My Mazda 6 Sport has xeon headlights, after having the headlight switching off problem rectified under warranty, the car has now developed another headlight fault.
Normally when the headlights are switched on the beam moves (beam moves up and then down) this is best observed when facing a wall or similar.
My vehicle now moves the beams down and then back up the outcome is that the beam is higher than normal and therefore dazzling to oncoming traffic.
Does anyone have the same problem or can issue a fix, prior to me taking it to the main dealer.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Jan 1, 2011 - Uploaded by justhes
Explorer Headlight Problem and Interior Stuff ... Thank's to your movie I fix my car. .... 2001 Ford F150 Headlight Switch Replacement - Duration: 5:05. Jon Olson 10,273 views. 5:05. 2003 Ford F-150 4X4 Repair Part #3 The GEM Module ... EXCLUSIVE: 2016 Ford Explorer Sport with Mark Mills at Athens ...
Sep 16, 2013 - Uploaded by Go-Parts
Replace 2001-2005 Ford Explorer Headlight / Bulb, How to Change Install ... How To Install Replace Headlight Ford Explorer Sport Trac 01-05 ...
May 11, 2010 - Uploaded by 1A Auto Parts
How To Install Replace Headlight Ford Explorer Sport Trac 01-05 1AAuto.com .... I did this on my wifes 2003 Explorer only difference was the screw was a ... Replace 2001-2005 Ford Explorer Headlight / Bulb, How to Change ...
Mar 1, 2014 - Uploaded by Jon Olson
Headlamp Switch was purchased through Auto Parts Warehouse: ... to help me with my 2001 Ford Explorer Sport-HeadlightSwitch, but the .... Ford F150 Explorer 2000 2001 2002 Overhead Console Repair - Duration: 6:38.
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...
Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?
There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module
The headlights are not fused, you likely have a switch problem. Pull the headlight switch out and check for burnt wires at the connector hard shell. If problems are found replace the headlight switch and the connector. The repair connector is available from local suppliers the headlight switch is also, both are fairly cheap parts to buy.
Open the hood and look on the back of the headlight fixture for a large plastic nut... This is the retaining ring that holds your headlight bulb in the fixture. If by ' problem with my headlight shining' you mean your headlight no longer works , you can use the above to replace the bulb and that should solve the issue. HOWEVER , if by ' problem with my headlight shining' you mean that the light is not aimed properly , you will need different instruction on how to solve the problem.
I had the same Problem on My Mazda 6 Sport. If you turn the lights off then back on the light comes back on.The main dealer eventually changed the headlight, after being instructed by Mazda that there was a common fault within the sealed unit.
My advise is to take it back to the dealer, and tell them mazda have nbeen changing them under warranty.
Notice how your headlights are protected under the hood by a suspiciously large rubber cover? Miatas hate humidity and condensation, from head to toe, including the headlights. I lost a headlight, was pulled over by a state trooper who told me to change it, and tested the brights all in one night. Of course, the brights worked, because they are actuated from a different circuit on the wiring harness that connects to the headlight through that massive rubber seal. If any amount of humidity or condensation has occurred, especially during a weather change, I cannot stress that enough, the first thing to fail is the normal headlight setting. I was already going to switch over to high-intensity bulbs, so I had a good excuse to crack open the headlight assembly (otherwise I wouldn't dare--Miata headlights are nearly impossible to change with a large pair of hands). I separated the old bulbs from their wires and proceeded to clean the connectors of the wires with an approved electrical connection cleaning solution (go to AutoZone). I then applied the conducting gel to the bulb to avoid corrosion and secure against future problems with condensation and was good to go. Make sure to give yourself many many hours to decipher the bulb assembly, as it was designed by someone whose sole intent is to make the job 150 times more difficult. Otherwise, cleaning the wiring assembly is a cinch.