Question about Chevrolet Malibu

1 Answer

Power window came off track how do i put it back on

Posted by on

  • Anonymous Jan 24, 2009

    97 Lexus 300ES. Drive side window came off the track.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

You will have to remove door panel and see why it came off most likely a bad window regulator

Posted on Sep 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

1 Answer

Window off track


what kind of vehicle?

Dec 22, 2011 | 1994 Mercury Villager

1 Answer

Back seat passenger power window of a 2003 ford explorer is not working. I can hear the motor working but the window doesn't go up or down. I can push it up and down manually but now the window is inside...


The window came off the tracks. You will need to take the inner door panel off and get to the window track and put the window back in the track.

Jul 16, 2010 | 2003 Ford Explorer

1 Answer

WINDOW FELL OFF OF TRACK, HOW DO I PUT IT BACK ON.


High my name is Tom and I can help.

This is a fairly simple task, especially if you have power windows. The problem with much older cars was getting the window crank out.

With power windows, simply remove the carpet coated side panel and you will see the window off track. Put the window on track and try it a dozen times or until you are certain it is a fix. If not, I have a few more tricks up my sleeve. If you have conventional "cranking" Windows you will need a special handle tool you can purchase at any parts store. Milk the clerk with any questions or better still, email me back and I will walk you through this simple task. I have gotten handles off way before they made tools for the task.

Jul 07, 2010 | 1997 Buick Century

1 Answer

Hello my right power window is off track.how hard is it to dismantle and put window back on track.How do i get to the window/glass


You remove the door panel,to get to everything.
You may have to replace the window regulator or cable.
You don't just put it back on track,it broke.
Were long sleeves and thin gloves,to avoid cuts,while working inside the door panel

May 12, 2010 | 1998 Ford Expedition

1 Answer

Drivers side door will not go up or down; window is off track and door will not open


Hello. You have two choices here on how to proceed. Often when this occurs, it is a sign that the window motor and the track inside that door are on their "last legs" This assembly is called the power window regulator and it can be found on the net for about $75.00 So, you may either put the window back in the track and hope for the best or you may choose to replace the power window motor and the track, which comes as one unit called a driver's side door power window assembly. Either way, you have to remove the inner door panel to expose the track and the motor and the glass.

Jan 25, 2010 | 2002 Chrysler Concorde

1 Answer

Two door model(grand sport)power windows


Win came off track. Kind of tricky but remove panel screw etc and try to put back on track. Be careful not to get cut.

Jun 28, 2009 | 1997 Buick Skylark

2 Answers

I have a 06 saturn ion. my window will go up


towards the back of the door is a short track that runs left to right. there should be a nut either loose or missing on this track. put loctite on the stud, then put the nut back on. do this AFTER the window is back on track.

Apr 22, 2009 | 2006 Saturn ION

1 Answer

2002 Mitsubishi Mirage Driver Side Window


If it is a power window you will need to get a new motor for it.If its' a manual window crank it's just off the track you just gotta pull the door panel off to put it back on track you might have to go to a junk yard to get the parts to put it back on track.

Nov 06, 2008 | 2000 Mitsubishi Mirage

1 Answer

Power window


It is probably just off of the track. It could be worse. take the door apart and put the window back in the guide (track). Hope this helps.

Aug 31, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

991 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...