Question about 2000 Volkswagen Golf

1 Answer

VW Mk 4 golf heater fan settings 1-3 not working but 4 does. Can anyone help? The fan will only work on the higest setting but does not work on the lower setting. I can hear the A/C kicking in when you move the switch to 1 but no air through the vents.

Posted by on

  • Anonymous Mar 27, 2014

    vw golf 1 fan take more time to kick in and also take around ten minutes to switch if after i turned off the engine

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

It's most likely to be the resistor, it's a common problem. You should be able to get one at your local motor factors or breakers yard and they are generally easy to fit. Not sure of its position on a golf - check a haynes manual or ask your local garage.

Posted on Sep 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I disconnected the battery from my 2001 Volkswagen golf V5, now i dont know the code for the radio... can anyone please help..!! (:


IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

May 12, 2011 | 2001 Volkswagen Golf

1 Answer

VW Golf security/central locking overridden by another fob.


is a cheap alarm. change it wih a proper one.
both of you have alarms which is working on the same freqvency. the same alarm, or just weird coincidence.

Feb 27, 2010 | 2003 Volkswagen Golf

1 Answer

Heater blower switch will only work at possion 4


Underneath the glove compartment on the passenger side is a cover which must come off,2 plastic screws holding this cover.Underneath you will find a 5 pin connector[big plug] connected to a white connector in the blower fan housing.This is called the fan resistor which controls the blower fan speed.Unclip the resistor out the housing and renew.Your problems should be solved..regards

Dec 21, 2009 | 2005 Volkswagen Golf

4 Answers

2000 VW Golf. My windows and sunroof won't close (no noise, no trying, nothing) but everything else seems to work fine. Any ideas?


Fuse blown - look for the one with the key symbol it powers windows/locks/interior lights/sunroof operation. Then work out why it blows...could be anything on the circuit so check a lock isn't sticking on/off when operating the central locking.

Aug 03, 2009 | 2000 Volkswagen Golf

2 Answers

Vw golf mk 4 electrical problem


CHECK AUXILIARY BELT FOR DAMAGE AND ALTERNATOR BRUSH LENGTH

Jul 20, 2009 | 1999 Volkswagen Golf

1 Answer

VW Golf mk 5 rear door handle faulty


there will be a screw behind the rubber this holds the handle in., if the door has not been used much, greaseing the mechanism may solve this

Oct 26, 2008 | 2005 Volkswagen Golf

Not finding what you are looking for?
2000 Volkswagen Golf Logo

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...