Question about 2002 Jeep Liberty

1 Answer

Dash lights are not working on my 2006 jeep liberty

Posted by on

  • yadayada
    yadayada May 11, 2010

    What have checked to try and correct this problem?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

MAKE SHURE DIMMER SWITCH IS NOT IN THE "OFF" POSITION. SWITCH IS OART OF THE TURN SIGNAL STALK

Posted on Jan 02, 2009

6 Suggested Answers

  • 137 Answers

SOURCE: Inoperable Power Window 2006 Jeep Liberty

the window regulator needs to be replaced

Posted on Jan 19, 2009

Mikey108
  • 475 Answers

SOURCE: i have a 2006 jeep liberty and three lights are staying lit and

You need to take the jeep to a dealer or a good mechanic who can retreive the codes out of the computer. You may have a module problem but I will not guess without knowing the codes.

Posted on Feb 11, 2009

  • 249 Answers

SOURCE: 2005 jeep liberty brake lights will not work. I

brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.

Posted on Aug 15, 2009

  • 521 Answers

SOURCE: 2006 JEEP LIBERTY BATTERY LIGHT KEEPS GOING ON AND OFF

have the alternator tested as well as the battery.

Posted on Oct 17, 2009

  • 16 Answers

SOURCE: power mirrors stopped working

If both power mirrors stopped working at the same time it has to be a fuse or the switch has come unplugged, or it has become defective. mike
micmor68@gmail.com

Posted on Nov 02, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2006 jeep liberty and the lights on the power windows switch will not work. Have checked fuse not sure what to do next.


make sure the dash lights are not on the dim setting. The window switch runs its lighting from the dash light dimming switch as well. If all is ok, I would suspect a faulty window switch assembly

Apr 05, 2015 | 2006 Jeep Liberty

1 Answer

Fuse box number for dash lights for 2006 jeep liberty?


Should be labeled, but if not, just check them all.

Jul 08, 2014 | 2006 Jeep Liberty

1 Answer

My 2006 jeep liberty abs bas light as well as car with sqiggly lines come on dash


I suggest scanned the computer in order to know what is the specific fault code stored there; note it and send us for other details.

Dec 05, 2012 | 2006 Jeep Liberty

1 Answer

I have no dash lights in my 2006 jeep liberty renegade. I cant see a fuse for this. what else could it be


Most likely, you have a dial or switch to adjust the brightness of the dash lights. Make sure it is not turned all the way down. Also, on some Chrysler vehicles, you are also able to override (turn off) the overhead interior lights by turning it all the way down, so you can leave doors open without draining the battery. If that is not it, there is a fuse for your dash lights. Refer to your owner's manual for the fuse position in the fuse block, as well as the correct type of fuse and amperage rating.

Sep 30, 2012 | 2006 Jeep Liberty Renegade

1 Answer

Jeep Liberty 2006, interior dash light and radio light do not work. Not sure this is a fuse problem, any suggestions to what else I can troubleshoot?


usually when a dash light quits working it is a bulb that has burned out. you have to pull the dash and replace the bulb that is behind that has burned out. you can usuall find the bulbs at the auto parts store but some you have to get from the dealer. the auto part store sells some good repair manuals that should lead you step by step how to do it. if the book is sealed the cleark at the part store will usually let you open it to see if it has the details you are looking for. hope this helps.

Jan 30, 2010 | 2006 Jeep Liberty

1 Answer

Neither turn signals work on jeep liberty 2006 sport


Signals are now controlled by a module on the right side of the steering column under the dash. Before doing anything yourself, bring it to the attention of the guys that did the rear...This problem can happen at any time but they may have disconnected a harness or ground while working, so give them a chance first to correct it.

Jun 18, 2009 | 2006 Jeep Liberty

1 Answer

I have a 2006 jeep liberty and three lights are staying lit and


You need to take the jeep to a dealer or a good mechanic who can retreive the codes out of the computer. You may have a module problem but I will not guess without knowing the codes.

Feb 11, 2009 | 2006 Jeep Liberty

Not finding what you are looking for?
2002 Jeep Liberty Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...