Question about 1994 Land Rover Defender

2 Answers

Td5 injector height - 1994 Land Rover Defender

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 89 Answers

Fuel injectors on TD5 are adjustable.Turn the engine over while noting the camshaft position.There are marks behind the cam chain sprocket 1 - 5.With each line next to the number set in the middle of the cam box hole. Adjust the injector stop screw fully in (clockwise),turn the stop screw one full turn out 360 degrees and lock the nut there.Do this with all the injectors in turn with the injector coinciding with the number on the cam shaft.

Posted on Nov 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Land Rover Master
  • 2,122 Answers

Hi Shephardfox,

Your question is a little ambiguous.

The injectors for the TD5 are sold and replaced in coded sets...The codes are not interchangeable.... i believe that they have to be replaced as a set....

hope that this info is of help to you

Regards Johngee10

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get engine timing marks of landrover td5


http://www.discovery2.co.uk/Injector%20Seals.html

Apr 19, 2015 | Land Rover Cars & Trucks

1 Answer

Misfire on td5


injector harness that runs through valve cover to ecu needs replacing

Dec 25, 2013 | 2004 Land Rover Discovery

1 Answer

Blue smoke on tickover


Depends which engine you have V8? Tdi? TD5?

Mar 29, 2013 | Land Rover Discovery Cars & Trucks

1 Answer

Disco 2 wont start


,slacken the injector pipes off then assistant cranks engine with throttle wide open ,as you see fuel start to appear at an injector tighten the nut ,as soon as you have about 2 or more bled out it will fire .easy to do

Jul 21, 2010 | 2001 Land Rover Discovery Series II

1 Answer

1999 TD5 series 3 discovery just had new front springs and rear height sensors fitted. Now self leveling warning light on and suspension over inflated and wont come down. Help !


Have you had the truck setup on the computer since the new front springs? It may need levelling off manually via the computer to adjust the height.

Feb 25, 2010 | 1996 Land Rover Discovery

1 Answer

Td5 seems to be miss firing or firing on four


Probably more likely to be oil in the injector loom. About £35 for the part and an hour or so to replace.
Easy way to check, get the ECU out from under the bonnet by the jack, unplug IIRC the red plug and see if there's oil oozing there. If there is, get some contact cleaner and clean that up, but odds are the upper loom has a failed o-ring. This can be replaced then cleaning the lower loom at the ecu a couple of times a week can clear the rest out negating the need for a engine loom replacement.

Dec 14, 2009 | 2000 Land Rover Discovery

1 Answer

Where are the fuel injectors on the td5


In the cylinder head adjacent to the camshaft with the nozzle of each injector protruding directly into the cylinder.

Oct 31, 2009 | 2001 Land Rover Discovery Series II

1 Answer

How to adjust rocker shaft on discovery td5


There are adjustment screws on the rockets according to RAVE.
The procedure is as follows:
1) Rotate the engine clockwise until No 1 injector lobe is at full lift.
2) Rotate rocker adjusting screw clockwise until the injector plunger is felt to bottom out.
3) Rotate rocket adjusting screw anti-clockwise one complete turn to give plunger the required bump clearance and tighten rocker arm adjusting screw locknut to 16Nm. Ensure the screw does not turn as the locknut is tightened.
4) Carry out the procedure for the remaining 4 rocker arms.
5) After completion of rocker arm adjustment slowly rotate engine clockwise 2 complete turns by hand to ensure that no injectors are bottoming out on their plungers.

Apr 08, 2009 | 2003 Land Rover Discovery

1 Answer

Daily misfire under load


check fuel line, fuel filter, fuel pump, injectorpump,injectors, engine oil may have entered to injectors wire.

Nov 23, 2008 | 1998 Land Rover Discovery

Not finding what you are looking for?
1994 Land Rover Defender Logo

Related Topics:

1,452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...