Question about 1995 Chevrolet Camaro

1 Answer

Online wireing digram

Have big block 427 motor in jet boat need to find digram to finish wireing thanks jeff

Posted by on

  • Ronald Mueller
    Ronald Mueller May 11, 2010

    I need to know exactly what you require as far schematics and diagrams



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers


Appreciate the direct "Ask Me".

I have very limited exposure to 427s since they are not that readily available in my country. At most that I have worked on (longtime before) are the rat motors with dual (2 barrel) carbs and uses conventional (then) contact points which if you are using, I could very well prepare a wiring diagram. If however, you have a highly modified later day version with EFIs and multi sensor, then I am afraid I would be at a lost and would be of no help to you.

I have taken the liberty of asking the assistance of other members of the community to assist you further if not better.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Sep 25, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need to know what size v8 gm motor is

There is a pad on the engine passenger side by timing cover sticks out where head meets the block On that pad will be letters and numbers write them down ad you will be able to check in a GOOD shop manual it will tell you what you have. If it is original it is either a 350 or 427

Mar 04, 2014 | 1981 Chevrolet Corvette

1 Answer

427 runs hot

What size stat do you have in the car as 220 is not a high temp most small blocks will run 220 to 235. I guess you could change the stat it might be sticking some. The other thing to look for is does the system have an air lock, is it knocking when at operating temp. What temp is the fans kicking on at, they maybe turning on late. Hope this helps.

Apr 24, 2017 | 1973 Chevrolet Corvette

2 Answers

Need ignition wiring diagram for 1997 Saturn 4 door automatic. About to install a remote starter for the winter months

I think these are the 2 diagrams you need, but they aren't that useful in this form. I recommend you post a request at the bottom of the following site to get a better answer:


Oct 13, 2010 | 1997 Saturn SL

2 Answers

Whats the firing oder for a chevy big block 572 crate motor

If it follows the normal big block chevy order, it is: 1-8-4-3-6-5-7-2


Hope helps (remember rated this).

Jul 13, 2010 | 1993 Chevrolet Caprice

1 Answer

Just got replica ac cobra 5.7L 350 big block

5.7l 350 isn't a big block (i believe) this is a small block - still nice motor though.

As for oil, Cobra guys on would say Valvoline Vr1 20w/50 mineral oil


May 09, 2010 | Chevrolet Classic Cars & Trucks

2 Answers

Im installing a new stereo and need a wireing digram

Hi there,

You'll need to determine which of these connectors match yours, then follow the appropriate diagrams:

Nissan Audio Wiring - 1985 to 1994:


Nissan Audio Wiring - 1995 onwards:


Let me know how you get on...



Nov 12, 2009 | 1994 Nissan Pathfinder

1 Answer

Can't get transmission in car

They did come with big blocks in and around that year, so it should go. What are the motor mounts out of? Perhaps a trip to autoparts store to look at & compare mounts for a 454 might be an idea. You can't even get tranny up to back of engine? Maybe angle of engine not quite right yet? Mounts loose to allow movement? May be different cross member too.

May 03, 2009 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

A hand pls?

Are you still in need of help?
RPM Northwest

Sep 25, 2008 | 1983 Chevrolet Camaro

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides