Question about 1999 Pontiac Grand Prix

1 Answer

Driver's side head light

What is the easiest way to get behind my driver's side head lamp to change the bulb?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

There is 2 plastic clips behind the headlight, lift these up and pull the headlight out. Then just twist the plastic cap out of the headlight and replace. (Do not touch the bulb when replacing). Then put headlight back in all the way and slide the plastic retainer clips back into position.

Posted on Oct 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why do all lights work except low beam driver side head lamp?


Seems like if your other low beam is lit, there's something wrong with the new bulb. Make sure it's the exact type needed, and switch the working bulb from the pass. side to drivers side to check.

Feb 22, 2016 | 2010 Nissan Altima

1 Answer

1991 Toyota Camry: How do I change the headlamp bulb on the driver's side? What steps need to be done?


Hello first start by opening your engine hood rite behind your head lamp pot is a plug socket simply twist counter clock wise and socket will come out remove bulb and replace turn clock wise to tighten up turn head lights on to check that new bulb works both high and low beam you have now changed your head lamp bulb and restored your lights

Jan 23, 2011 | 1991 Toyota Camry

1 Answer

How do i replace the low beam headlamp on a 2008 mercedes?


Under the hood, there are two round head lamp covers on each side. One for high beam and one for low beams. The low beam is the outer cover. Turn this cover counter clockwise and remove. This will expose the back of the bulb. There is a small clip holding the bulb into the headlight housing, but you must unplug the light before removing clip. Once you have unplugged the light, the small metal clip can now be undone. on the side opposite the hinge, push the clip in towards the casing and then to one side (which way to push depends on which light it is.) Then the clip will release. you can now remove the bulb. place new bulb in and make sure it securely fits into position. reinstall the clip and reconnect the power. check for propeer function of the lamp before replaceing the cover. Once you confirm lamp is working replace cover and you are done.

This is easiest to see on the passanger side light. The driver side is slightly more cramped.

Jan 05, 2011 | 2008 Mercedes-Benz Mercedes Benz C Class

1 Answer

Need to change a light bulb front drivers side regular beam. How do I do it??


There are 2 release tabs directly behind the head lamp assembly.Just pull up on them and pull straight out on the head lamp.It should come out.Then replace the bulb.Hope this helps.Good luck.

Aug 19, 2010 | 2001 Chevrolet Malibu

1 Answer

Having problem replacing the driver side head light bulb.


Look for stainless steel clips above the lamp assembly in the support frame around the radiator and grill. Lift these clips straight up to allow the lamp to tilt forward letting you reach behind it to un-clip the pigtail and turn the retainer ring counter clockwise. Pull the bulb straight out the rear of the lamp assembly, keep bare fingers and dirt off the new bulb glass and reverse the order of dis-assembly.

Jul 02, 2009 | 1999 Ford Expedition

1 Answer

How change headlight on hyundai 2001 xg300


Remove the head lamp and disconnect the head lamp connector. 0f7fe9f.jpg Remove three 10mm bolts Unscrew the headlamp bulb CAPS to access bulbs. 5502d76.jpg

Jun 13, 2009 | 2001 Hyundai XG300

2 Answers

Need to replace head lamps on Ford Escape 2001,


there are 4 bolts that hold lamp in. the first 2 are obious. the others are behind the front bumper..the bumper must be removed to expose them...here is a cpoy of the manual to change..good luck

Headlamp Assembly Removal and Installation
  1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
    Remove the front bumper cover. For additional information, refer to Section 501-19.
  1. NOTE: Pull headlamp assembly forward to access electrical connectors.
    Remove the headlamp assembly.
    1. Remove the three bolts.
    1. Loosen the nut.
    • Disconnect the electrical connectors.
    a0045726.gif
  1. To install, reverse the removal procedure.
    • If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment in this section.

Apr 22, 2009 | 2003 Ford Escape

1 Answer

Signal light bulb change/who and where


  1. From under front wheelhouse, remove access cover behind park and turn signal lamp
  2. Through access hole in wheelhouse, rotate park and turn signal socket counterclockwise one quarter turn.
    1. Pull socket from back of lamp.
    2. Pull bulb from socket. INSTALLATION
      1. Align key on bulb base to groove in socket and insert bulb into socket.
      2. Through access hole in wheelhouse, insert socket into back of lamp.
      3. Rotate park and turn signal socket clockwise one quarter turn.
      4. Install access cover and verify lamp operation.
Hope this helps with your prob

Mar 27, 2009 | 1998 Plymouth Voyager

1 Answer

CHANGING HEAD LIGHT BULBS IN 2002 CHEVY S-10


Right behind the light there should be 2 clips pull up on those and the headlight will come out to change the bulb

Dec 13, 2008 | 2002 Chevrolet S-10

1 Answer

How to change front driver side turn signal bulb


For Front turning signal, you need to remove the whole head light system to get to turn signal. 4 screws attach it to the car's body. Make sure to remove the lamps first and disconnect the switch for the turn signal lamp. Just replaced it last week myself.

Oct 15, 2008 | 2003 BMW 5 Series

Not finding what you are looking for?
1999 Pontiac Grand Prix Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...