Question about 1992 Nissan Stanza

1 Answer

Car won't start

When trying to turn on ignition, solenoid clicks but car will not start. Checked fuselink(s), has a brand new alternator and battery is charged. Sometimes pumping clutch seems to get the car started.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 63,291 Answers

I suspect you have burned contacts in the starter solenoid, either replace the solenoid or the entire starter

Posted on Sep 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

It wont turn over we have checked the ignition changed all teh relays. it will start on occasion but after once it wont so anything but click once. not the starter or the ignition and the battery is brand...


If the engine doesn't turn over it is not a fuel issues as fuel will keep it from starting. However the engine will still turn over what is more likely is a starting system concern since it just clicks it is probably the starter or starter circuit. again the fuel pump cut off only turns off power to pump which will cut fuel.. engine will still crank.

Oct 30, 2013 | Mercury Mystique Cars & Trucks

2 Answers

2005 gmc yukon won't turn over even after replacing a new battery


does the security light come on? You might have to sit there with the key in the "ON" position for 10-15 minutes until the security light goes off to reset the security system.

Apr 21, 2013 | 2005 GMC Yukon Denali

2 Answers

Car won't start


Anything is possible, but I doubt the new battery has failed.
Chances are the alternator is not charging the battery.
The alternator should be able to power the headlights and engine once it starts.
You also need to know why the battery went dead overnight.

Feb 01, 2013 | 2007 Mazda 3

2 Answers

2005 Altima won't start, hear clicking sound coming from fuse box,key stuck in ingintion,won;t turn over,tried to jump start.


the clicking that you hear is coming from the starter relay. sounds like your ignition starter switch or ignition lock cylinder is bad.

May 30, 2012 | 2005 Nissan Altima

2 Answers

Vw passat no power and no crank


Dear Sir:
See the diagrams attached and proceed with logic system troubleshooting. Look for vibration, loose wires, dirty, dust, corrosion, solenoid defective.
God bless you

5_25_2012_9_15_54_am.jpg5_25_2012_9_16_19_am.gif5_25_2012_9_17_04_am.gifYou can bypass the switch ignition connect one side to the positive batery and the other in the starter solenoid, must be RUN, and isolate the problem.
5_25_2012_9_18_22_am.jpg

May 24, 2012 | 1998 Volkswagen Passat

1 Answer

Car will not start, could it be the solenoid


Check the wires. if there dirty or open you wont get enuf power to itand check your pwer and ground

Dec 27, 2011 | Cars & Trucks

1 Answer

Car will not start. Brand new starter, wire to starter test good, good battery relay tested good. Why won't it start?


Is the ignition switch good? If the starter/solenoid; starter relay, battery and cables are all good that is about the only thing left.

Do you hear a click when you turn the switch?

Jul 30, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

My 1999 mitsubishi diamante will not start. I got a friend to jump it but it still would not start. I took the battery out and took it to autozone to charge it. But autozone would not charge it because...


It sounds like you need a new starter. If you hear the starter click when you turn the key to start, replace your starter since you already replaced the battery. You might want to have your alternator checked out, or when you get your car started, test the battery terminals with a multimeter. You should have around 14 volts with the car running. If not, you will need a new alternator. The alternator won't keep the car from starting though, unless the battery was drained because it wasn't charged. Even then it is the battery keeping the car from starting.

If the starter is not clicking, check your fuses under the hood. If all checks out, you may have a bad ignition switch.

Jul 02, 2011 | 1999 Mitsubishi Diamante

Not finding what you are looking for?
1992 Nissan Stanza Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...