Question about 1988 Mazda B2200

1 Answer

Mazda b2200 compression specs

Does anyone know what the cylinder compression specs are for my 1988 b2200 f2 engine? 4cyl..my truck was overheating severly but was not leaking water. i did a compression check on all four cylinders (110 90 90 100) didnt seem to see a blown head gasket in the numbers. found out my radiator was clogged but id like to know what my compression is supposed to be specifically...and its not in the chiltons HELp!

Posted by on

  • silocybinaut Sep 24, 2008

    thanx

  • Anonymous Mar 15, 2014

    mazda b2200 spews water from radiator cap

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

Those are average numbers and they are a little on the low but that is typical considering the age of the vehicle the compression should be 115 -120 psi.. hope this helps please rate this...thanks

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1988 b2200 is overheating--we've changed out the lower radiator hose, thermostat, and the upper hose is fine. Why is it overheating? Radiator, heat pump, or water pump?


!st check and make sure the water is flowing in the radiator, then check
the timeing, Mazda will run hot if the timeing is rong.

Jul 19, 2012 | 1988 Mazda B2200

2 Answers

1990 mazda b2200 clutch sticks to floor


Check the fluid in the hydraulic clutch resevoir.

Aug 10, 2011 | 1988 Mazda B2200

1 Answer

Where is the fuel pump on a Mazda 1988 b2200


Should be located at the rear of the engine block on the passenger side, attached to the cylinder head I believe.

Jan 09, 2011 | 1988 Mazda B2200

1 Answer

87 mazda b2200 turns over no start. is gettin fuel and i see the spark on the plug working. what am i missin?


the only other things are compression and timing, and incorrect cam timing can cause low or no compression. Is the timing belt moving, is the camshaft turning? I will bet your trouble is the timing belt.

Mar 11, 2010 | 1988 Mazda B2200

1 Answer

I need torque specs for the head on a 93 mazda b2200 2.2l 4 cylynder


First Step: 20 lb/ft
Sec Step: 40 lb/ft
3rd Step: 59-64 lb/ft

Feb 05, 2010 | 1988 Mazda B2200

1 Answer

Mazda engine bad


yes, i believe you could put any engine on your pick-up provided it is the rear wheel type set-up and the engine comes with its own tranny. problem is, if changing the engine mounts, tranny mounts, wiring set-up and exhaust system layout would not be of any problem to you. might as well look for the same mazda engine you have as a replacement to ease installation.

Apr 14, 2009 | 1988 Mazda B2200

1 Answer

B2200 Chassis prt number


They are two totally different frames. The 2200 is a Mazda sourced vehicle while the 2500 is Ford sourced, based on the Ranger pickup.

Mar 11, 2009 | 1988 Mazda B2200

2 Answers

1990 mazda b2200


i just bought an 88 that crazy overheated could only drive for 30 mins before had to stop. no leaks anywhere, did a compression check on the cylinders,checked out. no water in oil. took the radiator to a shop theyll do a flow test for free, got mine fixed for like 80 bux but you can buy a new one for 120. the white smoke might be your fuel filter

Jul 31, 2008 | 1988 Mazda B2200

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,393 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...