Question about 1997 Hyundai Accent

1 Answer

MECHANICAL FAULT I HAVE A WINDING NOISE COMING FROM THE FRONT DRIVERS SIDE, i HAVE CHECKED THE BRAKES AND FRONT WHEELS FOR ANY ROCKING MOVEMENT AND FOUND NO EVIDENT PROBLEMS? PLEASE ADVISE IF POSSIBLE!

Posted by on

  • Anonymous Sep 28, 2008

    i had a big noise coming from tha driver side front wheel

  • don May 11, 2010

    Is the noise when driving?
    or turning?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

This may well be the n/s front wheel bearing in early stages of deteriation/ runnig dry and may not yet show any movement at wheel to check support car remove wheel then ether push pads back ?clear of disc or rmove caliper then feel for undue feel of wheel bearng as you manually turn the hub i have had these probs on other cars and found bearing race had turned blue due to lube loss/breakdown easy diy and not too expensive if you feel confident/inspired rather than ££££s garage charges ? hope this helps

Posted on Oct 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light thumping sound when turning,could this be brakes


Could be universal joints, struts, or wheel bearings too! Get underneath your car, put your front end on Jack-Stands for safety, and grab hold of the tie-rods and check for movement up and down. If they seem tight, do the same with your front struts... it's movement your looking for. Spin the front wheels with the wheel covers off and listen for noise. They should spin freely. Brakes usually make a scraping sound... metal to metal. Any thumping when you brake hard... like a panic stop is normal. The ABS brakes are supposed to do this.

Mar 21, 2015 | 1998 Ford Escort

1 Answer

Why is my car making (dry) noise when stopping or getting out of car? I can duplicate noise by rocking front of vehicle.


By rocking do you mean rocking the car up and down? When you put on the brakes does the car lunge or dip forward? If so, the problem may be the front struts. The struts on a car are a commination of shock absorber and spring. If the strut is shot the car will bounce up and down. Struts are replaced as pairs.

Have the car checked out at Firestone Tire or Monroe Muffler, or if you have a local repair shop that you use, go to them, and ask for an inspection of the front struts.

May 26, 2014 | 2008 Pontiac G6 Sedan

1 Answer

1998 Contour, clicking noise coming from front wheel on drivers side as I'm driving(it's a consistent click)


With out hearing the noise it is hard to say but it could be a wheel bearing but most of the time a bearing will hum, this could be a bad cv axle or a brake brake hitting the bracket, try to drive the car and hit the brake a little and see if the clicking goes away, if it does then i would say it is in the brakes. if it does not then have the cv axle checked.

Oct 14, 2012 | 1998 Ford Contour

1 Answer

My 1997 landrover discovery rear windows will not go up. have checked all fuses.


This can be due to the possible reasons as follows:
1. Fault in the door switch , rocker switch contact being faulty.
2.Fault in the wiring harness that has snapped at the door hinges section.
3. Fault in the winding motor., remove and check for forward backward movement.
4. Mechanical jamming of the winder, remove and reset if there is tightness in the glass channel.
5.Fault in the electronic circuit/ load trip off circuit.

Sep 14, 2011 | 1997 Land Rover Discovery

1 Answer

2003 Trailblazer, the front drivers side wheel locks up and won't turn more than half a turn forward then the same backward. Making a bad clunk noise if you try to force it by giving the truck more gas to...


It sounds like a problem within the front differential, possibly broken spider gears. If so broken gear shrapnel may be jamming that wheels output shaft.

Feb 11, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

Rattling noise coming from the driver side of the car when I drove over 40 miles per hour.


It sounds like 1 of 2 problems but to start with jack up the drivers side rear of car and block front wheels with 2 blocks of wood or 2 bricks , put a stand under chassis and then your safe to work.
Release hand brake and spin rear wheels ..and then hold 1 hand bottom and top and try to shake the wheel.. any movement means worn bearings ..any noise when spinning means worn wheel bearings..If ok
get under the car and bang the exhaust all along and if the rattle comes when you get to the muffler you have you answer.
Let me know how you get on . RON

Nov 11, 2009 | 2001 Toyota Camry Solara

3 Answers

2002 Jeep Grand Cherokee Laredo - whining noise driver's side


checked the wheel bearings and sometimes the clips will rub the rotors

Sep 08, 2009 | 2002 Jeep Grand Cherokee

2 Answers

Screeching noise coming from driver side tire


The high pitch sound may come from the brake pads as metal parts hit the disc to signal the owner that it needs change. The metal parts gets exposed when the pads have worn out. The brake also has a hub to cover the disc. See if the metal plate is hitting it but this issue would appear when the wheels are in motion. Check if it is the belts, have the tension checked out. Other than that the bearings are the other items on your wheel that could cause a high pitched sound when you car is in motion.

Aug 09, 2009 | 2005 Dodge Neon

1 Answer

2003 Chev Venture Van Moaning Noise


hi from uk from your symptoms re moaning frm drivers side ? assume front?? best advice at this stage is to raise the front wheel and check for any undue wear in the wheel bearing by rocking the wheel top and bottom there should not be any tilting of wheel ? also make sure the wheel is free to rotate with no noise /roughness if so ? then you have a front wheel bearing failing however whilstyou check drivers side? also check the other wheel for same and it would be a good idea to check brake pads for wear during checks as you can do these if/when it becomes apparent the wheel bearing req's attention? all the above is subject to assuming you have checked tyres and pressures are correct ? you could pop car into local tyre depot and they could do checks on above for a quick diagnosis? hope this help check it out ASAP as this could be serious best wishes

Nov 12, 2008 | 1997 Hyundai Accent

Not finding what you are looking for?
1997 Hyundai Accent Logo

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...