You can get the code yourself with this Van. Here's how get in the drivers seat, shut door, put key in ignition, Make sure every thing such as lights, radio, heaater, AC, etc is off. Then turn the key on but (Do not turn over motor) then back off. repeat on, off , then on STILL NO TURNOVER leave IT ON then check light in the dash will flash 1 flash break 2 flash 3 flashes total this means is has the code. And the following flashes are the problem code. So pay close attention after the initiual 3 count the following flashes there will be 1 set break 2nd set write both these numbers down. Say it flashes 4 times break then 8 then 48 is the problem sometimes there will be additional problems so watch for more codes and write them also, You can then look up the 2 number codes in a repair manual or check with a parts store etc. note: if you this you miss counted or are not sure you did this correct. You may repeat as many times as you need. turn on, turn off, on, off ,on leave count try to do it quick and smooth.
291 views
Usually answered in minutes!
×