Question about 2005 Nissan Titan

2 Answers

Batery change I replaced the battery and on reconnection of the new battery the horn starts honking repeatedly.

Posted by on

  • star77 Sep 23, 2008

    I do not have a remote

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 705 Answers

If you don't have the remote, just use your key. put it into the door lock and simply turn the key, that will shut off the alarm.

Posted on Sep 26, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 958 Answers

It triggers the alarm.

use your remote sensor to turn it off.

tnx 4 using fixya,

drcool

Posted on Sep 23, 2008

  • francis rivero Sep 23, 2008

    ok...so you are not using your alarm anymore but when you replaced your battery, somehow it triggers the alarm, you have to disable your alarm by finding it and removing the fuse that powers it.

    even the horn is honking repeatedly, can you start your vehicle? try to start it and see if it would start...

    keep me posted,

    tnx ,
    drcool



×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On 2002 olds Intrigue, installing new horns but as soon as wires are plugged in horn honks . Removed horn fuse and relay but horn still honks .when pushing horn button ,with no horns, the relay clicks


You may have wires that have become crossed. The wire to the horn and a hot wire have probably lost the outer insulation and crossed each other causing the horn to start honking when it is connected. Check the wires with an electrical tester.

Oct 25, 2016 | Cars & Trucks

1 Answer

How do I reset TPMS light focus 14


Use this if you're installing winter wheels/tires that have sensors already installed, or even if you are just doing a tire rotation. Not sure if this has been posted before. I tried searching but didn't see it posted anywhere. No need to go and buy the TPMS learning tool.

1) Make sure your tiresare inflated to the recommended psi. Mine is 40psi.

2) Turn ignition to the on position. If you have a push button start, push the start button without pressing the brake pedal.

3) Push the hazard light button 6 times. The horn should honk and you should see "Train left front tire" in the LCD display between the tach and speedo.

4) Release air pressure in the front left tireuntil you hear the horn honk. The LCD display should now read "Train right front tire".

5) Release air pressure in the right front tire until you hear the horn honk.

6) Repeat for the the right rear tire, and then the left rear tire.

7) You should now see "Training Complete" in the LCD display.

8) Fill your tiresback up to the recommended pressure.

Enjoy!

Nov 19, 2014 | Cars & Trucks

1 Answer

99 dodge ram truck headlights wont come on and


flat battery , causing the anti theft system to cut in would be my first guess, when changing the battery make sure at least one door is open as when reconnecting new battery the anti theft will most likely lock the vehicle

Oct 18, 2014 | Cars & Trucks

1 Answer

Immobilizer won't reset on 2002 kia Rio


put fuse back in disconnect batt wait 60 seconds re attach, when the horn starts honking lock and unlock drivers door with the key while doors closed window down. get in car and start it, should be fine now.

Mar 12, 2013 | 2002 Kia Rio

1 Answer

The horn honks when I reconnect the battery


Hi,
If the horn only honked once it may be a symptom of your car alarm being set off after power has been re-applied. If the horn stays on after you reconnect the battery you have either a stuck horn button on your steering wheel or a stuck horn relay. Or it could be the alarm sounding the horn but that usually that occurs in a series of horn blasts (rather than continuous) and the car indicators usually flash in sync with the alarm sounding.
If the horn is stuck on in a continuous blast ie not sounding on and then off and then on etc etc, disconnect one the battery cables then pull the fuse that feeds the horn or pull off one of the removable spade electrical connectors from one of the 2 terminals on the horn itself. Usually the fuse box is either under the dashboard on the drivers side or could be under the hood. Consult your user manual for your car for fuse and horn locations.
If the horn is stuck you need to visit a qualified auto electrician, or perhaps you have a friend who knows his way around auto electrics?
Cheers,
Steve (Melbourne, Australia)

May 12, 2010 | 2002 Acura 3.2TL

1 Answer

We are installing a battery in our 2000 xterra the horn starts to honk. How do we install without the horn honking


This looks like you have a alarm problem,take the keys out and replace battery,if it starts honking press alarm off.If this don't work you have to find a Nissan workshop to calibrate the alarm and computer.It might be so bad that the car wont start at all after a battery change and that,s because the car was powerless for a short while and the computer thinks its been stolen and hotwired.God luck

Dec 12, 2009 | 2004 Nissan XTerra

1 Answer

My battery is dead and my horn keeps honking and wont let it take a jump start how do I get the horn to stop


Try disconnecting the battery for 5 minutes. then when you reconnect the battery lock and unlock the drivers door with the key, door closed. this will on some models deactivate the anti theft system. but it must be done with the hood closed and all the doors closed and from outside with the key. mike

Jan 04, 2009 | 2005 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...