Question about 1999 Oldsmobile Intrigue

3 Answers

Replaced ecm on my 1999 olds intrigue still want start

My car just died on me .had lights and turn signals radio played and it just would not turn over nothing. everyone said to get another ecm and have it flashed which i did had it put in and itd still just like before. you can tuen the key on it will not turn over .

Posted by on

  • summergumbo2 Sep 26, 2008

    No the security light is not flashing.Everything comes on it just will not turn over at all.

  • TylerDurden Apr 11, 2009

    I have the same problem every few months. Mechanic couldnt find problem. They thought it had something to do with security system. When it happens, car usually starts in about 10-15 minutes. I usually will turn everything on- then off. Then shift through all the gears. Then I get out and lock/open/lock evey door & trunk. Both with remote and manually. Then it starts. Other times I do nothing. Leave it over night and it starts up fine in the morning.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

I had the same problem...solved by changing the fuel pump... its in the trunk behind the seats... cost was 75.00 at junk yard.. took me about 2 hours to change... solved my problem

Posted on Jan 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had similar problem and mech. found some wiring near my starter that were loose or bad.
they thought it was battery but these wires were draining battery i think.
all is fine now after that.
the conrads in solon ohio figured this

Posted on Oct 25, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

Is the security or theft light flashing if so it is a pass key issue

Posted on Sep 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal doesn't work


Remove old light bulb. Clean all contacts, put some die-electric grease on the new bulb, reinstall. Since I did that to my Intrigue I haven't any problems with bulbs blowing. I think it's a problem with moisture getting inside and the grease stops the bulb from shorting out.

Apr 20, 2013 | 2000 Oldsmobile Intrigue

1 Answer

1999 oldsmobile intrigue randomly dies. this happens at red lights and any and all speeds. Occasionaly the rpms spike before it happens. Please help!


The famous problem on your vehicle is what went out first,spark or fuel.You have three main player here one is the cranksensor,the other is cam sensor and the third is the ICM (ignition control module).They work together and sometimes fail together. Because the RPM spike I would say go with the crank sensor Its is a 3x synch signal and a 18x signal,what this means is that the ECM must see a RPM of 250 or the fuel pump shuts down (because it thinks its not running).So no fuel and no spark .for the Cam sensor its just a misfire detection and a synchroniser. It recieves signal for both of these component.and varys ignition. All in a nut shell replace the cranksensor it is in front of the crank pulley plus it is the hardest working device its magnetic and it can easily loose its magnetic property.plus its the most cost effective repair.

Mar 06, 2012 | 1999 Oldsmobile Intrigue

1 Answer

99 olds intrigue front signals dont work rear ones do


the trun light signal socket is burn out you have to replace it

Jun 16, 2011 | 1999 Oldsmobile Intrigue

2 Answers

Turn signals not flashing on a 1998 Old Intrigue,


Do the lights come on but, just don't flash? It could be the turn signal flasher. The owners manual should show the location.

Feb 20, 2010 | 1998 Oldsmobile Intrigue

1 Answer

Why does the engine just die in my 1999 Olds Intrigue?


You need to do some basic tests to eliminate or get closer to the issue. Possibilities: 1) Fuel delivery 2) Ignition signal lost temporarily 3) Engine air leak - causes rough slow idle/stalling. 4) Bad MASS air flow sensor. etc, etc.

Oct 21, 2009 | 2000 Oldsmobile Intrigue

4 Answers

1999 Olds Intrigue Front blinkers don't work, bulbs are good and so are the fuses. Back blinkers do work, but blink fast. Hazards work too.


The most common cause will most likely be the turn signal/multifunction switch. Hard to confim it without testing the outputs from the switch. I have replace more than 100 on this body style of car

Jul 29, 2009 | 1999 Oldsmobile Intrigue

2 Answers

1999 Olds ignition switch problems


Hi....
In your Intrigue to use the New Passcode sensor .
You need to program the new Passcode to the ECM. of the Vehicle.
This is a prosses that involve around 30 minutes maybe a little more.

Remove the old Ignition switch.
Install the new Ignition switch. with the new Passlock sensor.
Turn the key to on position and try to start a few senconds. them leave the key on run position.
For 10 minutes and NOT more than 11 minutes.
Them turn the key to OFF position for exactly 30 seconds.
Them turn the key to Run position 10 minutes or 11.
them turn back the key to OFF position for 30 seconds.
Them turn the key to Run position 10 minutes or 11,
Turn the key to OFF position and wait 1 minute, them try to start the vehicle.
If the car start you are DONE.
But if Not Letme know to give you more information.

OK I hope this help to try solve your problem.

Thank you for use fixya...

Nov 15, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...