Question about 1990 Toyota Celica

3 Answers

1990 gt4 fails to start have tried jump starting but engine still fails to turn over

Posted by on

  • yakubu12 Sep 29, 2008

    i have the same problem with starting my toyota celica 1991,

    as soon as i turn the keys on the lights on the dash board appears normaly,but just wouldnt make any attempt to start,so.. mute just without any form of click or any noise,

    i wish u can advice me on any procedures,

    thanks

×

3 Answers

Ive got 1 4 sale burgundy col rims lowered 3icnh xhaust 4rm turbo turbo timer 6200 neg

Posted on Oct 21, 2008

Ive got 1 4 sale

Posted on Oct 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,122 Answers

Hi tracysteve,

First thing to check...Does the engine turn at all?....is the coolant level correct....and the engine oil?.... If all that's OK....take a spanner and put it on the crank shaft center bolts (middle of the pulley) and try to rotate the engine..... Once you've confirmed that it turns.....remove the battery terminals and clean them....Also have the battery checked.... Still no joy?.... Is there a clicking sound when you try to start? If the answers yes.....You probably have a problem with the starter motor....Check the connections to the starter and also the starter relay.....

Let me know how you get on?

Regards Johngee10

Posted on Sep 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CAR won't start when it's hot


Check the Fuel Pump Relay. behind the battery next to the OVP Over Voltage Protection Relay. They do fail. Occasionally the engine will not start when hot. This becomes more frequent until you are left stranded. If you are comfortable with jumping two terminals you can jump terminals 7 & 8 test the relay. if the car starts your Fuel pump relay is bad.

Jan 20, 2014 | 1990 Mercedes-Benz E-Class

1 Answer

Car having prob starting, having to jump start it. Got an ignition unit but it was not that. When driving my 17yr old celica gt4 it feels like it is losing power


There are lots of issues that might relate to the engine not firing and must be checked. So start by checking on the fuel, the fuel filter, the fuel delivery.
next check on the firing , the HT coils the spark intensity. Check the coils and the timing of the spark.
Please check the following tips:

http://www.fixya.com/cars/r5843031-tips_check_car_not_start

Jul 16, 2011 | Toyota Celica Cars & Trucks

2 Answers

The Buick's engine does not crank when I try to start it. There is a clicking sound when I try to start it, but the engine doesn't turn over. What Do You Think?


The starter is bad or the battery is dead. If the battery is fully charged then the starter needs replaced. The solenoid inside of it is clicking

Oct 16, 2010 | Buick Century Cars & Trucks

1 Answer

1990 Eclipse 1.8L. Fully chargered battery. all


It is very possible the "starter Solenoid" has failed within the starter. If this is the case the starter will do little or nothing. Also check connections at starter, lose cable? You should be able to jump across the starter to see if it works; if nothing then you know it is the starter. Oh yea, if it has an automatic tranny it may be the Neutral Saftey switch failed or out of adjustment; try wigglying around the gear shifter or try starting in neutral.

I hope this may have assisted you,
Tom

May 07, 2010 | 1990 Mitsubishi Eclipse

1 Answer

Need a serpentine belt digram for a celica gt4 1990


Click on the following direct, Free Link. It has the Drive Belt Diagrams for your 1990 Toyota Celica depending on your Engine Options. It has several other Diagrams that will be very helpful for you.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/1990/make/toyota/model/celica/1990_toyota_celica_drive_belt_routing_diagram.htm

Apr 13, 2010 | 1990 Toyota Celica

1 Answer

1990 toyota pickup with 22re engine and 235000 miles failed smog in cali.,not because of emissions but because timing was at 30 degrees instead of 10. It starts and runs well. I have not adjusted timing ....


Reset the engine timing by first jumping pins E1 and Te1 in the grey box under the hood. If the truck runs poorly set to proper timing, your timing chain has jumped a tooth. Does it rattle bad at idle? Id so, the guides are worn out, and the chain is stretched.

Oct 17, 2009 | 1990 Toyota Pickup

2 Answers

90 celica gt4


check cam sensor

Jul 22, 2009 | 1990 Toyota Celica

Not finding what you are looking for?
1990 Toyota Celica Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...