Question about 2000 Honda Accord

1 Answer

2000 Accord LX, 4 Cyl. check engine light and error codes P1457, P1739

Hi, my 2000 Accord LX, 4 speed automatic, 116 thousand miles, has the check engine light on and Auto Zone told me I got the error codes P1457 and P1739. I'm particularly concerned about the latter, which says automatic transaxle concern, because I can't afford a new transmission. Any ideas what could be wrong with my car and how to remedy it?
Thanks so much in advance!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 116 Answers

A very common late 90's code, P1457 is a failure in one of the evap system solenoid valves. There are 2 culprits, the Vent Control Valve & the 2 Way Bypass Valve. So, start working with those and see if you can get the 1457 code off of it.

I also looked around about the 1739 code as well which a transaxle error. However, I've found that there has been more than enough reported cases of problems of the such. Take a look at this link, and do a little reading.

http://www.hondacarforum.com/honda-2/13499-trouble-code-p1739.html

I hope this helps you out.

Posted on Sep 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does code B12 and a wrench symbol mean on a Honda Accord?


That you need to go to ur dealer to have the engine serviced(oil change) it's a maintence code if you are a diyer the code description will be in your manual as to what needs to be performed for this service

Jul 14, 2014 | 2012 Honda Accord LX-S Coupe 2.4L 4-cyl....

1 Answer

Error code P1457 2000 Honda Odyssey


this code is sometimes set because of a loose gas cap or a leaking gas cap. the code is set when the fuel vapor management system detects a leak.

Feb 27, 2013 | Honda Odyssey Cars & Trucks

1 Answer

Dtc p1457,0107


P1457 HONDA - Evaporative Emissions Control System Leakage EVAP Canister Systemxicon.jpghttp://engine-codes.com/p1457_honda.htmlForum CodePossible causes- Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap There is a Honda factory service bulletin with information on how to diagnose the P1456 on the following Honda models:
1998 Honda Accord
1999 Honda Accord
2000 Honda Accord
1998-2000 Honda Accord
symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vaporsP1457 HONDA Description The evaporative emission (EVAP) control system stores fuel vapor from the fuel tank in the EVAP canister temporarily to prevent it from escaping to the atmosphere and to enable it to be drawn into the engine by intake manifold vacuum and burned. In addition, the onboard refueling vapor recovery system (ORVR) stores fuel vapor generated when refueling in the EVAP canister.

The EVAP control system leak detection method improves the accuracy and frequency of the detection by determining faulty components and vapor leakage for each part. The EVAP control system (from the purge valve to the fuel tank) is divided into two parts. One is the "EVAP Canister Side" (from the EVAP two way valve to the purge valve) and the other is the "Tank Side" (from the EVAP two way valve to the fuel tank). There is 0.04 inch leak detection and 0.02 inch leak detection. If the 0.04 inch leak detection results are OK, the 0.02 inch leak detection runs. The P1457 code is detected when the EVAP system has a very small leak.

P0107 HONDA - Manifold Absolute Pressure Sensor Circuit Low Voltagexicon.jpghttp://engine-codes.com/p0107_honda.htmlForum CodePossible causes- Manifold Absolute Pressure harness is open or shorted
- Manifold Absolute Pressure sensor poor electrical circuit connector
- Faulty Manifold Absolute Pressure sensor
- Faulty Engine Control Module (ECM) When is the code detected?An excessively low voltage from the sensor is sent to ECMSymptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Engine rough idle
- Engine hesitation
P0107 HONDA Description The Manifold Absolute Pressure sensor provides instantaneous manifold pressure information to the engine's Engine Control Module. The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.


In some vehicles the absolute pressure sensor is built into ECM. HONDA Technical Service Bulletins for P0107 code1999 HONDA ODYSSEY Electrical System 2000 HONDA ODYSSEY Electrical System1998 HONDA ACCORD Electrical System 1999 HONDA ACCORD Electrical System 2000 HONDA ACCORD Electrical System 2001 HONDA ACCORD Electrical System 2002 HONDA ACCORD Electrical System 1996 HONDA CIVIC Electrical System 1997 HONDA CIVIC Electrical System 1998 HONDA CIVIC Electrical System

Jul 25, 2012 | Honda Civic Cars & Trucks

1 Answer

Honda Accord EX 4 cyl. 1998 has troubleshooting which has the code P1457 . What is this ?


p1457 is an evap code. If you where to bring it to the dealer they would be able to run a complete evap system test and tell exactly what the problem is. I've run this test on over a 100 accords like this and 90% of the time the fault is in the cvs valve. (canister vent shut valve). Its located under the vehicle closer to the rear, on the side of the evap canister. the part runs approx. 100-175 dollars. Good luck hope this helps!

Dec 20, 2010 | 1998 Honda Accord

1 Answer

Lx, 4 cyl, AT...approaching 90,000 mi...when


90k miles, recommended to replace also the water pump, idler and tensioner pulleys. Shop costs (3hr labor) $450-$750 depending on their labor rate and parts price.

May 13, 2010 | 2000 Honda Accord

1 Answer

Oil spec


1995 HONDA ACCORD 2.7L 6-cyl Engine Code C27A4 C27A1

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,MPZA......AF2

CAPACITIES:
Engine, with filter..........4.4 liters
Automatic Transmission, MPZA Initial Fill..........2.7 liters
Automatic Transmission, Total Fill
4 speed MPZA..........6 liters
Manual Transmission, ..........1.9 liters

1995 HONDA ACCORD 2.2L 4-cyl Engine Code F22B1 VTEC

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,A0YA......AF2

CAPACITIES:
Engine, with filter..........4.3 liters
Automatic Transmission, A0YA Initial Fill..........2.4 liters
Automatic Transmission, MP0A Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A0YA..........6 liters
4 speed MP0A..........6 liters
Manual Transmission, ..........1.9 liters

Jan 07, 2010 | 1995 Honda Accord

1 Answer

What is Honda's recommendation for the timing belt replacement interval of a lightly driven(highway, speed limit miles) 2005 4 cyl Honda Accord LX?


doesnt matter on speed or abouse,,,miles matter every 50,000,,its cheaper than buying a engine when it breaks,,

Oct 12, 2009 | 2005 Honda Accord

1 Answer

P1457 code manufacturer control


on the V-6 or the 4 cylinder models, this would mean that your o2 sensor heater circuit, if you had this replaced the last time, I would check the connections, they may be loose, Good Luck!

Sep 23, 2009 | 2000 Honda Accord

1 Answer

I have an 89 Honda Accord lx and it idles too low


The idle speed for my 88 accord lx is 700-850 rpm for standard idle speed. The stalling is a seperate issue. When were plugs, wires, air/gas filters and distributor last checked? How long has engine been running for when you stall? Is the temprature gauge high? Any lights coming on when stall occurs? I am not a mechanic, but a DYI'er. These are common questions I am always asked when troubleshooting my Honda. :)

Sep 17, 2009 | 1989 Honda Accord 4 Door

1 Answer

Check engine light


if you have undser 80,000 miles the convert. will be covered under warr. the other code is a possible need trans replacement

Dec 30, 2008 | 1998 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

2,379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...