My abs light is on and my brake light blinks when i start to drive. i have already replaced the abs module, what else could it be?

Sounds like a short in the ABS module. Need to replace it and or check the wiring to it. Not sure where the module is though!

ABS LIGHT AND MODULE TROUBLESHOOTING:

Anti lock brake system light comes up when there is issue with car brake systems. It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly. Your vehicles brake system needs inspection.

To troubleshoot these issues, I suggest you to refer the help links provided below. There are direct links with accurate solution, for these specific issues.

Click the link below and follow the procedure: ------

All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------

ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------

VCS and ABS lights go on and off intermittently on Lexus?

http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html

-------------

The ABS and Traction Control Lights stays ON dash of car?

http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

-------------

ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------

Battery Light and ABS Light on Dash

http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------

Sometimes ABS light comes on while Driving?

http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html

-----------

How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------

Brake System Troubleshooting?

http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------

Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------

ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------

2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------

2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------

ABS & Brake warning lights remains steady on dash?

http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html

------------

Can I drive the car without ABS fuse connected?

http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------

Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------

ABS motor keeps running?

http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------

When the car stops, abs pump turns ON?

http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------

Replacing ABS unit on Buick Century?

http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------

2008 Toyota Tacoma: ABS causes Brake pedal fade?

http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html

--------------

Toyota Camry: Premature ABS Actuation?

http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------

How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------

How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------

How to remove ABS Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------

These details will help.

Thanks.

Nope, but take it in. Brake problems are nothing to fool with They'll probabl tell you it's the ABS ECU. Not a cheap item.. However, it only affects the ABS system, not the brakes itself.

it's a good chance your ebcm "brake control module'

GOOD LUCK

Had the same thing happen on my 02 S10. Had to replace the module. I got one from the junkyard. There are also places you can send it in for rebuild. If you want to DIY, maybe try googling for videos on it. Youtube probably has some. No idea if they work or not

Check speed sensors on the front.Clean them with a non chlronated brake cleaner this most likely the problem.

When this warniing light usually comes on, means that you have a failed wheel speed sensor but these vehicles are common for the ABS module to fail causing the same problem. You can back probe the wires comming out of each wheel speed sensor with the wheel lifted in the air and check for ac voltage as you spin the wheel.

What ever sensor does not put out voltage needs to be replaced if they all seeem to work it is likely the ABS module. But before you replace any parts you would want to have the ABS module checked for codes at one of your local shops that has a high end scantool that can access those codes. If some job was make there, I suggest re-check harnesses connections and right tight.

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.

As a general rule, if you have ABS you might have to cycle the pumps and valves to purge the old fluid out of the unit. This is either done via a dealer scan tool, a purge valve/bleeder valve on the ABS unit, or a less than ethical way. Drive your car and heavily engage the ABS, you know what I'm talking about.
Then you will need to repeat the bleeding process that you have already done.
Normal non ABS brakes, bleed once.
ABS brakes, bleed, cycle then bleed again.

there are 2 options, ABS module is most likely, I just had my ABS module remanufactured and it worked greate when i re-installed.

the second option is the wheel sensor could have a bad connection(may have been bumped when your bearing got looked at.

there are a few companies that repair ABS modules, i used modulemasters, they did a good job, i can not vouch for any of the other companies.

Bleed right rear,left rear, right front, left front in that order to be sure of good bleed but the brake booster makes it easy to push pedal. Make sure of no leaks from master cylinder. Otherwise brake hoses being soft will also hurt baking quickly.