Question about 2004 Saturn ION

1 Answer

2004 Saturn Ion - No Reverse lights

I have a 2004 ion and the reverse lights have stopped working. I have checked the bulb and the fuses and all seem fine. Any suggestions on what I should check next?

Posted by on

  • 3 more comments 
  • darlene_918 Oct 08, 2008

    Thanks, this worked, you were right it was the switch.

  • jmb56 Nov 19, 2008

    Perfect! Same problem, but with a manual 2003 ION 2 (2.2L). What part number do I need?

  • inkeeper Nov 21, 2008

    How about on a manual transmission?

  • Anonymous Mar 14, 2014

    Revers light not working. Bulb and fuse are working fine.

  • Anonymous Mar 17, 2014

    2004 tracker check engine light out fuse ot bulb

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 61,129 Answers

The problem is most likely on the transmission range selector switch, this is on th top of the transmission and has a multi-wire connector going to it, a shaft goes through it and the trans shift cable is connected there.

Posted on Sep 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My backup lights are inop. Bulbs are new, both fuses pertaining to the reverse lights are good. Possibly the backup switch? Of so, how do I locate to check it? 2004 Saturn Ion 2 5 speed.


there shoudlbe a sensor or two wires coming from the transmision two female ends two male ends , if the arent conected thats your problem , good luck

Nov 08, 2010 | 2004 Saturn ION

1 Answer

How do you change a brake or 'taillamp' bulb on a 2006 Saturn Ion? The manual is not clear on how to do it. Much appreciated!


Pop your trunk, and you'll see two Torx screws on the side of the tail light assembly. Use your T-15 screwdriver on these.

The tail light assembly should easily slide out at this point. You'll see four connectors: a wiring harness, reverse light, turn signal, and brake light. Disconnect the proper connector, and you'll see the burned-out bulb. Give it a yank, and it will pop right out.

Jul 14, 2010 | 2006 Saturn ION

1 Answer

My reverse lights don't work on my 04 saturn Ion I have changed the bulbs and dont see a fuse for them please help


check the back up light switch located on the drivers side of the transmission

Jan 20, 2010 | 2004 Saturn ION

1 Answer

2004 Saturn Ion blinker problem!


Usually when the turnsignal blinks rapid this is a indicator that the turn signal bulbs is blown, you will need to check both the front and rear signal to see which is not working, and then change the blown bulb or bulbs.

Dec 16, 2009 | 2004 Saturn ION

1 Answer

The revers lights wont work, checked fuses and changed bulbs.


Check the operation of the reverse select sensor switch on the transmission.

Jun 15, 2009 | 2003 Saturn ION

3 Answers

The turn signals dont work


yes it could be a fuse or a bulb, if a bulb is out they wont work, check your fuses cause i am sure thats it

May 15, 2009 | 2003 Saturn ION

1 Answer

Put 2004 Saturn in reverse made bang noise then funny smell.


possible motor mount or tranny mount bad i would have them looked at

May 11, 2009 | 2004 Saturn ION

Not finding what you are looking for?
2004 Saturn ION Logo

606 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...