Question about 2003 Pontiac Grand Prix

1 Answer

I got the code just don't no how to put it in

Posted by on

  • yadayada
    yadayada May 11, 2010




1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Unlocking the Theft Deterrent Feature after a Power Loss Enter the secret code as follows, pausing no more than 15 seconds between steps:

  1. LOC appears when the ignition is ON.
  2. Press MIN and 000 will appear on the display.
  3. Press MIN again to make the last 2 digits agree with the code.
  4. Press HR to make the first 1 or 2 digits agree with the code.
  5. Press AM-FM after you have confirmed that the code matches the secret code that was written down. The display will show SEC, indicating the radio is now operable and secure.
If you enter the wrong code 8 times, INOP will appear on the display. You will have to wait an hour with the ignition ON before you can try again. When you try again, you will only have 3 chances to enter the correct code before INOP appears.

Posted on Oct 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Maintenance Code 128

Put your vehicle & OBD2 Code 128 into google

We don't have manufacture codes

Nov 19, 2012 | 2006 Isuzu Ascender

1 Answer

How fix code p1698 on 97 Chrysler

Put that code into google to see what it is & the fix

We don't have it

It is manufacture code, not generic PO code, unless
you find that not to be true on the net

Put in OBD2 P1698

Sep 15, 2012 | Cars & Trucks

1 Answer

We replaced my 94 honda civics battery, and the stereo says code, so I found the code in the manual but i don't know how to put it into the stereo.. Help!?

Use the number keys and input the code careful not to put in wrong code cause after so many attempts it will lick the radio completely.

Jun 29, 2012 | Cars & Trucks

1 Answer

Code radio for 5FNRL38877BO11194

You go to the dealer with your VIN# & proof of ownership,
they will help you,write down how to put the code in.

The purpose of the code, is so it won't work in another veh
You don't give out any codes or number on the internet.

May 31, 2012 | 2007 Honda Odyssey Touring

1 Answer

The battery was disconnected and now that it is connected the stereo won't work unless i put a code in and i don't know the code because i don't have a manual. i think the manual might be in...

you need to contact the manufacturer of the vehicle and tell them the vin number and they can give you the code ( you could pay a fee for this info ) this solution only works if the stereo is an original fitment to this vehicle.

Aug 14, 2011 | Ford Festiva Cars & Trucks

1 Answer

I put in the wrong code for the radio in to many times after changing the battery in my 2000 Odyssey, I now know the code for my radio but the device is locked and i need help unlocking it.

Just wait one hour and it will reset and you can then try it again. You have ten chances. If for some reason you start to put it in wrong again, just put in any digits as if that were the 5 digit code. If you don't complete, it will lock again and you will need to wait another hour. I hope this helps and good luck.

Jun 29, 2011 | 2000 Honda Odyssey

1 Answer

Transmission is going in nuetral when you put it

You might have a trans range selecter switch ( neutral safey switch going bad) going bad. If the check engine light is on, go get the codes read. Let me know what codes you have if you don't get it read at a Suzuki dealer. Don

Oct 03, 2009 | 2006 Suzuki Forenza

1 Answer

I have an '07 suzuki forenza has 30,000 miles on it the check engine light came on and hasnt came off since car jerks when put on drive can anyone help

Take the car in somewhere and see what thew check light code is. If the trans jerks when put in gear, it might be the transmission range switch ( neutral safety switch) See what the code is first and go from there. Any questions after the code reply back to me, Don Suzuki tech

Mar 29, 2009 | 2006 Suzuki Forenza

Not finding what you are looking for?
2003 Pontiac Grand Prix Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides