Question about 2000 Ford F250 Super Duty Crew Cabs

3 Answers

Just cuts of and stalls.

While driving once it warms up the truck just shuts off similiar to turning the ignition switch off. all dash lights then come on as if turned to accessory. i have changed the ignition switch with no such luck. when it stalls everything flicks off then on almost as a power surge. im about to replace the pcm. thats what the dealership tells me is wrong. any ideas?

Posted by on

  • 2 more comments 
  • fe_tech53 Sep 25, 2008

    5.4L v8 i was told its the PCM however i cannot find it anywhere in the truck have basically tore the interior apart trying to locate it. anyone know where it is at or have a picture of it?

  • fe_tech53 Oct 17, 2008

    isnt the cps recall only for the desiel motors?????

  • fe_tech53 Oct 20, 2008

    ok so if the cps is only for diesels then would my best bet just be replacing the computer. when i took it to the dealer it took 7 days to get back just from having them look at it. but the way it seemed was that they are just guessing. because they said the computer comes back with codes. just not saying anything is wrong. they did a bunch of tests not sure exactly what but they said that everything checks good. that is how they came to the conclusion that its the pcm thats bad?

  • jaybloom33 Mar 31, 2009

    2003 f150 5.4 v8 just stalls while driving, mostly on damp days. when try to restart the theft light flashes and odometer shows dashes. Also, when it first starts to stall while driving it feels like it is jumping out of gear and the gauges spin all the way to the end.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Your CPS is shot.. Camshaft Position Sensor.. Ford Recalled the sensor because it was fautly. 1 10mm bolt on the bracket, one plug and your on your way.

Posted on Oct 16, 2008

It will start right back up but then it just shuts back off.. and no the check engine light is not on and the pcm is coming back with no codes.

Posted on Sep 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

What engine is in it

Posted on Sep 25, 2008

  • 1 more comment 
  • hbonz50 Sep 26, 2008

    do you have a power programmer installed

  • hbonz50 Sep 27, 2008

    does the truck start up right away after it stalls,and is the check engine light on ?

  • hbonz50 Oct 18, 2008

    yes the cps is only for diesels

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could bad maf sensor and bad idle air valve have vehicle stall then hard to start for awhile and cuts off after 10 minutes of driving


I would also suspect the ignition module. They tend to work ok for a few minutes when they are cold, then fail once they warm up. If you wait awhile for the ICM to cool down, it will work as well as it can until it warms up again. A code scanner is your best friend to know where to start looking, and to perform tests and log data.

Feb 16, 2016 | 1997 GMC Yukon

1 Answer

What causes engine to ABRUPTLY shut off while driving ?


2004 Ford Explorer Engine Stalls/Cuts Out While Driving: 31 ...

www.carcomplaints.com/Ford/Explorer/.../engine/engine_stalls_cuts_out...
... 2013 · 2012 · 2011 · 2010 · 2009 · 2008 · 2007 · 2006 · 2005 · 2003 · 2002 · 2001 · 2000 ... 2004 Ford Explorer engine problems: engine stalls/cuts out while driving ...to overheat and slide out of its socket, causing the engine to shut off. ..... Suddenlyat 30-35mph, my engine just died and i cannot control the steering wheel.

2005 Ford Escape Engine Shutdown While Driving: 24 ...

www.carcomplaints.com/Ford/.../engine/engine_shutdown_while_drivin...
The 2005 Ford Escape has 24 complaints for engine shutdown while driving. ...January 22: Ford Ranger Driver Killed by Takata Airbag in South Carolina news ' 2 days ago; Ford Focus Door Latch ..... I was 80 miles from home when the engine shut off. .... No one could seem to determine the true cause of the problems.

