button twice .

Feb 14, 2014 | 2000 Audi A4

2 Answers

I have an 08 honda ridgeline and my battery died and i dont know the code to unlock it. any help? im pretty sure i didnt change it so its probably the factory one.


You need the code for the radio right? If so push and hold the 1 and 6 and push the power button. you will have two sets of numbers come up on the screen write these down and call your dealer. Give them the numbers and tell them you need a radio code. Then input the numbers in the radio and push the fm button.

Dec 01, 2010 | 2008 Honda Ridgeline

1 Answer

Clio radio just beeps at me+wont accept code!


enter the radio code by pushing buttons 1,2,3,4 on the radio and then push button 6 to confirm the code

if code is 3756 you sohuld push button 1 for 3 times, button 2 for 7 times...and then button 6 for few seconds

May 13, 2009 | 2000 Renault 181

1 Answer

Radio just reads "off" when you turn it on


Push the volume button to switch it on..Then enter the code.

Apr 06, 2009 | 2001 Volvo V40

2 Answers

Chevy aveo issues


If you mean change the code needed to input into the radio then the only way it to take it apart and reprogram it. That would cost more then the radio itself.

So if you can't get the code in your either have the fix the button or get another radio.

Sorry

Apr 02, 2009 | 2006 Chevrolet Aveo

1 Answer

What do these codes mean on 1994 Cadillac Eldorado -A012 and A047


Sound like you have a bad cv "constant velocity joint " REPLACE.

The first thing you need to do is to clear your old codes then drive

and see if they come back .

1. Re-enter back into the climate control panel and after all the codes display the display will stop at PCM?

2. Push and release the FAN UP (^) button on the climate control panel and you will see PCM DATA?

3. Keep pushing and releasing the FAN DOWN (v) button until you see PCM CLEAR CODES?

4. Push and release the FAN UP (^) button and you will see PCM CODES CLEAR?

5. Wait 5 seconds and then keep pushing the OFF button until you see PCM?

6. Push and release the FAN DOWN (v) button and you will see IPC?

7. Push and release the FAN UP (^) button on the climate control panel and you will see IPC DATA?

8. Keep pushing and releasing the FAN DOWN (v) button until you see IPC CLEAR CODES?

9. Push and release the FAN UP (^) button and you will see IPC CODES CLEAR?

10. Wait 5 seconds and then keep pushing the OFF button until you see PCM?

11. keep Pushing and releasing the FAN DOWN (v) button and you will see ACP?

12. Push and release the FAN UP (^) button on the climate control panel and you will see ACP DATA?

13. Keep pushing and releasing the FAN DOWN (v) button until you see ACP CLEAR CODES?

14.Push and release the FAN UP (^) button and you will see ACP CODES CLEAR?

15. Wait 5 seconds and then keep pushing the OFF button until you see PCM?

16. keep Pushing and releasing the FAN DOWN (v) button and you will see SIR?

17. Push and release the FAN UP (^) button on the climate control panel and you will see SIR DATA?

18. Keep pushing and releasing the FAN DOWN (v) button until you see SIR CLEAR CODES?

19. Push and release the FAN UP (^) button and you will see SIR CODES CLEAR?

20. Wait 5 seconds and then keep pushing the OFF button until you see PCM?


21. Push the AUTO button to get out of diagnostics.

22. Turn ignition OFF for 15 seconds.

23. Re-enter diagnostics and see if any history codes re-appear.



Mar 27, 2009 | 1994 Cadillac Eldorado

2 Answers

I need to reprogram my 2001 Honda Civic radio


in your drivers manual there is a section for your radio. there is a code hopefully there or you might have to consult the dealer who should of given it to you when you purchased the vehicle. Anyways, you punch in that coed on your radio buttons and then you can program it.

Feb 28, 2009 | 2001 Honda Civic

1 Answer

How to program 1995 900se saab radio


Tune to the first and lowest station on the band that you want and push and hold button number one (in the row of buttons immediately below the station display) until the number shows on the display and flashes. Pre-set one is now that station. Repeat, using button two for the next, and so on, until you have all the stations you want programmed.

Dec 30, 2008 | 1995 Saab 900

2 Answers

I have a radio in a 91 560 that needs recoded.


hi,you my leave the radio,with wait in display with in 10 to 24 hours,then code automatic appear in display,then enter the right number,careful,3 times wrong,wait appear again,ty

Dec 12, 2008 | 1991 Mercedes-Benz 560

3 Answers

Focus remote key fob not working


this info would cost you £30.+ at ford Radio Frequency Programming Instructions:
  • Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds.
  • Remove the ignition key. The locking control system is now in "learn mode" for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this.
  • During the 20 seconds press one of the transmitter buttons. The remotes signal and code number is learned by the locking module and is indicated by flashing the warning system LED.
  • Wait until learn mode times out (20 seconds) or switch the ignition back to ON.nfrared Programming Instructions:
  • Put your key into the ignition and turn to position 1 (Radio). After approximately 10 seconds the red alarm control LED (next to the clock) should illuminate. As soon as it comes on remove the key from the ignition - the LED should remain lit.
  • Point the remote's "eye" at one of the front door sensors and press the rear button until the light on the transmitter illuminates (Keep the button pressed)
  • With the rear button held in press the front button 4 times then release both at the same time. The control lights in both clock and fob will flash 4 times to indicate programming complete.
  • Turn the ignition back on to exit programming mode

Nov 28, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...