Question about 1992 Buick LeSabre

1 Answer

1992 Buick Lesabre trouble codes

Hello, my neighbors have been having problems with their car and they replaced a sensor (that I do not remember the name to, sorry) and got the car to work again. Well on a small trip this morning on their way home the car just died on them. I stopped over this morning with a sensor device made by GM that a friend let me borrow for my car which also has the famous "service engine soon" light

After running the program I got a few trouble codes:
12, 13, 23, 31, 41, 58, 62.

and I know code 12 just means the diagnosis code is working but am unsure of the rest of the codes. Could I get a hand on this please because I can not find anything on the net.

Thanks in advance!

Posted by on

  • tyanke Sep 26, 2008

    I thank you!
    Just what I was looking for!

    I actually found something but I didn't like the website much..this one is definitely better


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Buick Master
  • 60,769 Answers

Click on the link below for a full list of trouble codes.


http://www.gmtuners.com/OBD1_DTC.htm

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 bulb on the middle console wont light when in 4 wheel. changed the bulb and nothing. checked the connector with a meter and get .3 power when in 4 wheel any way to fix the light to work?


had the same thing with my 97 dakota .it turned out to be a tranny sensor , i am sorry i dont remember the name of it, but it was located on the top of the tranny .if i remember it was about 25 to 35 dollars .pretty easy install

Sep 26, 2013 | 1997 Dodge Dakota

1 Answer

What does the p2173 code mean??


well i dont where you got the codes but they do not match up with the generic codes and not the hyundai codes
P0173 Fuel Trim Malfunction (Bank 2) -Malfunction

P0106 (MAP) Manifold Absolute Pressure/(BARO) Barometric Pressure Sensor -Circuit
Range/Performance Problem

P0195 Engine Oil Temperature Sensor Circuit Malfunction
sounds like you could have a breather pipe from the engine to the inlet manifold playing up from them codes ,now remember i have never seen a petrol version of this vehicle only ever a diesel here in spain so i have no idea where to you to look first sorry

Feb 14, 2012 | 2007 Hyundai Santa Fe Limited

1 Answer

Hello Ted, I have a 1996 Toyota Corolla that was/is overheating. I changed the thermostat, replaced the coolant and also replaced the radiator fan relay because the radiator fan was not turning on. The car...


temperature switch. The temperature switch finishes the circuit for the cooling fan. Once the engine reaches the specified optimal temp. the switch completes the circuit and turns the cooling fan on. Hope this helps

Jun 08, 2011 | 1996 Toyota Corolla

1 Answer

We have been having horrible gas mileage but the other day All of a sudden the car hesitates, sputters and dies when trying to go into gear.. I was thinking the fuel pump? I have to replace the o2 sensor,...


You replace nothing

You learn how sensors work & how to test
them

They only get replaced when they fail a test

O2 Sensors get replaced at 100,000 miles or
when they fail before that mileage.

Your best to let a repair shop diagnose & solve your
problems. It will be cheaper than throwing parts at it

May 23, 2011 | Toyota Paseo Cars & Trucks

1 Answer

I have a 2005 Kia Spectra( Manual) and it has been an excellent vehicle ( except it goes through clutches eery 2 years) and recently the car alarm started to go off for no reason. How do I fix this so my...


May have a faulty motion sensor, try reprogramming the alarm. also a week battery will turn the alarm on when the charge drops and goes back up, take it to an Auto Zone or Kragin type auto parts store for a free charging system check. Your clutch problem may be due to after market parts (just not the same) but I would check that the fly wheel is not turned past the specs, may have to replace with next clutch job. also remember to keep your foot off the peddle when driving, the slightest pressure will drag the clutch.

Sep 25, 2010 | 2004 Kia Spectra

2 Answers

My check engine light is on. I have replaced the


can be alot of things need to have car put on a scanner to get a trouble code and then you will know where to start Advance auto parts or Autozone will do that for free if you have one around you

Mar 24, 2010 | 2003 Mitsubishi Montero Sport

2 Answers

1995 nissan pathfinder starter will only click after several tries will finaly ingageput new starter same problem new pos and neg cable same problem any ideals


Take it to the dealer. I had the same thing with my 1994 pathfinder. There's something else
wrong and they found it, replaced it and I've not had any problem. It was an easy problem for
them to solve. I'm sorry I can't remember the name of the part they replaced. If I find the name I will
email it. to you.

Aug 17, 2008 | 1994 Nissan Pathfinder

1 Answer

Ignition key switch sensor


hello, i am sorry to tell you that you have to replace the hole entire steering column to get rid of this problem , all i can advise you with is to try to find the sheapest price , and thank you for using fixya

Jun 26, 2008 | 2000 Toyota Sienna

Not finding what you are looking for?
1992 Buick LeSabre Logo

2,277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...