Ford Ranger Stalling/Dying Problems - Edmunds.com

forums.edmunds.com > Ford > Ford Ranger

Nov 2, 2007 - 31 posts - ‎21 authors
Learn more about Ford Ranger at the Edmunds.com Car Forums! ... cut off a couple of times then it started happening more frequent while driving. ..... the other day I was driving down the highway and it just shut off, no warning .... 2000. when it gets overheated the circuit shorts and causes the engine to die. Ford Expedition engine cutting off while driving
31 posts
Oct 24, 2009
Mercury Mountaineer Start Stall Idle Problems
31 posts
Oct 1, 2007
More results from forums.edmunds.com

Jan 27, 2016 | 2003 Ford Ranger Regular Cab

2 Answers

How do I keep my car on?


There are many things that can cause the vehicle to stall/not start. The 2 most common are lack of fuel and lack of spark. Possible fuel pump issue or relay/wiring to fuel pump. This can be checked/ruled out by performing a fuel pressure test. Another common issue with this vehicle for stalling/no start is a crankshaft position sensor that will cause an ignition spark failure. Have the codes scanned as this sensor will usually set/store a code before you throw any more parts at it

Dec 19, 2015 | 1999 Nissan Maxima

1 Answer

Acura mdx fuse box


When you say completely shuts off, do you mean all the lights go out and the gauges die? Or does the engine just randomly stall. It could be the PGMFI relay (which runs the fuel system) or the ignition switch. The PGM FI relay is electronic, and hard to verify that it is faulty if it is working during testing. I take a hair drier and warm it up, and see if it fails when it starts to get hot. It's under the dash, to the right of the steering column on the Accords I've worked on (should be the same wiring)

Mar 12, 2014 | Cars & Trucks

1 Answer

My daughters hand me down 1995 olds cutlass ciera has 103,000 miles. It was grandmas and well maintained. It has started shutting off while driving. No rhyme or reason....


One possibly/likely problem is that the ignition circuit is cutting out. I had this same issue on a car (malibu) and found it was an intermittent ignition switch connection. Replacing the ignition switch fixed it for good.
One thing that will really help you is to notice you dash lights when this happens. If the dash lights go out when the car stops, then this is it. If the dash lights (ignition) stay on, then you have another issue.

Nov 21, 2010 | 1995 Oldsmobile Cutlass Ciera

2 Answers

2001 chevy express van 3500 while driving security light comes on dash then engine shuts down , once pulled off the road it will start back up.. did this 3 times on hour drive.. feels like gas pedal just...


You need to get the codes from the theft deterrent module.Usually a B2960.This will help in the diagnosis of the problem.Hope this helps.Good luck.

Apr 07, 2010 | 2001 Chevrolet Express

3 Answers

I have a ford taurus wagon. It starts once a day!


check your distributor and cables connected to tansmission

Dec 01, 2009 | 1987 Ford Taurus

1 Answer

1996 aurora shuts off while driving w/o notice drives well have replaced lots of things this action occurs every few minutes


You need to get more information, but one possibility is that the fuel pump stops pumping. THis would result in a stall, but you dash lights would still be on. If, when this occurs, the dash lights go out, then we need to look in the area of the ignition circuits - ignition switch, etc.

Oct 26, 2009 | 1995 Oldsmobile Aurora

1 Answer

How can i bypas passlock 2


You can bypass the passlock by cutting a yellow wire that goes to the top of the ignition switch. To do this take out the radio and look for 3 small wires that run together to the top of the switch. they are much smaller than the rest of the wires in the switch. Start the car and while it is running, cut the yellow wire. Once it is cut you will get a theft light on the dash. You can't get rid of the light. You can shut the car off once it is cut. Then tie in a toggle switch to the yellow wire and mount it under the dash. This is in case you need to reactivate the passlock. Such as if you disconnect the battery. You can also find more info out on the internet on how to do this.

Jun 08, 2009 | 1998 Chevrolet Malibu

4 Answers

1998 Honda Accord stalls intermittently


There was a recall related to this a few years ago. I know because my engine began shutting off on the interstate and other driving situations. You may be able to search for the recall or just take it in to a Honda dealership and tell them that you received a recall notice related to your ignition switch a while back and your car has been stalling out while driving. I believe a replacement of the ignition switch will fix your problem. I haven't had any problems since. The dealership shouldn't charge you anything for the repair.

Nov 28, 2008 | 1998 Honda Accord

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...