Question about 1995 Oldsmobile Cutlass Ciera

1 Answer

Crouse control coruse will not work, replaced switch on leaver.

Posted by on

  • ingbor Mar 28, 2009

    My light for ABS is on all the time and my cruise control no longer works. The ABS brakes are not operating either. I will attempt to replace the brake switch on the brake pedal. Once I purchase a new one I will know what it looks like. Is it obvious once I get under there where it goes or is it hidden somewhere?




1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 295 Answers

Since you replace the switch on the lever, I will assume that part is okay, The cruise control module is not engaging or the brake switch on the brake pedal is shorted out. I would replace the most cost effective part next and that would be the brake switch on the brake pedal. The fuses should be okay I hope .

Posted on Mar 18, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Abs light comes goes out then comes back after starting engine on a 2003 chevy S10 4x4

Check for proper opperation of vehicle wheel speed sensors and disk brakes in general ware fluid level that sort of thing
Also problems with coruse control or brake release switch could effect it

Aug 19, 2016 | Chevrolet S 10 Cars & Trucks

1 Answer

2005 mazda 6/ Crouse control stopped working but the power light is,still on.

any error codes on dash, look under hood and check to see if all wires and hoses are connected to unit, and there are more that one fuse for it. start basic or you will end up spending money that you don't have to..

Dec 11, 2015 | Mazda Cars & Trucks

1 Answer

Car will not start or turn over at all unless the automatic shifter is fooled with then it still doesn't start at times???

There is a safety switch in the start system, generally located down at the transmission where the shift cable joins the shift leaver if you have to jiggle around the shift leaver that switch is having problems working right and needs to be replace, or cleaned and adjusted

Oct 22, 2015 | Cars & Trucks

3 Answers

I have a Ford 1990 f250 xlt 7.5 When starting revs up and down slowly then dies sometimes, why?

Clean the throttle body and idle air control motor(IAC) on the side of it. Mostly the IAC and the hole it sets in. Also check the air filter.

Apr 26, 2015 | 1990 Ford F250

1 Answer

Head lights turn off

Check your head light switch,a bad fuse means they wouldn't come on,the bulb socket could have corusion build up in them,causing them not to get a good connection.Check this first.

Jan 07, 2013 | 2002 Dodge Stratus

1 Answer

Turn cruse on light on dash shows to be on but will not set speed ?

There is a switch that links the brakes to the cruse control unit it works off the brake light switch . You see the crouse control needs to know when the brake is applyed so if you hit traffic it will shut it off . This is likely your problem look under the dashboard it will be close to the brake switch on the top of your pedal and have a wire connecting to that switch

Mar 29, 2011 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

Turn signals only work sometimes

the multi swich if folty rilpas it . It hapens alot comon cost . All so it hase a ricall on the clock spring for the horn air bag and crous control.

Jan 20, 2011 | 2000 Chrysler Town & Country

1 Answer

1998 chavy. blazer cruise control & wipers stop working.

Start with the simple and check the fuses, the other place to move on to would be the cruse and wiper control switch on the leaver. You can buy the replacement leaver control at Auto Zone and they will have the step by step instruction for you to get the job done.
Good luck and keep us posted. You also my want to inspect the wire harness to your cruise control and wiper motor. The harness both run together on the drivers side along the brake boost and the connections my have some corrosion on it or just come loose.

Aug 05, 2010 | 1998 Chevrolet Blazer

Not finding what you are looking for?
1995 Oldsmobile Cutlass Ciera Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides