Question about 2002 Jeep Liberty

1 Answer

Jeep liberty my jeep liberty has a metal on metal grinding noise coming from the tires and brake areas. any solutions?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 37 Answers

Brake change?

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grinding While Braking


it looks like brake worn ..remove tires to see brake pad

Mar 25, 2014 | Chevrolet Tahoe Cars & Trucks

2 Answers

When coming to a stop after going at least 20 mph or so once you apply the brake the longer you hold it is when it will happen. you will hear grinding noises and then the brake light comes on and the...


whos checking your brakes? you need to have them checked by a ASE brake certified mechanic and you will never have that problem.
Also have them check the wheel bearings, could be dry and going away will also cause the grinding sound but that wont set the brake light on... take it to a reputable shop and they will find your problem.

Dec 05, 2013 | Cars & Trucks

2 Answers

2007 jeep liberty metal on metal loud grinding noice coming from rear end when brakes are pressed. I also think that its starting to happen when driving also but don't know if I am being paranoid on that....


Sounds like you need brakes or there is a rock stuck in between the caliper and backing plate.

Seel Immediate repairs before you loose your brakes alltogether.

Oct 23, 2013 | 2007 Jeep Liberty Sport

1 Answer

MY JEEP SHAKES WHEN I'M STOPPING OR SLOWING DOWN. IT ALSO TENDS TO SHAKE WHEN I'M ON THE FREEWAY GOING OVER 50. WHAT DO YOU THINK IS CAUSING THIS? THANKS,


Four things to check; tires, shocks/struts, differential, and breaks.

tires: check to see all the tires are balanced and at the proper pressure

differential: if you are hearing a grinding sound and there is oil dripping from the rear or front differentials you should et them reaired

shocks/struts: push down on the bumpers if you are able to bottom out the susspension then you need to replace the shocks/struts

breaks: if your breaks are squeaking or you hear metal grinding then you may need to replace the brakes

the differential would be your most likely candidate for the problem the way you have described this problem, but don't rule out the others because it may be a combination of the problems.

Jun 29, 2011 | 2005 Jeep Liberty

5 Answers

When i press on brakes i can hear a grinding noise coming from he front end, what could it be?


Brake pads are worn. That noise is the sound of the backing plate for the brake pads hitting the rotors. You will need to replace the pads and probablt the rotors. When the brakes go metal to metal like that it typically destroys the rotor.

Feb 21, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Grinding noise


your front brake pads may be metal to metal (worn out) or there is a small rock stuck in the rotor area, onluy way to know is pull the front wheels off and inspect the brake pads and the rotors

Mar 23, 2010 | 2000 Suzuki Grand Vitara

1 Answer

Front end noise when turning. almost sounds like


There are a couple of things to cause metallic sounds when turning. First thing, is if it's a clicking sound when you turn, then you have a cv joint going bad. It's usually more prominent when moving in reverse, however it can happen just as well while moving forewards. Secondly, if it's more of a grinding or scraping noise, we have a couple of options. The sound could be coming from the brakes, if they're worn or have grit stuck in them, or it could be bad bearings in the front wheel hub. The wheel hub has a tendency to making a whining noise when driving; usually most easily heard when driving past buildings. They can also allow the tire/wheel to present the appearance of leaning when looking at it. If bad enough, it can even rub on the brake caliper, or cause the disc brake rotor to wear out the brake pads prematurely. So, to recap: Check:
CV joints, if a clicking sound brakes or wheel hub bearings if grinding or whining sound.

Oct 19, 2009 | 2000 Jeep Cherokee

1 Answer

05 wrangler grinding/screeching


it could be your brakes , on most brakes there is a wear tab that makes a high pitched squeeling noise when it contacts the rotor. this is in place to let you know your brakes are due for replacement. if it is not your brakes then it could be a wheel bearing.

Sep 01, 2009 | 2005 Jeep Wrangler

1 Answer

How to test if bearings need replaced 2005 jeep liberty


Was the Rotors turned on the last front brake Service?....Sounds like uneven rotors in front

Jun 09, 2009 | 2005 Jeep Liberty

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...