Question about 2004 Pontiac Grand Am

2 Answers

Cruise control works fine as long as you hold the on/off button in. The light comes on but as soon as you release the button, the cruise kicks off. Looks like a switch problem. Does anyone have an idea? mc

Posted by on

  • Anonymous Oct 23, 2008

    I have the same problem. if i hold the button in it works fine. if i hit the brakes while holding the on off button in it still turns off the cruise. still trying to find the problem. but not the brake switch on this one.

×

2 Answers

That happened to me too. Is your cruise button underneath the airbag? I had to get a new switch.

Posted on Oct 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 479 Answers

I really think the problem will be in the module under the hood, but I would check all the fuses first.
There is also the possibility the brake light switch is causing the problem.

One other spot to check, is make sure the stop lights in the back window are not burned out

Posted on Sep 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 isuzu rodeo and when I'm driving


Cruise should not come on without the cruise button activate, but cruise should cancel out as soon as you step on the brakes.

Jun 06, 2012 | 2000 Isuzu Rodeo

2 Answers

How to fix cruise control


Cruise controls can cease to engage if the clutch or brake light cruise switch are out of adjustment. If this happens, try placing you foot under the clutch pedal (if equipped) and lift up on it (toward you) and hold it while engaging the cruise. If it now works, it will likely cut out when you remove your foot from under the pedal. Check the brake pedal in an identical fashion. Adjusting the switch at the pedals can often solve he problem. Some vehicles (Honda, Acura, Ford, to name a few) have a plastic insert that mounts in the pedal arm which presses against the switch. These can become brittle and fracture into pieces. My Acura has little pieces of blue plastic on the floorboard around the brake pedal one afternoon and I noticed the cruise didn't work. It was the pieces of the insert that had come to pieces preventing the cruise from coming on. I replaced the insert and no more problem with the cruise.

Mar 10, 2012 | 2003 GMC Sierra 2500HD

1 Answer

This problem is on a 1998 740iL. When I press the steering wheel cruise control activator - the green indicator light comes on but when I press the "set" (+) button it does not engage and the car does not...


my BMW 740i has a problem with the cruise control.
The cruise control will work for about 20 miles and then quit working and will not work again.

May 17, 2010 | Cars & Trucks

2 Answers

I own a 2005 GMC Canyon Five CYL and the cruise control stopped working last niight. You push the button and no cruise. I checked the fuse and it is ok I exchanged with another 10AMP and no change still...


Start with the simple and check the fuses and the Stop lamp switch. Check your brake lights, if they're not working, the cruise won't work either. If they're not working, check the fuse for them, if the fuse is fine, then take it into the dealer, there's been a recall issued on the brake switch, so it should get fixed for free.
Cruise Control Disengaged
The powertrain control module (PCM) disengages the cruise control operation based on the signals from the following switches:

* The stop lamp switch
* The TCC brake/cruise release switch
* The clutch release switch, if equipped
* The cruise control On/Off switch

The TCC brake/cruise release switch and the stop lamp switch are mounted on the brake pedal bracket. When the brake pedal is applied, the normally closed TCC brake/cruise release switch opens and the normally open stop lamp switch closes. The PCM detects a low signal voltage on the TCC brake/cruise release switch signal circuit and a high signal voltage on the stop lamp switch signal circuit. When the clutch pedal is applied, the normally closed clutch release switch opens and the PCM detects zero voltage on the CCP switch signal circuit. The vehicle speed stored in the memory of the PCM will be erased when the cruise control On/Off button is turned OFF, or the ignition switch is turned OFF.

The Cruise Control System will disengage when the PCM detects that a driver override function has been active for approximately 60 seconds .

When the Cruise Control System is disengaged, the PCM sends a class 2 message to the instrument panel cluster (IPC) in order to deactivate the cruise control indicator.

Cruise Control Inhibited
The powertrain control module (PCM) inhibits the cruise control operation when any of the following conditions exist:

* A cruise control related DTC has been set.
* The vehicle speed is less than 40.2 km/h (25 mph) .
* The vehicle is in PARK, REVERSE, NEUTRAL, or 1st gear.
* The engine RPM is too low.
* The engine RPM is too high, with fuel cut off.
* The vehicle speed is too high, with fuel cut off.
* The system voltage is not between 9 volts and 16 volts .
* The Traction Control System (TCS) is active for more than 2 seconds .

Thank you for using Fixya and start with replacing the stop lamp switch. Even though the brake light work, it;s been known for that switch to cause your issue. that's way there was a recall for it.

Apr 01, 2010 | 2005 GMC Canyon

1 Answer

MY 2004 SUBARU FORESTER XT CRUISE LIGHT KEEPS FLASHING AND CHECK ENGINE LIGHT COMES ON AT THE SAME TIME


if te check engine light is on the cruise wont work it just flashes if you erase check engine light and cruise still flashes hit cruise button twice it will go out but if engine kicks the check engine light it will flash again you have to fix what ever it is that kicks check engine light or you just deal with it

Mar 17, 2010 | 2004 Subaru Forester

1 Answer

Cruise light turns on but set light does not


Sure enough babe! Often the problem is in the CONTROL BUTTONS (those on the steering wheel)... Yet again, I've see the problem point to the Cruise Control Module (Under the hood). Since you mentioned the 'CRUISE' light comes ON, but nothing else is working, I'd hazard a guess the control buttons are malfunctioning. If you press them REAL HARD, do they work? Otherwise, Take the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).

Jun 13, 2009 | 2006 Hyundai Santa Fe

1 Answer

Cruise Control on 2001 Dodge Stratus SE stopped working. The green light comes on but it won't work. The fuse isn't labeled in either of the fuse boxes to see if that is the problem and I didn't get the...


Have you recently had any brake work done? I had a 05' freestyle that did the same thing.. when you tap the brake the cruise kicks off right? so if your brake pedal is sticking or not returning fully to the up position, the cruise will immediately kick off like you applied the brake. Check to see if your brake lights are staying on when you release the brake. Let me know what happens, please and good luck.

May 31, 2009 | 2000 Dodge Stratus

1 Answer

Cruise control on 2001 Lincoln Towncar


Try pulling the brake pedal up with your toe and setting the cruise control while you hold it up with your toe. If it engages, stop holding the brake pedal up. It will either disengage immediately or after you hit a bump. Or if you step on the brake, of course.

There's a brake pedal sensor button on the steering column right where the brake pedal arm intersects it. I put a self]adhesive felt pad (buy at wal-mart, home depot, etc) on the pedal arm where it makes contact with the sensor button. Fixed. Been working fine for a year now.

Gene C

Jun 30, 2008 | 2001 Lincoln Town Car

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...