- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I do not have a video but I am sure you can find one on YouTube. Fuel pump is dropped into the fuel take from above. You will have to drain the tank and unbolt the straps holding the tank up. Drop it down and the pump is pretty easy to get out and replace. The work is in getting the gas tank off.
Drop the tank. While you have the tank off and the pump out inspect the inside of the tank for contaminants like dirt, varnish, and even water. A clean tank means a happy pump. It's always a good idea to replace the fuel filter when you replace the fuel pump.
Hello natasha_fred: My name is Roger ans I will answer for you. Yes there is only one fuel pump. The fuel pump is located in the fuel tank. You must drop the tank in order to replace the fuel pump Assembly. Should you need further help just ask. Please rate the answer you received Thank You for using Fix Ya. Roger
A 1996 Bronco fuel pump is in the tank. The tank will have to be dropped. After that, it's quick & easy. The filter is on the rail, not so easy even with the line removal tools. Wear safety glasses in case of any pressure.
yes it's in the fuel tank....................Drop the tank and the rest is easy.
Getting the Gas out before dropping the tank can prove to be a pain
but after that is done the rest is easy.(best to run it a empty as possible) Two straps hang the tank.
Remove the strap bolts and the tank will come undone. Remove the filler
hoses, disconnect the power leads and the fuel lines and the tank is
free. The pump comes out by twisting a ring.then remove the pump and replace then reverse the earlier steps to reinstall